1 /*
2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * See file CREDITS for list of people who contributed to this
5  * project.
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22 
23 /*
24  * QorIQ RDB boards configuration file
25  */
26 #ifndef __CONFIG_H
27 #define __CONFIG_H
28 
29 #ifdef CONFIG_36BIT
30 #define CONFIG_PHYS_64BIT
31 #endif
32 
33 #if defined(CONFIG_P1020MBG)
34 #define CONFIG_BOARDNAME "P1020MBG-PC"
35 #define CONFIG_P1020
36 #define CONFIG_VSC7385_ENET
37 #define CONFIG_SLIC
38 #define __SW_BOOT_MASK		0x03
39 #define __SW_BOOT_NOR		0xe4
40 #define __SW_BOOT_SD		0x54
41 #endif
42 
43 #if defined(CONFIG_P1020UTM)
44 #define CONFIG_BOARDNAME "P1020UTM-PC"
45 #define CONFIG_P1020
46 #define __SW_BOOT_MASK		0x03
47 #define __SW_BOOT_NOR		0xe0
48 #define __SW_BOOT_SD		0x50
49 #endif
50 
51 #if defined(CONFIG_P1020RDB)
52 #define CONFIG_BOARDNAME "P1020RDB-PC"
53 #define CONFIG_NAND_FSL_ELBC
54 #define CONFIG_P1020
55 #define CONFIG_SPI_FLASH
56 #define CONFIG_VSC7385_ENET
57 #define CONFIG_SLIC
58 #define __SW_BOOT_MASK		0x03
59 #define __SW_BOOT_NOR		0x5c
60 #define __SW_BOOT_SPI		0x1c
61 #define __SW_BOOT_SD		0x9c
62 #define __SW_BOOT_NAND		0xec
63 #define __SW_BOOT_PCIE		0x6c
64 #endif
65 
66 #if defined(CONFIG_P1021RDB)
67 #define CONFIG_BOARDNAME "P1021RDB-PC"
68 #define CONFIG_NAND_FSL_ELBC
69 #define CONFIG_P1021
70 #define CONFIG_QE
71 #define CONFIG_SPI_FLASH
72 #define CONFIG_VSC7385_ENET
73 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
74 						addresses in the LBC */
75 #define __SW_BOOT_MASK		0x03
76 #define __SW_BOOT_NOR		0x5c
77 #define __SW_BOOT_SPI		0x1c
78 #define __SW_BOOT_SD		0x9c
79 #define __SW_BOOT_NAND		0xec
80 #define __SW_BOOT_PCIE		0x6c
81 #endif
82 
83 #if defined(CONFIG_P1024RDB)
84 #define CONFIG_BOARDNAME "P1024RDB"
85 #define CONFIG_NAND_FSL_ELBC
86 #define CONFIG_P1024
87 #define CONFIG_SLIC
88 #define CONFIG_SPI_FLASH
89 #define __SW_BOOT_MASK		0xf3
90 #define __SW_BOOT_NOR		0x00
91 #define __SW_BOOT_SPI		0x08
92 #define __SW_BOOT_SD		0x04
93 #define __SW_BOOT_NAND		0x0c
94 #endif
95 
96 #if defined(CONFIG_P1025RDB)
97 #define CONFIG_BOARDNAME "P1025RDB"
98 #define CONFIG_NAND_FSL_ELBC
99 #define CONFIG_P1025
100 #define CONFIG_QE
101 #define CONFIG_SLIC
102 #define CONFIG_SPI_FLASH
103 
104 #define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
105 						addresses in the LBC */
106 #define __SW_BOOT_MASK		0xf3
107 #define __SW_BOOT_NOR		0x00
108 #define __SW_BOOT_SPI		0x08
109 #define __SW_BOOT_SD		0x04
110 #define __SW_BOOT_NAND		0x0c
111 #endif
112 
113 #if defined(CONFIG_P2020RDB)
114 #define CONFIG_BOARDNAME "P2020RDB-PCA"
115 #define CONFIG_NAND_FSL_ELBC
116 #define CONFIG_P2020
117 #define CONFIG_SPI_FLASH
118 #define CONFIG_VSC7385_ENET
119 #define __SW_BOOT_MASK		0x03
120 #define __SW_BOOT_NOR		0xc8
121 #define __SW_BOOT_SPI		0x28
122 #define __SW_BOOT_SD		0x68 /* or 0x18 */
123 #define __SW_BOOT_NAND		0xe8
124 #define __SW_BOOT_PCIE		0xa8
125 #endif
126 
127 #ifdef CONFIG_SDCARD
128 #define CONFIG_RAMBOOT_SDCARD
129 #define CONFIG_SYS_RAMBOOT
130 #define CONFIG_SYS_EXTRA_ENV_RELOC
131 #define CONFIG_SYS_TEXT_BASE		0x11000000
132 #define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
133 #endif
134 
135 #ifdef CONFIG_SPIFLASH
136 #define CONFIG_RAMBOOT_SPIFLASH
137 #define CONFIG_SYS_RAMBOOT
138 #define CONFIG_SYS_EXTRA_ENV_RELOC
139 #define CONFIG_SYS_TEXT_BASE		0x11000000
140 #define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
141 #endif
142 
143 #if defined(CONFIG_NAND) && defined(CONFIG_NAND_FSL_ELBC)
144 #define CONFIG_NAND_U_BOOT
145 #define CONFIG_SYS_EXTRA_ENV_RELOC
146 #define CONFIG_SYS_RAMBOOT
147 #define CONFIG_SYS_TEXT_BASE_SPL	0xff800000
148 #ifdef CONFIG_NAND_SPL
149 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE_SPL
150 #else
151 #define CONFIG_SYS_TEXT_BASE		0x11001000
152 #endif /* CONFIG_NAND_SPL */
153 #endif
154 
155 #ifndef CONFIG_SYS_TEXT_BASE
156 #define CONFIG_SYS_TEXT_BASE		0xeff80000
