1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * QorIQ RDB boards configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #if defined(CONFIG_TARGET_P1020MBG) 14 #define CONFIG_BOARDNAME "P1020MBG-PC" 15 #define CONFIG_VSC7385_ENET 16 #define CONFIG_SLIC 17 #define __SW_BOOT_MASK 0x03 18 #define __SW_BOOT_NOR 0xe4 19 #define __SW_BOOT_SD 0x54 20 #define CONFIG_SYS_L2_SIZE (256 << 10) 21 #endif 22 23 #if defined(CONFIG_TARGET_P1020UTM) 24 #define CONFIG_BOARDNAME "P1020UTM-PC" 25 #define __SW_BOOT_MASK 0x03 26 #define __SW_BOOT_NOR 0xe0 27 #define __SW_BOOT_SD 0x50 28 #define CONFIG_SYS_L2_SIZE (256 << 10) 29 #endif 30 31 #if defined(CONFIG_TARGET_P1020RDB_PC) 32 #define CONFIG_BOARDNAME "P1020RDB-PC" 33 #define CONFIG_NAND_FSL_ELBC 34 #define CONFIG_VSC7385_ENET 35 #define CONFIG_SLIC 36 #define __SW_BOOT_MASK 0x03 37 #define __SW_BOOT_NOR 0x5c 38 #define __SW_BOOT_SPI 0x1c 39 #define __SW_BOOT_SD 0x9c 40 #define __SW_BOOT_NAND 0xec 41 #define __SW_BOOT_PCIE 0x6c 42 #define CONFIG_SYS_L2_SIZE (256 << 10) 43 #endif 44 45 /* 46 * P1020RDB-PD board has user selectable switches for evaluating different 47 * frequency and boot options for the P1020 device. The table that 48 * follow describe the available options. The front six binary number was in 49 * accordance with SW3[1:6]. 50 * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off 51 * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off 52 * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off 53 * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off 54 * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off 55 * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off 56 * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off 57 */ 58 #if defined(CONFIG_TARGET_P1020RDB_PD) 59 #define CONFIG_BOARDNAME "P1020RDB-PD" 60 #define CONFIG_NAND_FSL_ELBC 61 #define CONFIG_VSC7385_ENET 62 #define CONFIG_SLIC 63 #define __SW_BOOT_MASK 0x03 64 #define __SW_BOOT_NOR 0x64 65 #define __SW_BOOT_SPI 0x34 66 #define __SW_BOOT_SD 0x24 67 #define __SW_BOOT_NAND 0x44 68 #define __SW_BOOT_PCIE 0x74 69 #define CONFIG_SYS_L2_SIZE (256 << 10) 70 /* 71 * Dynamic MTD Partition support with mtdparts 72 */ 73 #define CONFIG_MTD_DEVICE 74 #define CONFIG_MTD_PARTITIONS 75 #define CONFIG_CMD_MTDPARTS 76 #define CONFIG_FLASH_CFI_MTD 77 #define MTDIDS_DEFAULT "nor0=ec000000.nor" 78 #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \ 79 "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)" 80 #endif 81 82 #if defined(CONFIG_TARGET_P1021RDB) 83 #define CONFIG_BOARDNAME "P1021RDB-PC" 84 #define CONFIG_NAND_FSL_ELBC 85 #define CONFIG_QE 86 #define CONFIG_VSC7385_ENET 87 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 88 addresses in the LBC */ 89 #define __SW_BOOT_MASK 0x03 90 #define __SW_BOOT_NOR 0x5c 91 #define __SW_BOOT_SPI 0x1c 92 #define __SW_BOOT_SD 0x9c 93 #define __SW_BOOT_NAND 0xec 94 #define __SW_BOOT_PCIE 0x6c 95 #define CONFIG_SYS_L2_SIZE (256 << 10) 96 /* 97 * Dynamic MTD Partition support with mtdparts 98 */ 99 #define CONFIG_MTD_DEVICE 100 #define CONFIG_MTD_PARTITIONS 101 #define CONFIG_CMD_MTDPARTS 102 #define CONFIG_FLASH_CFI_MTD 103 #ifdef CONFIG_PHYS_64BIT 104 #define MTDIDS_DEFAULT "nor0=fef000000.nor" 105 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ 106 "256k(dtb),4608k(kernel),9728k(fs)," \ 107 "256k(qe-ucode-firmware),1280k(u-boot)" 108 #else 109 #define MTDIDS_DEFAULT "nor0=ef000000.nor" 110 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ 111 "256k(dtb),4608k(kernel),9728k(fs)," \ 112 "256k(qe-ucode-firmware),1280k(u-boot)" 113 #endif 114 #endif 115 116 #if defined(CONFIG_TARGET_P1024RDB) 117 #define CONFIG_BOARDNAME "P1024RDB" 118 #define CONFIG_NAND_FSL_ELBC 119 #define CONFIG_SLIC 120 #define __SW_BOOT_MASK 0xf3 121 #define __SW_BOOT_NOR 0x00 122 #define __SW_BOOT_SPI 0x08 123 #define __SW_BOOT_SD 0x04 124 #define __SW_BOOT_NAND 0x0c 125 #define CONFIG_SYS_L2_SIZE (256 << 10) 126 #endif 127 128 #if defined(CONFIG_TARGET_P1025RDB) 129 #define CONFIG_BOARDNAME "P1025RDB" 130 #define CONFIG_NAND_FSL_ELBC 131 #define CONFIG_QE 132 #define CONFIG_SLIC 133 134 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of 135 addresses in the LBC */ 136 #define __SW_BOOT_MASK 0xf3 137 #define __SW_BOOT_NOR 0x00 138 #define __SW_BOOT_SPI 0x08 139 #define __SW_BOOT_SD 0x04 140 #define __SW_BOOT_NAND 0x0c 141 #define CONFIG_SYS_L2_SIZE (256 << 10) 142 #endif 143 144 #if defined(CONFIG_TARGET_P2020RDB) 145 #define CONFIG_BOARDNAME "P2020RDB-PC" 146 #define CONFIG_NAND_FSL_ELBC 147 #define CONFIG_VSC7385_ENET 148 #define __SW_BOOT_MASK 0x03 149 #define __SW_BOOT_NOR 0xc8 150 #define __SW_BOOT_SPI 0x28 151 #define __SW_BOOT_SD 0x68 /* or 0x18 */ 152 #define __SW_BOOT_NAND 0xe8 153 #define __SW_BOOT_PCIE 0xa8 154 #define CONFIG_SYS_L2_SIZE (512 << 10) 155 /* 156 * Dynamic MTD Partition support with mtdparts 157 */ 158 #define CONFIG_MTD_DEVICE 159 #define CONFIG_MTD_PARTITIONS 160 #define CONFIG_CMD_MTDPARTS 161 #define CONFIG_FLASH_CFI_MTD 