1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * QorIQ RDB boards configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_SYS_GENERIC_BOARD 14 #define CONFIG_DISPLAY_BOARDINFO 15 16 #ifdef CONFIG_36BIT 17 #define CONFIG_PHYS_64BIT 18 #endif 19 20 #if defined(CONFIG_P1020MBG) 21 #define CONFIG_BOARDNAME "P1020MBG-PC" 22 #define CONFIG_P1020 23 #define CONFIG_VSC7385_ENET 24 #define CONFIG_SLIC 25 #define __SW_BOOT_MASK 0x03 26 #define __SW_BOOT_NOR 0xe4 27 #define __SW_BOOT_SD 0x54 28 #define CONFIG_SYS_L2_SIZE (256 << 10) 29 #endif 30 31 #if defined(CONFIG_P1020UTM) 32 #define CONFIG_BOARDNAME "P1020UTM-PC" 33 #define CONFIG_P1020 34 #define __SW_BOOT_MASK 0x03 35 #define __SW_BOOT_NOR 0xe0 36 #define __SW_BOOT_SD 0x50 37 #define CONFIG_SYS_L2_SIZE (256 << 10) 38 #endif 39 40 #if defined(CONFIG_P1020RDB_PC) 41 #define CONFIG_BOARDNAME "P1020RDB-PC" 42 #define CONFIG_NAND_FSL_ELBC 43 #define CONFIG_P1020 44 #define CONFIG_VSC7385_ENET 45 #define CONFIG_SLIC 46 #define __SW_BOOT_MASK 0x03 47 #define __SW_BOOT_NOR 0x5c 48 #define __SW_BOOT_SPI 0x1c 49 #define __SW_BOOT_SD 0x9c 50 #define __SW_BOOT_NAND 0xec 51 #define __SW_BOOT_PCIE 0x6c 52 #define CONFIG_SYS_L2_SIZE (256 << 10) 53 #endif 54 55 /* 56 * P1020RDB-PD board has user selectable switches for evaluating different 57 * frequency and boot options for the P1020 device. The table that 58 * follow describe the available options. The front six binary number was in 59 * accordance with SW3[1:6]. 60 * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off 61 * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off 62 * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off 63 * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off 64 * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off 65 * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off 66 * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off 67 */ 68 #if defined(CONFIG_P1020RDB_PD) 69 #define CONFIG_BOARDNAME "P1020RDB-PD" 70 #define CONFIG_NAND_FSL_ELBC 71 #define CONFIG_P1020 72 #define CONFIG_VSC7385_ENET 73 #define CONFIG_SLIC 74 #define __SW_BOOT_MASK 0x03 75 #define __SW_BOOT_NOR 0x64 76 #define __SW_BOOT_SPI 0x34 77 #define __SW_BOOT_SD 0x24 78 #define __SW_BOOT_NAND 0x44 79 #define __SW_BOOT_PCIE 0x74 80 #define CONFIG_SYS_L2_SIZE (256 << 10) 81 /* 82 * Dynamic MTD Partition support with mtdparts 83 */ 84 #define CONFIG_MTD_DEVICE 85 #define CONFIG_MTD_PARTITIONS 86 #define CONFIG_CMD_MTDPARTS 87 #define CONFIG_FLASH_CFI_MTD 88 #define MTDIDS_DEFAULT "nor0=ec000000.nor" 89 #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \ 90 "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)" 91 #endif 92 93 #if defined(CONFIG_P1021RDB) 94 #define CONFIG_BOARDNAME "P1021RDB-PC" 95 #define CONFIG_NAND_FSL_ELBC 96 #define CONFIG_P1021 97 #define CONFIG_QE 98 #define CONFIG_VSC7385_ENET 99 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 100 addresses in the LBC */ 101 #define __SW_BOOT_MASK 0x03 102 #define __SW_BOOT_NOR 0x5c 103 #define __SW_BOOT_SPI 0x1c 104 #define __SW_BOOT_SD 0x9c 105 #define __SW_BOOT_NAND 0xec 106 #define __SW_BOOT_PCIE 0x6c 107 #define CONFIG_SYS_L2_SIZE (256 << 10) 108 /* 109 * Dynamic MTD Partition support with mtdparts 110 */ 111 #define CONFIG_MTD_DEVICE 112 #define CONFIG_MTD_PARTITIONS 113 #define CONFIG_CMD_MTDPARTS 114 #define CONFIG_FLASH_CFI_MTD 115 #ifdef CONFIG_PHYS_64BIT 116 #define MTDIDS_DEFAULT "nor0=fef000000.nor" 117 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ 118 "256k(dtb),4608k(kernel),9728k(fs)," \ 119 "256k(qe-ucode-firmware),1280k(u-boot)" 120 #else 121 #define MTDIDS_DEFAULT "nor0=ef000000.nor" 122 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ 123 "256k(dtb),4608k(kernel),9728k(fs)," \ 124 "256k(qe-ucode-firmware),1280k(u-boot)" 125 #endif 126 #endif 127 128 #if defined(CONFIG_P1024RDB) 129 #define CONFIG_BOARDNAME "P1024RDB" 130 #define CONFIG_NAND_FSL_ELBC 131 #define CONFIG_P1024 132 #define CONFIG_SLIC 133 #define __SW_BOOT_MASK 0xf3 134 #define __SW_BOOT_NOR 0x00 135 #define __SW_BOOT_SPI 0x08 136 #define __SW_BOOT_SD 0x04 137 #define __SW_BOOT_NAND 0x0c 138 #define CONFIG_SYS_L2_SIZE (256 << 10) 139 #endif 140 141 #if defined(CONFIG_P1025RDB) 142 #define CONFIG_BOARDNAME "P1025RDB" 143 #define CONFIG_NAND_FSL_ELBC 144 #define CONFIG_P1025 145 #define CONFIG_QE 146 #define CONFIG_SLIC 147 148 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 149 addresses in the LBC */ 150 #define __SW_BOOT_MASK 0xf3 151 #define __SW_BOOT_NOR 0x00 152 #define __SW_BOOT_SPI 0x08 153 #define __SW_BOOT_SD 0x04 154 #define __SW_BOOT_NAND 0x0c 155 #define CONFIG_SYS_L2_SIZE (256 << 10) 156 #endif 157 158 #if defined(CONFIG_P2020RDB) 159 #define CONFIG_BOARDNAME "P2020RDB-PCA" 160 #define