157 #endif
158 
159 #ifndef CONFIG_RESET_VECTOR_ADDRESS
160 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
161 #endif
162 
163 #ifndef CONFIG_SYS_MONITOR_BASE
164 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
165 #endif
166 
167 /* High Level Configuration Options */
168 #define CONFIG_BOOKE
169 #define CONFIG_E500
170 #define CONFIG_MPC85xx
171 
172 #define CONFIG_MP
173 
174 #define CONFIG_FSL_ELBC
175 #define CONFIG_PCI
176 #define CONFIG_PCIE1	/* PCIE controler 1 (slot 1) */
177 #define CONFIG_PCIE2	/* PCIE controler 2 (slot 2) */
178 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
179 #define CONFIG_FSL_PCIE_RESET	/* need PCIe reset errata */
180 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
181 
182 #define CONFIG_FSL_LAW
183 #define CONFIG_TSEC_ENET	/* tsec ethernet support */
184 #define CONFIG_ENV_OVERWRITE
185 
186 #define CONFIG_CMD_SATA
187 #define CONFIG_SATA_SIL
188 #define CONFIG_SYS_SATA_MAX_DEVICE	2
189 #define CONFIG_LIBATA
190 #define CONFIG_LBA48
191 
192 #if defined(CONFIG_P2020RDB)
193 #define CONFIG_SYS_CLK_FREQ	100000000
194 #else
195 #define CONFIG_SYS_CLK_FREQ	66666666
196 #endif
197 #define CONFIG_DDR_CLK_FREQ	66666666
198 
199 #define CONFIG_HWCONFIG
200 /*
201  * These can be toggled for performance analysis, otherwise use default.
202  */
203 #define CONFIG_L2_CACHE
204 #define CONFIG_BTB
205 
206 #define CONFIG_BOARD_EARLY_INIT_F	/* Call board_pre_init */
207 
208 #define CONFIG_ENABLE_36BIT_PHYS
209 
210 #ifdef CONFIG_PHYS_64BIT
211 #define CONFIG_ADDR_MAP			1
212 #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
213 #endif
214 
215 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
216 #define CONFIG_SYS_MEMTEST_END		0x1fffffff
217 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
218 
219 #define CONFIG_SYS_CCSRBAR		0xffe00000
220 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
221 
222 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
223        SPL code*/
224 #if defined(CONFIG_NAND_SPL)
225 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
226 #endif
227 
228 /* DDR Setup */
229 #define CONFIG_FSL_DDR3
230 #define CONFIG_SYS_DDR_RAW_TIMING
231 #define CONFIG_DDR_SPD
232 #define CONFIG_SYS_SPD_BUS_NUM 1
233 #define SPD_EEPROM_ADDRESS 0x52
234 #undef CONFIG_FSL_DDR_INTERACTIVE
235 
236 #ifdef CONFIG_P1020MBG
237 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_2G
238 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
239 #else
240 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_1G
241 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
242 #endif
243 #define CONFIG_SYS_SDRAM_SIZE		(1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
244 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
245 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
246 
247 #define CONFIG_NUM_DDR_CONTROLLERS	1
248 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
249 
250 /* Default settings for DDR3 */
251 #ifdef CONFIG_P2020RDB
252 #define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
253 #define CONFIG_SYS_DDR_CS0_CONFIG	0x80014202
254 #define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
255 #define CONFIG_SYS_DDR_CS1_BNDS		0x00000000
256 #define CONFIG_SYS_DDR_CS1_CONFIG	0x00000000
257 #define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
258 
259 #define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
260 #define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
261 #define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
262 #define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
263 
264 #define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
265 #define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8645F607
266 #define CONFIG_SYS_DDR_SR_CNTR		0x00000000
267 #define CONFIG_SYS_DDR_RCW_1		0x00000000
268 #define CONFIG_SYS_DDR_RCW_2		0x00000000
269 #define CONFIG_SYS_DDR_CONTROL		0xC7000000	/* Type = DDR3	*/
270 #define CONFIG_SYS_DDR_CONTROL_2	0x24401000