162 #ifdef CONFIG_PHYS_64BIT 163 #define MTDIDS_DEFAULT "nor0=fef000000.nor" 164 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ 165 "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" 166 #else 167 #define MTDIDS_DEFAULT "nor0=ef000000.nor" 168 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ 169 "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" 170 #endif 171 #endif 172 173 #ifdef CONFIG_SDCARD 174 #define CONFIG_SPL_MMC_MINIMAL 175 #define CONFIG_SPL_FLUSH_IMAGE 176 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 177 #define CONFIG_SYS_TEXT_BASE 0x11001000 178 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 179 #define CONFIG_SPL_PAD_TO 0x20000 180 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 181 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 182 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 183 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 184 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 185 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 186 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 187 #define CONFIG_SPL_MMC_BOOT 188 #ifdef CONFIG_SPL_BUILD 189 #define CONFIG_SPL_COMMON_INIT_DDR 190 #endif 191 #endif 192 193 #ifdef CONFIG_SPIFLASH 194 #define CONFIG_SPL_SPI_FLASH_MINIMAL 195 #define CONFIG_SPL_FLUSH_IMAGE 196 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 197 #define CONFIG_SYS_TEXT_BASE 0x11001000 198 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 199 #define CONFIG_SPL_PAD_TO 0x20000 200 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 201 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 202 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 203 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 204 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 205 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 206 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 207 #define CONFIG_SPL_SPI_BOOT 208 #ifdef CONFIG_SPL_BUILD 209 #define CONFIG_SPL_COMMON_INIT_DDR 210 #endif 211 #endif 212 213 #ifdef CONFIG_NAND 214 #ifdef CONFIG_TPL_BUILD 215 #define CONFIG_SPL_NAND_BOOT 216 #define CONFIG_SPL_FLUSH_IMAGE 217 #define CONFIG_SPL_NAND_INIT 218 #define CONFIG_SPL_COMMON_INIT_DDR 219 #define CONFIG_SPL_MAX_SIZE (128 << 10) 220 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 221 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 222 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 223 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 224 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 225 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 226 #elif defined(CONFIG_SPL_BUILD) 227 #define CONFIG_SPL_INIT_MINIMAL 228 #define CONFIG_SPL_FLUSH_IMAGE 229 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 230 #define CONFIG_SPL_TEXT_BASE 0xff800000 231 #define CONFIG_SPL_MAX_SIZE 4096 232 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 233 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 234 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 235 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 236 #endif /* not CONFIG_TPL_BUILD */ 237 238 #define CONFIG_SPL_PAD_TO 0x20000 239 #define CONFIG_TPL_PAD_TO 0x20000 240 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 241 #define CONFIG_SYS_TEXT_BASE 0x11001000 242 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 243 #endif 244 245 #ifndef CONFIG_SYS_TEXT_BASE 246 #define CONFIG_SYS_TEXT_BASE 0xeff40000 247 #endif 248 249 #ifndef CONFIG_RESET_VECTOR_ADDRESS 250 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 251 #endif 252 253 #ifndef CONFIG_SYS_MONITOR_BASE 254 #ifdef CONFIG_SPL_BUILD 255 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 256 #else 257 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 258 #endif 259 #endif 260 261 #define CONFIG_MP 262 263 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 264 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 265 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 266 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 267 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 268 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 269 270 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 271 #define CONFIG_ENV_OVERWRITE 272 273 #define CONFIG_CMD_SATA 274 #define CONFIG_SATA_SIL 275 #define CONFIG_SYS_SATA_MAX_DEVICE 2 276 #define CONFIG_LIBATA 277 #define CONFIG_LBA48 278 279 #if defined(CONFIG_TARGET_P2020RDB) 280 #define CONFIG_SYS_CLK_FREQ 100000000 281 #else 282 #define CONFIG_SYS_CLK_FREQ 66666666 283 #endif 284 #define CONFIG_DDR_CLK_FREQ 66666666 285 286 #define CONFIG_HWCONFIG 287 /* 288 * These can be toggled for performance analysis, otherwise use default. 