CONFIG_NAND_FSL_ELBC 161 #define CONFIG_P2020 162 #define CONFIG_VSC7385_ENET 163 #define __SW_BOOT_MASK 0x03 164 #define __SW_BOOT_NOR 0xc8 165 #define __SW_BOOT_SPI 0x28 166 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 167 #define __SW_BOOT_NAND 0xe8 168 #define __SW_BOOT_PCIE 0xa8 169 #define CONFIG_SYS_L2_SIZE (512 << 10) 170 /* 171 * Dynamic MTD Partition support with mtdparts 172 */ 173 #define CONFIG_MTD_DEVICE 174 #define CONFIG_MTD_PARTITIONS 175 #define CONFIG_CMD_MTDPARTS 176 #define CONFIG_FLASH_CFI_MTD 177 #ifdef CONFIG_PHYS_64BIT 178 #define MTDIDS_DEFAULT "nor0=fef000000.nor" 179 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ 180 "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" 181 #else 182 #define MTDIDS_DEFAULT "nor0=ef000000.nor" 183 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ 184 "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" 185 #endif 186 #endif 187 188 #ifdef CONFIG_SDCARD 189 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 190 #define CONFIG_SPL_ENV_SUPPORT 191 #define CONFIG_SPL_SERIAL_SUPPORT 192 #define CONFIG_SPL_MMC_SUPPORT 193 #define CONFIG_SPL_MMC_MINIMAL 194 #define CONFIG_SPL_FLUSH_IMAGE 195 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 196 #define CONFIG_SPL_LIBGENERIC_SUPPORT 197 #define CONFIG_SPL_LIBCOMMON_SUPPORT 198 #define CONFIG_SPL_I2C_SUPPORT 199 #define CONFIG_FSL_LAW /* Use common FSL init code */ 200 #define CONFIG_SYS_TEXT_BASE 0x11001000 201 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 202 #define CONFIG_SPL_PAD_TO 0x20000 203 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 204 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 205 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 206 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 207 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 208 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 209 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 210 #define CONFIG_SPL_MMC_BOOT 211 #ifdef CONFIG_SPL_BUILD 212 #define CONFIG_SPL_COMMON_INIT_DDR 213 #endif 214 #endif 215 216 #ifdef CONFIG_SPIFLASH 217 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 218 #define CONFIG_SPL_ENV_SUPPORT 219 #define CONFIG_SPL_SERIAL_SUPPORT 220 #define CONFIG_SPL_SPI_SUPPORT 221 #define CONFIG_SPL_SPI_FLASH_SUPPORT 222 #define CONFIG_SPL_SPI_FLASH_MINIMAL 223 #define CONFIG_SPL_FLUSH_IMAGE 224 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 225 #define CONFIG_SPL_LIBGENERIC_SUPPORT 226 #define CONFIG_SPL_LIBCOMMON_SUPPORT 227 #define CONFIG_SPL_I2C_SUPPORT 228 #define CONFIG_FSL_LAW /* Use common FSL init code */ 229 #define CONFIG_SYS_TEXT_BASE 0x11001000 230 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 231 #define CONFIG_SPL_PAD_TO 0x20000 232 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 233 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 234 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 235 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 236 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 237 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 238 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 239 #define CONFIG_SPL_SPI_BOOT 240 #ifdef CONFIG_SPL_BUILD 241 #define CONFIG_SPL_COMMON_INIT_DDR 242 #endif 243 #endif 244 245 #ifdef CONFIG_NAND 246 #ifdef CONFIG_TPL_BUILD 247 #define CONFIG_SPL_NAND_BOOT 248 #define CONFIG_SPL_FLUSH_IMAGE 249 #define CONFIG_SPL_ENV_SUPPORT 250 #define CONFIG_SPL_NAND_INIT 251 #define CONFIG_SPL_SERIAL_SUPPORT 252 #define CONFIG_SPL_LIBGENERIC_SUPPORT 253 #define CONFIG_SPL_LIBCOMMON_SUPPORT 254 #define CONFIG_SPL_I2C_SUPPORT 255 #define CONFIG_SPL_NAND_SUPPORT 256 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 257 #define CONFIG_SPL_COMMON_INIT_DDR 258 #define CONFIG_SPL_MAX_SIZE (128 << 10) 259 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 260 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 261 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 262 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 263 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 264 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 265 #elif defined(CONFIG_SPL_BUILD) 266 #define CONFIG_SPL_INIT_MINIMAL 267 #define CONFIG_SPL_SERIAL_SUPPORT 268 #define CONFIG_SPL_NAND_SUPPORT 269 #define CONFIG_SPL_FLUSH_IMAGE 270 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 271 #define CONFIG_SPL_TEXT_BASE 0xff800000 272 #define CONFIG_SPL_MAX_SIZE 4096 273 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 274 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 275 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 276 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 277 #endif /* not CONFIG_TPL_BUILD */ 