271 #define CONFIG_SYS_DDR_TIMING_4		0x00220001
272 #define CONFIG_SYS_DDR_TIMING_5		0x02401400
273 
274 #define CONFIG_SYS_DDR_TIMING_3		0x00020000
275 #define CONFIG_SYS_DDR_TIMING_0		0x00330104
276 #define CONFIG_SYS_DDR_TIMING_1		0x6f6B4644
277 #define CONFIG_SYS_DDR_TIMING_2		0x0FA88CCF
278 #define CONFIG_SYS_DDR_CLK_CTRL		0x02000000
279 #define CONFIG_SYS_DDR_MODE_1		0x00421422
280 #define CONFIG_SYS_DDR_MODE_2		0x04000000
281 #define CONFIG_SYS_DDR_INTERVAL		0x0C300100
282 
283 #else
284 #define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
285 #define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
286 #define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
287 #define CONFIG_SYS_DDR_CS1_BNDS		0x0040007f
288 #define CONFIG_SYS_DDR_CS1_CONFIG	0x80014302
289 #define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
290 
291 #define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
292 #define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
293 #define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
294 #define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
295 
296 #define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
297 #define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8655A608
298 #define CONFIG_SYS_DDR_SR_CNTR		0x00000000
299 #define CONFIG_SYS_DDR_RCW_1		0x00000000
300 #define CONFIG_SYS_DDR_RCW_2		0x00000000
301 #define CONFIG_SYS_DDR_CONTROL		0xC70C0000	/* Type = DDR3	*/
302 #define CONFIG_SYS_DDR_CONTROL_2	0x04401050
303 #define CONFIG_SYS_DDR_TIMING_4		0x00220001
304 #define CONFIG_SYS_DDR_TIMING_5		0x03402400
305 
306 #define CONFIG_SYS_DDR_TIMING_3		0x00020000
307 #define CONFIG_SYS_DDR_TIMING_0		0x00330004
308 #define CONFIG_SYS_DDR_TIMING_1		0x6f6B4846
309 #define CONFIG_SYS_DDR_TIMING_2		0x0FA8C8CF
310 #define CONFIG_SYS_DDR_CLK_CTRL		0x03000000
311 #define CONFIG_SYS_DDR_MODE_1		0x40461520
312 #define CONFIG_SYS_DDR_MODE_2		0x8000c000
313 #define CONFIG_SYS_DDR_INTERVAL		0x0C300000
314 #endif
315 
316 #undef CONFIG_CLOCKS_IN_MHZ
317 
318 /*
319  * Memory map
320  *
321  * 0x0000_0000 0x7fff_ffff	DDR	Up to 2GB cacheable
322  * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1.5G non-cacheable(PCIe * 3)
323  * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
324  *
325  * Localbus cacheable (TBD)
326  * 0xXXXX_XXXX 0xXXXX_XXXX	SRAM	YZ M Cacheable
327  *
328  * Localbus non-cacheable
329  * 0xec00_0000 0xefff_ffff	FLASH	Up to 64M non-cacheable
330  * 0xff80_0000 0xff8f_ffff	NAND flash	1M non-cacheable
331  * 0xff90_0000 0xff97_ffff	L2 SDRAM(REV.)  512K cacheable(optional)
332  * 0xffa0_0000 0xffaf_ffff	CPLD	1M non-cacheable
333  * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable
334  * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K Cacheable TLB0
335  * 0xffe0_0000 0xffef_ffff	CCSR	1M non-cacheable
336  */
337 
338 
339 /*
340  * Local Bus Definitions
341  */
342 #if defined(CONFIG_P1020MBG)
343 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
344 #define CONFIG_SYS_FLASH_BASE		0xec000000
345 #elif defined(CONFIG_P1020UTM)
346 #define CONFIG_SYS_MAX_FLASH_SECT	256	/* 32M */
347 #define CONFIG_SYS_FLASH_BASE		0xee000000
348 #else
349 #define CONFIG_SYS_MAX_FLASH_SECT	128	/* 16M */
350 #define CONFIG_SYS_FLASH_BASE		0xef000000
351 #endif
352 
353 
354 #ifdef CONFIG_PHYS_64BIT
355 #define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
356 #else
357 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
358 #endif
359 
360 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
361 	| BR_PS_16 | BR_V)
362 
363 #define CONFIG_FLASH_OR_PRELIM	0xfc000ff7
364 
365 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
366 #define CONFIG_SYS_FLASH_QUIET_TEST
367 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
368 
369 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
370 
371 #undef CONFIG_SYS_FLASH_CHECKSUM
372 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