289 */ 290 #define CONFIG_L2_CACHE 291 #define CONFIG_BTB 292 293 #define CONFIG_ENABLE_36BIT_PHYS 294 295 #ifdef CONFIG_PHYS_64BIT 296 #define CONFIG_ADDR_MAP 1 297 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 298 #endif 299 300 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 301 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 302 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 303 304 #define CONFIG_SYS_CCSRBAR 0xffe00000 305 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 306 307 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 308 SPL code*/ 309 #ifdef CONFIG_SPL_BUILD 310 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 311 #endif 312 313 /* DDR Setup */ 314 #define CONFIG_SYS_DDR_RAW_TIMING 315 #define CONFIG_DDR_SPD 316 #define CONFIG_SYS_SPD_BUS_NUM 1 317 #define SPD_EEPROM_ADDRESS 0x52 318 #undef CONFIG_FSL_DDR_INTERACTIVE 319 320 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) 321 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 322 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 323 #else 324 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G 325 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 326 #endif 327 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 328 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 329 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 330 331 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 332 333 /* Default settings for DDR3 */ 334 #ifndef CONFIG_TARGET_P2020RDB 335 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 336 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 337 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 338 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 339 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 340 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 341 342 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 343 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 344 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 345 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 346 347 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 348 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 349 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 350 #define CONFIG_SYS_DDR_RCW_1 0x00000000 351 #define CONFIG_SYS_DDR_RCW_2 0x00000000 352 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 353 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 354 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 355 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 356 357 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 358 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 359 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 360 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 361 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 362 #define CONFIG_SYS_DDR_MODE_1 0x40461520 363 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 364 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 365 #endif 366 367 #undef CONFIG_CLOCKS_IN_MHZ 368 369 /* 370 * Memory map 371 * 372 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 373 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) 374 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 375 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable 376 * (early boot only) 377 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0 378 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2 379 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3 380 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2 381 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 382 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 383 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 384 */ 385 386 /* 387 * Local Bus Definitions 388 */ 389 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) 390 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 391 #define CONFIG_SYS_FLASH_BASE 0xec000000 392 #elif defined(CONFIG_TARGET_P1020UTM) 393 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 394 #define CONFIG_SYS_FLASH_BASE 0xee000000 395 #else 396 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */ 397 #define CONFIG_SYS_FLASH_BASE 0xef000000 398 #endif 399 400 #ifdef CONFIG_PHYS_64BIT 401 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 402 #else 403 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 404 #endif 405 406 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 407 | BR_PS_16 | BR_V) 408 409 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 410 411 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 412 #define CONFIG_SYS_FLASH_QUIET_TEST 413 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 414 415 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 416 417 #undef CONFIG_SYS_FLASH_CHECKSUM 418 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 419 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 420 421 #define CONFIG_FLASH_CFI_DRIVER 422 #define CONFIG_SYS_FLASH_CFI 423 #define CONFIG_SYS_FLASH_EMPTY_INFO 424 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 425 426 /* Nand Flash */ 427 #ifdef CONFIG_NAND_FSL_ELBC 428 #define CONFIG_SYS_NAND_BASE 0xff800000 429 #ifdef