278 279 #define CONFIG_SPL_PAD_TO 0x20000 280 #define CONFIG_TPL_PAD_TO 0x20000 281 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 282 #define CONFIG_SYS_TEXT_BASE 0x11001000 283 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 284 #endif 285 286 #ifndef CONFIG_SYS_TEXT_BASE 287 #define CONFIG_SYS_TEXT_BASE 0xeff40000 288 #endif 289 290 #ifndef CONFIG_RESET_VECTOR_ADDRESS 291 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 292 #endif 293 294 #ifndef CONFIG_SYS_MONITOR_BASE 295 #ifdef CONFIG_SPL_BUILD 296 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 297 #else 298 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 299 #endif 300 #endif 301 302 /* High Level Configuration Options */ 303 #define CONFIG_BOOKE 304 #define CONFIG_E500 305 306 #define CONFIG_MP 307 308 #define CONFIG_FSL_ELBC 309 #define CONFIG_PCI 310 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 311 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 312 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 313 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 314 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 315 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 316 317 #define CONFIG_FSL_LAW 318 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 319 #define CONFIG_ENV_OVERWRITE 320 321 #define CONFIG_CMD_SATA 322 #define CONFIG_SATA_SIL 323 #define CONFIG_SYS_SATA_MAX_DEVICE 2 324 #define CONFIG_LIBATA 325 #define CONFIG_LBA48 326 327 #if defined(CONFIG_P2020RDB) 328 #define CONFIG_SYS_CLK_FREQ 100000000 329 #else 330 #define CONFIG_SYS_CLK_FREQ 66666666 331 #endif 332 #define CONFIG_DDR_CLK_FREQ 66666666 333 334 #define CONFIG_HWCONFIG 335 /* 336 * These can be toggled for performance analysis, otherwise use default. 337 */ 338 #define CONFIG_L2_CACHE 339 #define CONFIG_BTB 340 341 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 342 343 #define CONFIG_ENABLE_36BIT_PHYS 344 345 #ifdef CONFIG_PHYS_64BIT 346 #define CONFIG_ADDR_MAP 1 347 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 348 #endif 349 350 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 351 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 352 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 353 354 #define CONFIG_SYS_CCSRBAR 0xffe00000 355 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 356 357 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 358 SPL code*/ 359 #ifdef CONFIG_SPL_BUILD 360 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 361 #endif 362 363 /* DDR Setup */ 364 #define CONFIG_SYS_FSL_DDR3 365 #define CONFIG_SYS_DDR_RAW_TIMING 366 #define CONFIG_DDR_SPD 367 #define CONFIG_SYS_SPD_BUS_NUM 1 368 #define SPD_EEPROM_ADDRESS 0x52 369 #undef CONFIG_FSL_DDR_INTERACTIVE 370 371 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) 372 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 373 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 374 #else 375 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 376 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 377 #endif 378 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 379 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 380 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 381 382 #define CONFIG_NUM_DDR_CONTROLLERS 1 383 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 384 385 /* Default settings for DDR3 */ 386 #ifndef CONFIG_P2020RDB 387 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 388 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 389 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 390 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 391 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 392 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 393 394 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 395 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 396 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 397 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 398 399 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 400 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 401 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 402 #define CONFIG_SYS_DDR_RCW_1 0x00000000 403 #define CONFIG_SYS_DDR_RCW_2 0x00000000 404 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 405 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 406 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 407 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 408 409 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 410 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 411 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 412 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 413 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 