373 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
374 
375 #define CONFIG_FLASH_CFI_DRIVER
376 #define CONFIG_SYS_FLASH_CFI
377 #define CONFIG_SYS_FLASH_EMPTY_INFO
378 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
379 
380 /* Nand Flash */
381 #ifdef CONFIG_NAND_FSL_ELBC
382 #define CONFIG_SYS_NAND_BASE		0xff800000
383 #ifdef CONFIG_PHYS_64BIT
384 #define CONFIG_SYS_NAND_BASE_PHYS	0xfff800000ull
385 #else
386 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
387 #endif
388 
389 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
390 #define CONFIG_SYS_MAX_NAND_DEVICE	1
391 #define CONFIG_MTD_NAND_VERIFY_WRITE
392 #define CONFIG_CMD_NAND
393 #define CONFIG_SYS_NAND_BLOCK_SIZE	(16 * 1024)
394 
395 /* NAND boot: 4K NAND loader config */
396 #define CONFIG_SYS_NAND_SPL_SIZE	0x1000
397 #define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) + CONFIG_SYS_NAND_SPL_SIZE)
398 #define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000 - CONFIG_SYS_NAND_SPL_SIZE)
399 #define CONFIG_SYS_NAND_U_BOOT_START	0x11000000
400 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(0)
401 #define CONFIG_SYS_NAND_U_BOOT_RELOC	0x00010000
402 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
403 
404 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
405 	| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
406 	| BR_PS_8	/* Port Size = 8 bit */ \
407 	| BR_MS_FCM	/* MSEL = FCM */ \
408 	| BR_V)	/* valid */
409 #define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_32KB	/* small page */ \
410 	| OR_FCM_CSCT \
411 	| OR_FCM_CST \
412 	| OR_FCM_CHT \
413 	| OR_FCM_SCY_1 \
414 	| OR_FCM_TRLX \
415 	| OR_FCM_EHTR)
416 #endif /* CONFIG_NAND_FSL_ELBC */
417 
418 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
419 
420 #define CONFIG_SYS_INIT_RAM_LOCK
421 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* stack in RAM */
422 #ifdef CONFIG_PHYS_64BIT
423 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
424 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
425 /* The assembler doesn't like typecast */
426 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
427 	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
428 	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
429 #else
430 /* Initial L1 address */
431 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR
432 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
433 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
434 #endif
435 /* Size of used area in RAM */
436 #define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
437 
438 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
439 					GENERATED_GBL_DATA_SIZE)
440 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
441 
442 #define CONFIG_SYS_MONITOR_LEN	(256 * 1024)/* Reserve 256 kB for Mon */
443 #define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)/* Reserved for malloc */
444 
445 #define CONFIG_SYS_CPLD_BASE	0xffa00000
446 #ifdef CONFIG_PHYS_64BIT
447 #define CONFIG_SYS_CPLD_BASE_PHYS	0xfffa00000ull
448 #else
449 #define CONFIG_SYS_CPLD_BASE_PHYS	CONFIG_SYS_CPLD_BASE
450 #endif
451 /* CPLD config size: 1Mb */
452 #define CONFIG_CPLD_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
453 					BR_PS_8 | BR_V)
454 #define CONFIG_CPLD_OR_PRELIM	(0xfff009f7)
455 
456 #define CONFIG_SYS_PMC_BASE	0xff980000
457 #define CONFIG_SYS_PMC_BASE_PHYS	CONFIG_SYS_PMC_BASE
458 #define CONFIG_PMC_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
459 					BR_PS_8 | BR_V)
460 #define CONFIG_PMC_OR_PRELIM	(OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
461 				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
462 				 OR_GPCM_EAD)
463 
464 #ifdef CONFIG_NAND_U_BOOT
465 #define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
466 #define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
467 #define CONFIG_SYS_BR1_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
468 #define CONFIG_SYS_OR1_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