CONFIG_PHYS_64BIT 430 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 431 #else 432 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 433 #endif 434 435 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 436 #define CONFIG_SYS_MAX_NAND_DEVICE 1 437 #define CONFIG_CMD_NAND 438 #if defined(CONFIG_TARGET_P1020RDB_PD) 439 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 440 #else 441 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 442 #endif 443 444 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 445 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 446 | BR_PS_8 /* Port Size = 8 bit */ \ 447 | BR_MS_FCM /* MSEL = FCM */ \ 448 | BR_V) /* valid */ 449 #if defined(CONFIG_TARGET_P1020RDB_PD) 450 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ 451 | OR_FCM_PGS /* Large Page*/ \ 452 | OR_FCM_CSCT \ 453 | OR_FCM_CST \ 454 | OR_FCM_CHT \ 455 | OR_FCM_SCY_1 \ 456 | OR_FCM_TRLX \ 457 | OR_FCM_EHTR) 458 #else 459 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ 460 | OR_FCM_CSCT \ 461 | OR_FCM_CST \ 462 | OR_FCM_CHT \ 463 | OR_FCM_SCY_1 \ 464 | OR_FCM_TRLX \ 465 | OR_FCM_EHTR) 466 #endif 467 #endif /* CONFIG_NAND_FSL_ELBC */ 468 469 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 470 471 #define CONFIG_SYS_INIT_RAM_LOCK 472 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 473 #ifdef CONFIG_PHYS_64BIT 474 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 475 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 476 /* The assembler doesn't like typecast */ 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 478 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 479 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 480 #else 481 /* Initial L1 address */ 482 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 483 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 485 #endif 486 /* Size of used area in RAM */ 487 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 488 489 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 490 GENERATED_GBL_DATA_SIZE) 491 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 492 493 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 494 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 495 496 #define CONFIG_SYS_CPLD_BASE 0xffa00000 497 #ifdef CONFIG_PHYS_64BIT 498 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull 499 #else 500 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 501 #endif 502 /* CPLD config size: 1Mb */ 503 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \ 504 BR_PS_8 | BR_V) 505 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7) 506 507 #define CONFIG_SYS_PMC_BASE 0xff980000 508 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 509 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 510 BR_PS_8 | BR_V) 511 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 512 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 513 OR_GPCM_EAD) 514 515 #ifdef CONFIG_NAND 516 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 517 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 518 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 519 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 520 #else 521 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 522 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 523 #ifdef CONFIG_NAND_FSL_ELBC 524 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 525 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 526 #endif 527 #endif 528 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ 529 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ 530 531 /* Vsc7385 switch */ 532 #ifdef CONFIG_VSC7385_ENET 533 #define CONFIG_SYS_VSC7385_BASE 0xffb00000 534 535 #ifdef CONFIG_PHYS_64BIT 536 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull 537 #else 538 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE 539 #endif 540 541 #define CONFIG_SYS_VSC7385_BR_PRELIM \ 542 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V) 543 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \ 544 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ 545 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 546 547 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM 548 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM 549 550 /* The size of the VSC7385 firmware image */ 551 #define CONFIG_VSC7385_IMAGE_SIZE 8192 552 #endif 553 554 /* 555 * Config the L2 Cache as L2 SRAM 556 */ 557 #if defined(CONFIG_SPL_BUILD) 558 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 559 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 560 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 561 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 562 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 563 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 564 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 565 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 566 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 567 #if defined(CONFIG_TARGET_P2020RDB) 568 #define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) 569 #else 570 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 571 #endif 572 #elif defined(CONFIG_NAND) 573 #ifdef CONFIG_TPL_BUILD 574 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 575 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 576 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 577 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 578 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 579 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 580 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 581 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 582 #else 583 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 584 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 585 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 586 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 587 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 588 #endif /* CONFIG_TPL_BUILD */ 589 #endif 590 #endif 591 592 /* Serial Port - controlled on board with jumper J8 593 * open - index 2 594 * shorted - index 1 595 */ 596 #define CONFIG_CONS_INDEX 1 597 #undef CONFIG_SERIAL_SOFTWARE_FIFO 598 #define CONFIG_SYS_NS16550_SERIAL 599 #define CONFIG_SYS_NS16550_REG_SIZE 1 600 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 601 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 602 #define CONFIG_NS16550_MIN_FUNCTIONS 603 #endif 604 605 #define CONFIG_SYS_BAUDRATE_TABLE \ 606 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 607 608 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 609 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 610 611 /* I2C */ 612 #define CONFIG_SYS_I2C 613 #define CONFIG_SYS_I2C_FSL 614 #define CONFIG_SYS_FSL_I2C_SPEED 400000 615 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 616 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 617 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 618 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 619 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 620 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 621 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 622 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 623 624 /* 625 * I2C2 EEPROM 626 */ 627 #undef CONFIG_ID_EEPROM 628 629 #define CONFIG_RTC_PT7C4338 630 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 631 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 632 633 /* enable read and write access to EEPROM */ 634 #define CONFIG_CMD_EEPROM 635 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 636 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 637 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 638 639 /* 640 * eSPI - Enhanced SPI 641 */ 642 #define CONFIG_HARD_SPI 643 644 #if defined(CONFIG_SPI_FLASH) 645 #define CONFIG_SF_DEFAULT_SPEED 10000000 646 #define CONFIG_SF_DEFAULT_MODE 0 647 #endif 648 649 #if defined(CONFIG_PCI) 650 /* 651 * General PCI 652 * Memory space is mapped 1-1, but I/O space must start from 0. 653 */ 654 655 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 656 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT" 657 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 658 #ifdef CONFIG_PHYS_64BIT 659 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 660 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 661 #else 662 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 663 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 664 #endif 665 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 666 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 667 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 668 #ifdef CONFIG_PHYS_64BIT 669 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 670 #else 671 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 672 #endif 673 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 674 675 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 676 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" 677 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 678 #ifdef CONFIG_PHYS_64BIT 679 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 680 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 681 #else 682 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 683 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 684 #endif 685 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 686 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 687 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 688 #ifdef CONFIG_PHYS_64BIT 689 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 690 #else 691 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 692 #endif 693 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 694 695 #define CONFIG_CMD_PCI 696 697 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 698 #endif /* CONFIG_PCI */ 699 700 #if defined(CONFIG_TSEC_ENET) 701 #define CONFIG_MII /* MII