414 #define CONFIG_SYS_DDR_MODE_1 0x40461520 415 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 416 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 417 #endif 418 419 #undef CONFIG_CLOCKS_IN_MHZ 420 421 /* 422 * Memory map 423 * 424 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 425 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 426 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 427 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable 428 * (early boot only) 429 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 430 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 431 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 432 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 433 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 434 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 435 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 436 */ 437 438 439 /* 440 * Local Bus Definitions 441 */ 442 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) 443 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 444 #define CONFIG_SYS_FLASH_BASE 0xec000000 445 #elif defined(CONFIG_P1020UTM) 446 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 447 #define CONFIG_SYS_FLASH_BASE 0xee000000 448 #else 449 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 450 #define CONFIG_SYS_FLASH_BASE 0xef000000 451 #endif 452 453 454 #ifdef CONFIG_PHYS_64BIT 455 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 456 #else 457 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 458 #endif 459 460 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 461 | BR_PS_16 | BR_V) 462 463 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 464 465 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 466 #define CONFIG_SYS_FLASH_QUIET_TEST 467 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 468 469 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 470 471 #undef CONFIG_SYS_FLASH_CHECKSUM 472 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 473 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 474 475 #define CONFIG_FLASH_CFI_DRIVER 476 #define CONFIG_SYS_FLASH_CFI 477 #define CONFIG_SYS_FLASH_EMPTY_INFO 478 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 479 480 /* Nand Flash */ 481 #ifdef CONFIG_NAND_FSL_ELBC 482 #define CONFIG_SYS_NAND_BASE 0xff800000 483 #ifdef CONFIG_PHYS_64BIT 484 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 485 #else 486 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 487 #endif 488 489 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 490 #define CONFIG_SYS_MAX_NAND_DEVICE 1 491 #define CONFIG_CMD_NAND 492 #if defined(CONFIG_P1020RDB_PD) 493 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 494 #else 495 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 496 #endif 497 498 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 499 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 500 | BR_PS_8 /* Port Size = 8 bit */ \ 501 | BR_MS_FCM /* MSEL = FCM */ \ 502 | BR_V) /* valid */ 503 #if defined(CONFIG_P1020RDB_PD) 504 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ 505 | OR_FCM_PGS /* Large Page*/ \ 506 | OR_FCM_CSCT \ 507 | OR_FCM_CST \ 508 | OR_FCM_CHT \ 509 | OR_FCM_SCY_1 \ 510 | OR_FCM_TRLX \ 511 | OR_FCM_EHTR) 512 #else 513 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 514 | OR_FCM_CSCT \ 515 | OR_FCM_CST \ 516 | OR_FCM_CHT \ 517 | OR_FCM_SCY_1 \ 518 | OR_FCM_TRLX \ 519 | OR_FCM_EHTR) 520 #endif 521 #endif /* CONFIG_NAND_FSL_ELBC */ 522 523 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 524 525 #define CONFIG_SYS_INIT_RAM_LOCK 526 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 527 #ifdef CONFIG_PHYS_64BIT 528 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 529 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 530 /* The assembler doesn't like typecast */ 531 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 532 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 533 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 534 #else 535 /* Initial L1 address */ 536 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 537 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 538 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 539 #endif 540 /* Size of used area in RAM */ 541 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 542 543 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 544 GENERATED_GBL_DATA_SIZE) 545 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 546 547 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 548 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 549 550 #define CONFIG_SYS_CPLD_BASE 0xffa00000 551 #ifdef CONFIG_PHYS_64BIT 552 