469 #else
470 #define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
471 #define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
472 #ifdef CONFIG_NAND_FSL_ELBC
473 #define CONFIG_SYS_BR1_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
474 #define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
475 #endif
476 #endif
477 #define CONFIG_SYS_BR3_PRELIM	CONFIG_CPLD_BR_PRELIM	/* CPLD Base Address */
478 #define CONFIG_SYS_OR3_PRELIM	CONFIG_CPLD_OR_PRELIM	/* CPLD Options */
479 
480 
481 /* Vsc7385 switch */
482 #ifdef CONFIG_VSC7385_ENET
483 #define CONFIG_SYS_VSC7385_BASE		0xffb00000
484 
485 #ifdef CONFIG_PHYS_64BIT
486 #define CONFIG_SYS_VSC7385_BASE_PHYS	0xfffb00000ull
487 #else
488 #define CONFIG_SYS_VSC7385_BASE_PHYS	CONFIG_SYS_VSC7385_BASE
489 #endif
490 
491 #define CONFIG_SYS_VSC7385_BR_PRELIM	\
492 	(BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
493 #define CONFIG_SYS_VSC7385_OR_PRELIM	(OR_AM_128KB | OR_GPCM_CSNT | \
494 			OR_GPCM_XACS |  OR_GPCM_SCY_15 | OR_GPCM_SETA | \
495 			OR_GPCM_TRLX |  OR_GPCM_EHTR | OR_GPCM_EAD)
496 
497 #define CONFIG_SYS_BR2_PRELIM	CONFIG_SYS_VSC7385_BR_PRELIM
498 #define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_VSC7385_OR_PRELIM
499 
500 /* The size of the VSC7385 firmware image */
501 #define CONFIG_VSC7385_IMAGE_SIZE	8192
502 #endif
503 
504 /* Serial Port - controlled on board with jumper J8
505  * open - index 2
506  * shorted - index 1
507  */
508 #define CONFIG_CONS_INDEX		1
509 #undef CONFIG_SERIAL_SOFTWARE_FIFO
510 #define CONFIG_SYS_NS16550
511 #define CONFIG_SYS_NS16550_SERIAL
512 #define CONFIG_SYS_NS16550_REG_SIZE	1
513 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
514 #ifdef CONFIG_NAND_SPL
515 #define CONFIG_NS16550_MIN_FUNCTIONS
516 #endif
517 
518 #define CONFIG_SYS_BAUDRATE_TABLE	\
519 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
520 
521 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
522 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
523 
524 /* Use the HUSH parser */
525 #define CONFIG_SYS_HUSH_PARSER
526 
527 /*
528  * Pass open firmware flat tree
529  */
530 #define CONFIG_OF_LIBFDT
531 #define CONFIG_OF_BOARD_SETUP
532 #define CONFIG_OF_STDOUT_VIA_ALIAS
533 
534 /* new uImage format support */
535 #define CONFIG_FIT
536 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
537 
538 /* I2C */
539 #define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
540 #define CONFIG_HARD_I2C			/* I2C with hardware support */
541 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
542 #define CONFIG_I2C_MULTI_BUS
543 #define CONFIG_I2C_CMD_TREE
544 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C spd and slave address */
545 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
546 #define CONFIG_SYS_I2C_SLAVE		0x7F
547 #define CONFIG_SYS_I2C_NOPROBES		{{0, 0x29}} /* Don't probe this addr */
548 #define CONFIG_SYS_I2C_OFFSET		0x3000
549 #define CONFIG_SYS_I2C2_OFFSET		0x3100
550 #define CONFIG_SYS_SPD_BUS_NUM		1 /* For rom_loc and flash bank */
551 
552 /*
553  * I2C2 EEPROM
554  */
555 #undef CONFIG_ID_EEPROM
556 
557 #define CONFIG_RTC_PT7C4338
558 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
559 #define CONFIG_SYS_I2C_PCA9557_ADDR	0x18
560 
561 /* enable read and write access to EEPROM */
562 #define CONFIG_CMD_EEPROM
563 #define CONFIG_SYS_I2C_MULTI_EEPROMS
564 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
565 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
566 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
567 
568 /*
569  * eSPI - Enhanced SPI
570  */
571 #define CONFIG_HARD_SPI
572 #define CONFIG_FSL_ESPI
573 
574 #if defined(CONFIG_SPI_FLASH)
575 #define CONFIG_SPI_FLASH_SPANSION
576 #define CONFIG_CMD_SF
577 #define CONFIG_SF_DEFAULT_SPEED	10000000
578 #define CONFIG_SF_DEFAULT_MODE	0
579 #endif
580 
581 #if defined(CONFIG_PCI)
582 /*
583  * General PCI
584  * Memory space is mapped 1-1, but I/O space must start from 0.