PHY management */ 702 #define CONFIG_TSEC1 703 #define CONFIG_TSEC1_NAME "eTSEC1" 704 #define CONFIG_TSEC2 705 #define CONFIG_TSEC2_NAME "eTSEC2" 706 #define CONFIG_TSEC3 707 #define CONFIG_TSEC3_NAME "eTSEC3" 708 709 #define TSEC1_PHY_ADDR 2 710 #define TSEC2_PHY_ADDR 0 711 #define TSEC3_PHY_ADDR 1 712 713 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 714 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 715 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 716 717 #define TSEC1_PHYIDX 0 718 #define TSEC2_PHYIDX 0 719 #define TSEC3_PHYIDX 0 720 721 #define CONFIG_ETHPRIME "eTSEC1" 722 723 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 724 725 #define CONFIG_HAS_ETH0 726 #define CONFIG_HAS_ETH1 727 #define CONFIG_HAS_ETH2 728 #endif /* CONFIG_TSEC_ENET */ 729 730 #ifdef CONFIG_QE 731 /* QE microcode/firmware address */ 732 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 733 #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 734 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 735 #endif /* CONFIG_QE */ 736 737 #ifdef CONFIG_TARGET_P1025RDB 738 /* 739 * QE UEC ethernet configuration 740 */ 741 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 742 743 #undef CONFIG_UEC_ETH 744 #define CONFIG_PHY_MODE_NEED_CHANGE 745 746 #define CONFIG_UEC_ETH1 /* ETH1 */ 747 #define CONFIG_HAS_ETH0 748 749 #ifdef CONFIG_UEC_ETH1 750 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 751 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ 752 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ 753 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 754 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */ 755 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 756 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 757 #endif /* CONFIG_UEC_ETH1 */ 758 759 #define CONFIG_UEC_ETH5 /* ETH5 */ 760 #define CONFIG_HAS_ETH1 761 762 #ifdef CONFIG_UEC_ETH5 763 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ 764 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE 765 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ 766 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH 767 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */ 768 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 769 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 770 #endif /* CONFIG_UEC_ETH5 */ 771 #endif /* CONFIG_TARGET_P1025RDB */ 772 773 /* 774 * Environment 775 */ 776 #ifdef CONFIG_SPIFLASH 777 #define CONFIG_ENV_IS_IN_SPI_FLASH 778 #define CONFIG_ENV_SPI_BUS 0 779 #define CONFIG_ENV_SPI_CS 0 780 #define CONFIG_ENV_SPI_MAX_HZ 10000000 781 #define CONFIG_ENV_SPI_MODE 0 782 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 783 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 784 #define CONFIG_ENV_SECT_SIZE 0x10000 785 #elif defined(CONFIG_SDCARD) 786 #define CONFIG_ENV_IS_IN_MMC 787 #define CONFIG_FSL_FIXED_MMC_LOCATION 788 #define CONFIG_ENV_SIZE 0x2000 789 #define CONFIG_SYS_MMC_ENV_DEV 0 790 #elif defined(CONFIG_NAND) 791 #ifdef CONFIG_TPL_BUILD 792 #define CONFIG_ENV_SIZE 0x2000 793 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 794 #else 795 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 796 #endif 797 #define CONFIG_ENV_IS_IN_NAND 798 #define CONFIG_ENV_OFFSET (1024 * 1024) 799 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 800 #elif defined(CONFIG_SYS_RAMBOOT) 801 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 802 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 803 #define CONFIG_ENV_SIZE 0x2000 804 #else 805 #define CONFIG_ENV_IS_IN_FLASH 806 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 807 #define CONFIG_ENV_SIZE 0x2000 808 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 809 #endif 810 811 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 812 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 813 814 /* 815 * Command line configuration. 816 */ 817 #define CONFIG_CMD_IRQ 818 #define CONFIG_CMD_REGINFO 819 820 /* 821 * USB 822 */ 823 #define CONFIG_HAS_FSL_DR_USB 824 825 #if defined(CONFIG_HAS_FSL_DR_USB) 826 #ifdef CONFIG_USB_EHCI_HCD 827 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 828 #define CONFIG_USB_EHCI_FSL 829 #endif 830 #endif 831 832 #if defined(CONFIG_TARGET_P1020RDB_PD) 833 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 834 #endif 835 836 #ifdef CONFIG_MMC 837 #define CONFIG_FSL_ESDHC 838 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 839 #endif 840 841 #undef CONFIG_WATCHDOG /* watchdog disabled */ 842 843 /* 844 * Miscellaneous configurable options 845 */ 846 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 847 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 848 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 849 #if defined(CONFIG_CMD_KGDB) 850 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 851 #else 852 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 853 #endif 854 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 855 /* Print Buffer Size */ 856 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 857 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 858 859 /* 860 * For booting Linux, the board info and command line data 861 * have to be in the first 64 MB of memory, since this is 862 * the maximum mapped by the Linux kernel during initialization. 