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 553 #else 554 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 555 #endif 556 /* CPLD config size: 1Mb */ 557 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 558 BR_PS_8 | BR_V) 559 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 560 561 #define CONFIG_SYS_PMC_BASE 0xff980000 562 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 563 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 564 BR_PS_8 | BR_V) 565 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 566 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 567 OR_GPCM_EAD) 568 569 #ifdef CONFIG_NAND 570 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 571 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 572 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 573 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 574 #else 575 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 576 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 577 #ifdef CONFIG_NAND_FSL_ELBC 578 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 579 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 580 #endif 581 #endif 582 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 583 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 584 585 586 /* Vsc7385 switch */ 587 #ifdef CONFIG_VSC7385_ENET 588 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 589 590 #ifdef CONFIG_PHYS_64BIT 591 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 592 #else 593 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 594 #endif 595 596 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 597 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 598 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 599 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 600 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 601 602 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 603 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 604 605 /* The size of the VSC7385 firmware image */ 606 #define CONFIG_VSC7385_IMAGE_SIZE 8192 607 #endif 608 609 /* 610 * Config the L2 Cache as L2 SRAM 611 */ 612 #if defined(CONFIG_SPL_BUILD) 613 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 614 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 615 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 616 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 617 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 618 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 619 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 620 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 621 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 622 #if defined(CONFIG_P2020RDB) 623 #define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) 624 #else 625 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 626 #endif 627 #elif defined(CONFIG_NAND) 628 #ifdef CONFIG_TPL_BUILD 629 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 630 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 631 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 632 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 633 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 634 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 635 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 636 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 637 #else 638 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 639 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 640 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 641 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 642 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 643 #endif /* CONFIG_TPL_BUILD */ 644 #endif 645 #endif 646 647 /* Serial Port - controlled on board with jumper J8 648 * open - index 2 649 * shorted - index 1 650 */ 651 #define CONFIG_CONS_INDEX 1 652 #undef CONFIG_SERIAL_SOFTWARE_FIFO 653 #define CONFIG_SYS_NS16550 654 #define CONFIG_SYS_NS16550_SERIAL 655 #define CONFIG_SYS_NS16550_REG_SIZE 1 656 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 657 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 658 #define CONFIG_NS16550_MIN_FUNCTIONS 659 #endif 660 661 #define CONFIG_SYS_BAUDRATE_TABLE \ 662 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 663 664 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 665 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 666 667 /* Use the HUSH parser */ 668 #define CONFIG_SYS_HUSH_PARSER 669 670 /* 671 * Pass open firmware flat tree 672 */ 673 #define CONFIG_OF_LIBFDT 674 #define CONFIG_OF_BOARD_SETUP 675 #define CONFIG_OF_STDOUT_VIA_ALIAS 676 677 /* new uImage format support */ 678 #define CONFIG_FIT 679 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 