585  */
586 
587 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
588 #define CONFIG_SYS_PCIE2_NAME		"PCIe SLOT"
589 #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
590 #ifdef CONFIG_PHYS_64BIT
591 #define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
592 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
593 #else
594 #define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
595 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
596 #endif
597 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
598 #define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
599 #define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
600 #ifdef CONFIG_PHYS_64BIT
601 #define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
602 #else
603 #define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
604 #endif
605 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
606 
607 /* controller 1, Slot 2, tgtid 1, Base address a000 */
608 #define CONFIG_SYS_PCIE1_NAME		"mini PCIe SLOT"
609 #define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
610 #ifdef CONFIG_PHYS_64BIT
611 #define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
612 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
613 #else
614 #define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
615 #define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
616 #endif
617 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
618 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
619 #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
620 #ifdef CONFIG_PHYS_64BIT
621 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
622 #else
623 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc00000
624 #endif
625 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
626 
627 #define CONFIG_PCI_PNP	/* do pci plug-and-play */
628 #define CONFIG_E1000	/* Defind e1000 pci Ethernet card*/
629 #define CONFIG_CMD_PCI
630 #define CONFIG_CMD_NET
631 
632 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
633 #define CONFIG_DOS_PARTITION
634 #endif /* CONFIG_PCI */
635 
636 #if defined(CONFIG_TSEC_ENET)
637 #define CONFIG_MII		/* MII PHY management */
638 #define CONFIG_TSEC1
639 #define CONFIG_TSEC1_NAME	"eTSEC1"
640 #define CONFIG_TSEC2
641 #define CONFIG_TSEC2_NAME	"eTSEC2"
642 #define CONFIG_TSEC3
643 #define CONFIG_TSEC3_NAME	"eTSEC3"
644 
645 #define TSEC1_PHY_ADDR	2
646 #define TSEC2_PHY_ADDR	0
647 #define TSEC3_PHY_ADDR	1
648 
649 #define TSEC1_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
650 #define TSEC2_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
651 #define TSEC3_FLAGS	(TSEC_GIGABIT | TSEC_REDUCED)
652 
653 #define TSEC1_PHYIDX	0
654 #define TSEC2_PHYIDX	0
655 #define TSEC3_PHYIDX	0
656 
657 #define CONFIG_ETHPRIME	"eTSEC1"
658 
659 #define CONFIG_PHY_GIGE	1	/* Include GbE speed/duplex detection */
660 
661 #define CONFIG_HAS_ETH0
662 #define CONFIG_HAS_ETH1
663 #define CONFIG_HAS_ETH2
664 #endif /* CONFIG_TSEC_ENET */
665 
666 #ifdef CONFIG_QE
667 /* QE microcode/firmware address */
668 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
669 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0xefec0000
670 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
671 #endif /* CONFIG_QE */
672 
673 #ifdef CONFIG_P1025RDB
674 /*
675  * QE UEC ethernet configuration
676  */
677 #define CONFIG_MIIM_ADDRESS	(CONFIG_SYS_CCSRBAR + 0x82120)
678 
679 #undef CONFIG_UEC_ETH
680 #define CONFIG_PHY_MODE_NEED_CHANGE
681 
682 #define CONFIG_UEC_ETH1	/* ETH1 */
683 #define CONFIG_HAS_ETH0
684 
685 #ifdef CONFIG_UEC_ETH1
686 #define CONFIG_SYS_UEC1_UCC_NUM	0	/* UCC1 */
687 #define CONFIG_SYS_UEC1_RX_CLK	QE_CLK12 /* CLK12 for MII */
688 #define CONFIG_SYS_UEC1_TX_CLK	QE_CLK9 /* CLK9 for MII */
689 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
690 #define CONFIG_SYS_UEC1_PHY_ADDR	0x0	/* 0x0 for MII */
691 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
692 #define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
693 #endif /* CONFIG_UEC_ETH1 */
694 
695 #define CONFIG_UEC_ETH5	/* ETH5 */