863 */ 864 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 865 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 866 867 #if defined(CONFIG_CMD_KGDB) 868 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 869 #endif 870 871 /* 872 * Environment Configuration 873 */ 874 #define CONFIG_HOSTNAME unknown 875 #define CONFIG_ROOTPATH "/opt/nfsroot" 876 #define CONFIG_BOOTFILE "uImage" 877 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 878 879 /* default location for tftp and bootm */ 880 #define CONFIG_LOADADDR 1000000 881 882 #define CONFIG_BOOTARGS /* the boot command will set bootargs */ 883 884 #ifdef __SW_BOOT_NOR 885 #define __NOR_RST_CMD \ 886 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ 887 i2c mw 18 3 __SW_BOOT_MASK 1; reset 888 #endif 889 #ifdef __SW_BOOT_SPI 890 #define __SPI_RST_CMD \ 891 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \ 892 i2c mw 18 3 __SW_BOOT_MASK 1; reset 893 #endif 894 #ifdef __SW_BOOT_SD 895 #define __SD_RST_CMD \ 896 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \ 897 i2c mw 18 3 __SW_BOOT_MASK 1; reset 898 #endif 899 #ifdef __SW_BOOT_NAND 900 #define __NAND_RST_CMD \ 901 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \ 902 i2c mw 18 3 __SW_BOOT_MASK 1; reset 903 #endif 904 #ifdef __SW_BOOT_PCIE 905 #define __PCIE_RST_CMD \ 906 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \ 907 i2c mw 18 3 __SW_BOOT_MASK 1; reset 908 #endif 909 910 #define CONFIG_EXTRA_ENV_SETTINGS \ 911 "netdev=eth0\0" \ 912 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 913 "loadaddr=1000000\0" \ 914 "bootfile=uImage\0" \ 915 "tftpflash=tftpboot $loadaddr $uboot; " \ 916 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 917 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 918 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 919 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 920 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 921 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ 922 "consoledev=ttyS0\0" \ 923 "ramdiskaddr=2000000\0" \ 924 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 925 "fdtaddr=1e00000\0" \ 926 "bdev=sda1\0" \ 927 "jffs2nor=mtdblock3\0" \ 928 "norbootaddr=ef080000\0" \ 929 "norfdtaddr=ef040000\0" \ 930 "jffs2nand=mtdblock9\0" \ 931 "nandbootaddr=100000\0" \ 932 "nandfdtaddr=80000\0" \ 933 "ramdisk_size=120000\0" \ 934 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ 935 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ 936 __stringify(__NOR_RST_CMD)"\0" \ 937 __stringify(__SPI_RST_CMD)"\0" \ 938 __stringify(__SD_RST_CMD)"\0" \ 939 __stringify(__NAND_RST_CMD)"\0" \ 940 __stringify(__PCIE_RST_CMD)"\0" 941 942 #define CONFIG_NFSBOOTCOMMAND \ 943 "setenv bootargs root=/dev/nfs rw " \ 944 "nfsroot=$serverip:$rootpath " \ 945 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 946 "console=$consoledev,$baudrate $othbootargs;" \ 947 "tftp $loadaddr $bootfile;" \ 948 "tftp $fdtaddr $fdtfile;" \ 949 "bootm $loadaddr - $fdtaddr" 950 951 #define CONFIG_HDBOOT \ 952 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 953 "console=$consoledev,$baudrate $othbootargs;" \ 954 "usb start;" \ 955 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 956 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 957 "bootm $loadaddr - $fdtaddr" 958 959 #define CONFIG_USB_FAT_BOOT \ 960 "setenv bootargs root=/dev/ram rw " \ 961 "console=$consoledev,$baudrate $othbootargs " \ 962 "ramdisk_size=$ramdisk_size;" \ 963 "usb start;" \ 964 "fatload usb 0:2 $loadaddr $bootfile;" \ 965 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 966 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 967 "bootm $loadaddr $ramdiskaddr $fdtaddr" 968 969 #define CONFIG_USB_EXT2_BOOT \ 970 "setenv bootargs root=/dev/ram rw " \ 971 "console=$consoledev,$baudrate $othbootargs " \ 972 "ramdisk_size=$ramdisk_size;" \ 973 "usb start;" \ 974 "ext2load usb 0:4 $loadaddr $bootfile;" \ 975 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 976 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 977 "bootm $loadaddr $ramdiskaddr $fdtaddr" 978 979 #define CONFIG_NORBOOT \ 980 "setenv bootargs root=/dev/$jffs2nor rw " \ 981 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 982 "bootm $norbootaddr - $norfdtaddr" 983 984 #define CONFIG_RAMBOOTCOMMAND \ 985 "setenv bootargs root=/dev/ram rw " \ 986 "console=$consoledev,$baudrate $othbootargs " \ 987 "ramdisk_size=$ramdisk_size;" \ 988 "tftp $ramdiskaddr $ramdiskfile;" \ 989 "tftp $loadaddr $bootfile;" \ 990 "tftp $fdtaddr $fdtfile;" \ 991 "bootm $loadaddr $ramdiskaddr $fdtaddr" 992 993 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 994 995 #endif /* __CONFIG_H */ 996