680 681 /* I2C */ 682 #define CONFIG_SYS_I2C 683 #define CONFIG_SYS_I2C_FSL 684 #define CONFIG_SYS_FSL_I2C_SPEED 400000 685 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 686 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 687 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 688 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 689 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 690 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 691 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 692 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 693 694 /* 695 * I2C2 EEPROM 696 */ 697 #undef CONFIG_ID_EEPROM 698 699 #define CONFIG_RTC_PT7C4338 700 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 701 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 702 703 /* enable read and write access to EEPROM */ 704 #define CONFIG_CMD_EEPROM 705 #define CONFIG_SYS_I2C_MULTI_EEPROMS 706 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 707 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 708 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 709 710 /* 711 * eSPI - Enhanced SPI 712 */ 713 #define CONFIG_HARD_SPI 714 #define CONFIG_FSL_ESPI 715 716 #if defined(CONFIG_SPI_FLASH) 717 #define CONFIG_SPI_FLASH_SPANSION 718 #define CONFIG_CMD_SF 719 #define CONFIG_SF_DEFAULT_SPEED 10000000 720 #define CONFIG_SF_DEFAULT_MODE 0 721 #endif 722 723 #if defined(CONFIG_PCI) 724 /* 725 * General PCI 726 * Memory space is mapped 1-1, but I/O space must start from 0. 727 */ 728 729 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 730 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 731 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 732 #ifdef CONFIG_PHYS_64BIT 733 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 734 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 735 #else 736 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 737 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 738 #endif 739 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 740 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 741 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 742 #ifdef CONFIG_PHYS_64BIT 743 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 744 #else 745 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 746 #endif 747 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 748 749 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 750 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 751 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 752 #ifdef CONFIG_PHYS_64BIT 753 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 754 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 755 #else 756 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 757 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 758 #endif 759 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 760 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 761 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 762 #ifdef CONFIG_PHYS_64BIT 763 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 764 #else 765 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 766 #endif 767 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 768 769 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 770 #define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/ 771 #define CONFIG_CMD_PCI 772 773 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 774 #define CONFIG_DOS_PARTITION 775 #endif /* CONFIG_PCI */ 776 777 #if defined(CONFIG_TSEC_ENET) 778 #define CONFIG_MII /* MII PHY management */ 779 #define CONFIG_TSEC1 780 #define CONFIG_TSEC1_NAME "eTSEC1" 781 #define CONFIG_TSEC2 782 #define CONFIG_TSEC2_NAME "eTSEC2" 783 #define CONFIG_TSEC3 784 #define CONFIG_TSEC3_NAME "eTSEC3" 785 786 #define TSEC1_PHY_ADDR 2 787 #define TSEC2_PHY_ADDR 0 788 #define TSEC3_PHY_ADDR 1 789 790 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 791 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 792 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 793 794 #define TSEC1_PHYIDX 0 795 #define TSEC2_PHYIDX 0 796 #define TSEC3_PHYIDX 0 797 798 #define CONFIG_ETHPRIME "eTSEC1" 799 800 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 801 802 #define CONFIG_HAS_ETH0 803 #define CONFIG_HAS_ETH1 804 #define CONFIG_HAS_ETH2 805 #endif /* CONFIG_TSEC_ENET */ 806 807 #ifdef CONFIG_QE 808 /* QE microcode/firmware address */ 809 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 810 #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 811 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 812 #endif /* CONFIG_QE */ 813 814 #ifdef CONFIG_P1025RDB 815 /* 816 * QE UEC ethernet configuration 817 */ 818 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 