696 #define CONFIG_HAS_ETH1
697 
698 #ifdef CONFIG_UEC_ETH5
699 #define CONFIG_SYS_UEC5_UCC_NUM	4	/* UCC5 */
700 #define CONFIG_SYS_UEC5_RX_CLK	QE_CLK_NONE
701 #define CONFIG_SYS_UEC5_TX_CLK	QE_CLK13 /* CLK 13 for RMII */
702 #define CONFIG_SYS_UEC5_ETH_TYPE	FAST_ETH
703 #define CONFIG_SYS_UEC5_PHY_ADDR	0x3	/* 0x3 for RMII */
704 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
705 #define CONFIG_SYS_UEC5_INTERFACE_SPEED	100
706 #endif /* CONFIG_UEC_ETH5 */
707 #endif /* CONFIG_P1025RDB */
708 
709 /*
710  * Environment
711  */
712 #ifdef CONFIG_SYS_RAMBOOT
713 #ifdef CONFIG_RAMBOOT_SPIFLASH
714 #define CONFIG_ENV_IS_IN_SPI_FLASH
715 #define CONFIG_ENV_SPI_BUS	0
716 #define CONFIG_ENV_SPI_CS	0
717 #define CONFIG_ENV_SPI_MAX_HZ	10000000
718 #define CONFIG_ENV_SPI_MODE	0
719 #define CONFIG_ENV_SIZE		0x2000	/* 8KB */
720 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
721 #define CONFIG_ENV_SECT_SIZE	0x10000
722 #elif defined(CONFIG_RAMBOOT_SDCARD)
723 #define CONFIG_ENV_IS_IN_MMC
724 #define CONFIG_FSL_FIXED_MMC_LOCATION
725 #define CONFIG_ENV_SIZE		0x2000
726 #define CONFIG_SYS_MMC_ENV_DEV	0
727 #elif defined(CONFIG_NAND_U_BOOT)
728 #define CONFIG_ENV_IS_IN_NAND
729 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
730 #define CONFIG_ENV_OFFSET	((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
731 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
732 #else
733 #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
734 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
735 #define CONFIG_ENV_SIZE		0x2000
736 #endif
737 #else
738 #define CONFIG_ENV_IS_IN_FLASH
739 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
740 #define CONFIG_ENV_ADDR	0xfff80000
741 #else
742 #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
743 #endif
744 #define CONFIG_ENV_SIZE		0x2000
745 #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
746 #endif
747 
748 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
749 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
750 
751 /*
752  * Command line configuration.
753  */
754 #include <config_cmd_default.h>
755 
756 #define CONFIG_CMD_IRQ
757 #define CONFIG_CMD_PING
758 #define CONFIG_CMD_I2C
759 #define CONFIG_CMD_MII
760 #define CONFIG_CMD_DATE
761 #define CONFIG_CMD_ELF
762 #define CONFIG_CMD_SETEXPR
763 #define CONFIG_CMD_REGINFO
764 
765 /*
766  * USB
767  */
768 #define CONFIG_HAS_FSL_DR_USB
769 
770 #if defined(CONFIG_HAS_FSL_DR_USB)
771 #define CONFIG_USB_EHCI
772 
773 #ifdef CONFIG_USB_EHCI
774 #define CONFIG_CMD_USB
775 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
776 #define CONFIG_USB_EHCI_FSL
777 #define CONFIG_USB_STORAGE
778 #endif
779 #endif
780 
781 #define CONFIG_MMC
782 
783 #ifdef CONFIG_MMC
784 #define CONFIG_FSL_ESDHC
785 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
786 #define CONFIG_CMD_MMC
787 #define CONFIG_GENERIC_MMC
788 #endif
789 
790 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
791 		 || defined(CONFIG_FSL_SATA)
792 #define CONFIG_CMD_EXT2
793 #define CONFIG_CMD_FAT
794 #define CONFIG_DOS_PARTITION
795 #endif
796 
797 #undef CONFIG_WATCHDOG	/* watchdog disabled */
798 
799 /*
800  * Miscellaneous configurable options
801  */
802 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
803 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
804 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
805 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
806 #if defined(CONFIG_CMD_KGDB)
807 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
808 #else
809 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
810 #endif
811 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
812 	/* Print Buffer Size */
813 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
814 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
815 #define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms tick */
816 
817 /*
818  * For booting Linux, the board info and command line data
819  * have to be in the first 64 MB of memory, since this is
820  * the maximum mapped by the Linux kernel during initialization.
821  */
822 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
823 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
824 
825 #if defined(CONFIG_CMD_KGDB)
826 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
827 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
828 #endif
829 
830 /*
831  * Environment Configuration
832  */
833 #define CONFIG_HOSTNAME		unknown
834 #define CONFIG_ROOTPATH		"/opt/nfsroot"
835 #define CONFIG_BOOTFILE		"uImage"
836 #define CONFIG_UBOOTPATH	u-boot.bin /* U-Boot image on TFTP server */
837 
838 /* default location for tftp and bootm */
839 #define CONFIG_LOADADDR	1000000
840 
841 #define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
842 #define CONFIG_BOOTARGS	/* the boot command will set bootargs */
843 
844 #define CONFIG_BAUDRATE	115200
845 
846 #ifdef __SW_BOOT_NOR
847 #define __NOR_RST_CMD	\
848 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
849 i2c mw 18 3 __SW_BOOT_MASK 1; reset
850 #endif
851 #ifdef __SW_BOOT_SPI
852 #define __SPI_RST_CMD	\
853 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
854 i2c mw 18 3 __SW_BOOT_MASK 1; reset
855 #endif
856 #ifdef __SW_BOOT_SD
857 #define __SD_RST_CMD	\
858 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
859 i2c mw 18 3 __SW_BOOT_MASK 1; reset
860 #endif
861 #ifdef __SW_BOOT_NAND
862 #define __NAND_RST_CMD	\
863 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
864 i2c mw 18 3 __SW_BOOT_MASK 1; reset
865 #endif
866 #ifdef __SW_BOOT_PCIE
867 #define __PCIE_RST_CMD	\
868 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
869 i2c mw 18 3 __SW_BOOT_MASK 1; reset
870 #endif
871 
872 #define	CONFIG_EXTRA_ENV_SETTINGS	\
873 "netdev=eth0\0"	\
874 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"	\
875 "loadaddr=1000000\0"	\
876 "bootfile=uImage\0"	\
877 "tftpflash=tftpboot $loadaddr $uboot; "	\
878 	"protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
879 	"erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
880 	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
881 	"protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
882 	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
883 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
884 "consoledev=ttyS0\0"	\
885 "ramdiskaddr=2000000\0"	\
886 "ramdiskfile=rootfs.ext2.gz.uboot\0"	\
887 "fdtaddr=c00000\0"	\
888 "bdev=sda1\0" \
889 "jffs2nor=mtdblock3\0"	\
890 "norbootaddr=ef080000\0"	\
891 "norfdtaddr=ef040000\0"	\
892 "jffs2nand=mtdblock9\0"	\
893 "nandbootaddr=100000\0"	\
894 "nandfdtaddr=80000\0"		\
895 "ramdisk_size=120000\0"	\
896 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
897 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
898 __stringify(__NOR_RST_CMD)"\0" \
899 __stringify(__SPI_RST_CMD)"\0" \
900 __stringify(__SD_RST_CMD)"\0" \
901 __stringify(__NAND_RST_CMD)"\0" \
902 __stringify(__PCIE_RST_CMD)"\0"
903 
904 #define CONFIG_NFSBOOTCOMMAND	\
905 "setenv bootargs root=/dev/nfs rw "	\
906 "nfsroot=$serverip:$rootpath "	\
907 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
908 "console=$consoledev,$baudrate $othbootargs;" \
909 "tftp $loadaddr $bootfile;"	\
910 "tftp $fdtaddr $fdtfile;"	\
911 "bootm $loadaddr - $fdtaddr"
912 
913 #define CONFIG_HDBOOT	\
914 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "	\
915 "console=$consoledev,$baudrate $othbootargs;" \
916 "usb start;"	\
917 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"	\
918 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"	\
919 "bootm $loadaddr - $fdtaddr"
920 
921 #define CONFIG_USB_FAT_BOOT	\
922 "setenv bootargs root=/dev/ram rw "	\
923 "console=$consoledev,$baudrate $othbootargs " \
924 "ramdisk_size=$ramdisk_size;"	\
925 "usb start;"	\
926 "fatload usb 0:2 $loadaddr $bootfile;"	\
927 "fatload usb 0:2 $fdtaddr $fdtfile;"	\
928 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"	\
929 "bootm $loadaddr $ramdiskaddr $fdtaddr"
930 
931 #define CONFIG_USB_EXT2_BOOT	\
932 "setenv bootargs root=/dev/ram rw "	\
933 "console=$consoledev,$baudrate $othbootargs " \
934 "ramdisk_size=$ramdisk_size;"	\
935 "usb start;"	\
936 "ext2load usb 0:4 $loadaddr $bootfile;"	\
937 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
938 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
939 "bootm $loadaddr $ramdiskaddr $fdtaddr"
940 
941 #define CONFIG_NORBOOT	\
942 "setenv bootargs root=/dev/$jffs2nor rw "	\
943 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"	\
944 "bootm $norbootaddr - $norfdtaddr"
945 
946 #define CONFIG_RAMBOOTCOMMAND	\
947 "setenv bootargs root=/dev/ram rw "	\
948 "console=$consoledev,$baudrate $othbootargs " \
949 "ramdisk_size=$ramdisk_size;"	\
950 "tftp $ramdiskaddr $ramdiskfile;"	\
951 "tftp $loadaddr $bootfile;"	\
952 "tftp $fdtaddr $fdtfile;"	\
953 "bootm $loadaddr $ramdiskaddr $fdtaddr"
954 
955 #define CONFIG_BOOTCOMMAND	CONFIG_HDBOOT
956 
957 #endif /* __CONFIG_H */
958