819 820 #undef CONFIG_UEC_ETH 821 #define CONFIG_PHY_MODE_NEED_CHANGE 822 823 #define CONFIG_UEC_ETH1 /* ETH1 */ 824 #define CONFIG_HAS_ETH0 825 826 #ifdef CONFIG_UEC_ETH1 827 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 828 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 829 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 830 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 831 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 832 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 833 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 834 #endif /* CONFIG_UEC_ETH1 */ 835 836 #define CONFIG_UEC_ETH5 /* ETH5 */ 837 #define CONFIG_HAS_ETH1 838 839 #ifdef CONFIG_UEC_ETH5 840 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 841 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 842 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 843 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 844 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 845 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 846 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 847 #endif /* CONFIG_UEC_ETH5 */ 848 #endif /* CONFIG_P1025RDB */ 849 850 /* 851 * Environment 852 */ 853 #ifdef CONFIG_SPIFLASH 854 #define CONFIG_ENV_IS_IN_SPI_FLASH 855 #define CONFIG_ENV_SPI_BUS 0 856 #define CONFIG_ENV_SPI_CS 0 857 #define CONFIG_ENV_SPI_MAX_HZ 10000000 858 #define CONFIG_ENV_SPI_MODE 0 859 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 860 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 861 #define CONFIG_ENV_SECT_SIZE 0x10000 862 #elif defined(CONFIG_SDCARD) 863 #define CONFIG_ENV_IS_IN_MMC 864 #define CONFIG_FSL_FIXED_MMC_LOCATION 865 #define CONFIG_ENV_SIZE 0x2000 866 #define CONFIG_SYS_MMC_ENV_DEV 0 867 #elif defined(CONFIG_NAND) 868 #ifdef CONFIG_TPL_BUILD 869 #define CONFIG_ENV_SIZE 0x2000 870 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 871 #else 872 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 873 #endif 874 #define CONFIG_ENV_IS_IN_NAND 875 #define CONFIG_ENV_OFFSET (1024 * 1024) 876 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 877 #elif defined(CONFIG_SYS_RAMBOOT) 878 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 879 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 880 #define CONFIG_ENV_SIZE 0x2000 881 #else 882 #define CONFIG_ENV_IS_IN_FLASH 883 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 884 #define CONFIG_ENV_SIZE 0x2000 885 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 886 #endif 887 888 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 889 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 890 891 /* 892 * Command line configuration. 893 */ 894 #define CONFIG_CMD_IRQ 895 #define CONFIG_CMD_PING 896 #define CONFIG_CMD_I2C 897 #define CONFIG_CMD_MII 898 #define CONFIG_CMD_DATE 899 #define CONFIG_CMD_ELF 900 #define CONFIG_CMD_REGINFO 901 902 /* 903 * USB 904 */ 905 #define CONFIG_HAS_FSL_DR_USB 906 907 #if defined(CONFIG_HAS_FSL_DR_USB) 908 #define CONFIG_USB_EHCI 909 910 #ifdef CONFIG_USB_EHCI 911 #define CONFIG_CMD_USB 912 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 913 #define CONFIG_USB_EHCI_FSL 914 #define CONFIG_USB_STORAGE 915 #endif 916 #endif 917 918 #if defined(CONFIG_P1020RDB_PD) 919 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 920 #endif 921 922 #define CONFIG_MMC 923 924 #ifdef CONFIG_MMC 925 #define CONFIG_FSL_ESDHC 926 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 927 #define CONFIG_CMD_MMC 928 #define CONFIG_GENERIC_MMC 929 #endif 930 931 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ 932 || defined(CONFIG_FSL_SATA) 933 #define CONFIG_CMD_EXT2 934 #define CONFIG_CMD_FAT 935 #define CONFIG_DOS_PARTITION 936 #endif 937 938 #undef CONFIG_WATCHDOG /* watchdog disabled */ 939 940 /* 941 * Miscellaneous configurable options 942 */ 943 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 944 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 945 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 946 #if defined(CONFIG_CMD_KGDB) 947 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 948 #else 949 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 950 #endif 951 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 952 /* Print Buffer Size */ 953 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 954 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 955 956 /* 957 * For booting Linux, the board info and command line data 958 * have to be in the first 64 MB of memory, since this is 959 * the maximum mapped by the Linux kernel during initialization. 960 */ 961 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 962 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 963 964 #if defined(CONFIG_CMD_KGDB) 965 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 966 #endif 967 968 /* 969 * Environment Configuration 970 */ 971 #define CONFIG_HOSTNAME unknown 972 #define CONFIG_ROOTPATH "/opt/nfsroot" 973 #define CONFIG_BOOTFILE "uImage" 974 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 975 976 /* default location for tftp and bootm */ 977 #define CONFIG_LOADADDR 1000000 978 979 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 980 #define CONFIG_BOOTARGS /* the boot command will set bootargs */ 981 982 #define CONFIG_BAUDRATE 115200 983 984 #ifdef __SW_BOOT_NOR 985 #define __NOR_RST_CMD \ 986 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 987 i2c mw 18 3 __SW_BOOT_MASK 1; reset 988 #endif 989 #ifdef __SW_BOOT_SPI 990 #define __SPI_RST_CMD \ 991 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 992 i2c mw 18 3 __SW_BOOT_MASK 1; reset 993 #endif 994 #ifdef __SW_BOOT_SD 995 #define __SD_RST_CMD \ 996 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 997 i2c mw 18 3 __SW_BOOT_MASK 1; reset 998 #endif 999 #ifdef __SW_BOOT_NAND 1000 #define __NAND_RST_CMD \ 1001 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 1002 i2c mw 18 3 __SW_BOOT_MASK 1; reset 1003 #endif 1004 #ifdef __SW_BOOT_PCIE 1005 #define __PCIE_RST_CMD \ 1006 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 1007 i2c mw 18 3 __SW_BOOT_MASK 1; reset 1008 #endif 1009 1010 #define CONFIG_EXTRA_ENV_SETTINGS \ 1011 "netdev=eth0\0" \ 1012 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 1013 "loadaddr=1000000\0" \ 1014 "bootfile=uImage\0" \ 1015 "tftpflash=tftpboot $loadaddr $uboot; " \ 1016 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 1017 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 1018 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 1019 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 1020 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 1021 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 1022 "consoledev=ttyS0\0" \ 1023 "ramdiskaddr=2000000\0" \ 1024 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 1025 "fdtaddr=c00000\0" \ 1026 "bdev=sda1\0" \ 1027 "jffs2nor=mtdblock3\0" \ 1028 "norbootaddr=ef080000\0" \ 1029 "norfdtaddr=ef040000\0" \ 1030 "jffs2nand=mtdblock9\0" \ 1031 "nandbootaddr=100000\0" \ 1032 "nandfdtaddr=80000\0" \ 1033 "ramdisk_size=120000\0" \ 1034 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 1035 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 1036 __stringify(__NOR_RST_CMD)"\0" \ 1037 __stringify(__SPI_RST_CMD)"\0" \ 1038 __stringify(__SD_RST_CMD)"\0" \ 1039 __stringify(__NAND_RST_CMD)"\0" \ 1040 __stringify(__PCIE_RST_CMD)"\0" 1041 1042 #define CONFIG_NFSBOOTCOMMAND \ 1043 "setenv bootargs root=/dev/nfs rw " \ 1044 "nfsroot=$serverip:$rootpath " \ 1045 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 1046 "console=$consoledev,$baudrate $othbootargs;" \ 1047 "tftp $loadaddr $bootfile;" \ 1048 "tftp $fdtaddr $fdtfile;" \ 1049 "bootm $loadaddr - $fdtaddr" 1050 1051 #define CONFIG_HDBOOT \ 1052 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 1053 "console=$consoledev,$baudrate $othbootargs;" \ 1054 "usb start;" \ 1055 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 1056 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 1057 "bootm $loadaddr - $fdtaddr" 1058 1059 #define CONFIG_USB_FAT_BOOT \ 1060 "setenv bootargs root=/dev/ram rw " \ 1061 "console=$consoledev,$baudrate $othbootargs " \ 1062 "ramdisk_size=$ramdisk_size;" \ 1063 "usb start;" \ 1064 "fatload usb 0:2 $loadaddr $bootfile;" \ 1065 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 1066 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 1067 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1068 1069 #define CONFIG_USB_EXT2_BOOT \ 1070 "setenv bootargs root=/dev/ram rw " \ 1071 "console=$consoledev,$baudrate $othbootargs " \ 1072 "ramdisk_size=$ramdisk_size;" \ 1073 "usb start;" \ 1074 "ext2load usb 0:4 $loadaddr $bootfile;" \ 1075 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 1076 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 1077 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1078 1079 #define CONFIG_NORBOOT \ 1080 "setenv bootargs root=/dev/$jffs2nor rw " \ 1081 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 1082 "bootm $norbootaddr - $norfdtaddr" 1083 1084 #define CONFIG_RAMBOOTCOMMAND \ 1085 "setenv bootargs root=/dev/ram rw " \ 1086 "console=$consoledev,$baudrate $othbootargs " \ 1087 "ramdisk_size=$ramdisk_size;" \ 1088 "tftp $ramdiskaddr $ramdiskfile;" \ 1089 "tftp $loadaddr $bootfile;" \ 1090 "tftp $fdtaddr $fdtfile;" \ 1091 "bootm $loadaddr $ramdiskaddr $fdtaddr" 1092 1093 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 1094 1095 #endif /* __CONFIG_H */ 1096