1 /* 2 * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. 3 * Copyright (C) 2014 Bachmann electronic GmbH 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __CONFIG_H 9 #define __CONFIG_H 10 11 #include "mx6_common.h" 12 13 /* Size of malloc() pool */ 14 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 15 16 #define CONFIG_MISC_INIT_R 17 18 /* UART Configs */ 19 #define CONFIG_MXC_UART 20 #define CONFIG_MXC_UART_BASE UART1_BASE 21 22 /* SF Configs */ 23 #define CONFIG_SPI 24 #define CONFIG_SF_DEFAULT_BUS 2 25 #define CONFIG_SF_DEFAULT_CS 0 26 #define CONFIG_SF_DEFAULT_SPEED 25000000 27 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) 28 29 /* IO expander */ 30 #define CONFIG_PCA953X 31 #define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 32 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } 33 34 /* I2C Configs */ 35 #define CONFIG_SYS_I2C 36 #define CONFIG_SYS_I2C_MXC 37 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 38 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 39 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 40 #define CONFIG_SYS_I2C_SPEED 100000 41 42 /* OCOTP Configs */ 43 #define CONFIG_IMX_OTP 44 #define IMX_OTP_BASE OCOTP_BASE_ADDR 45 #define IMX_OTP_ADDR_MAX 0x7F 46 #define IMX_OTP_DATA_ERROR_VAL 0xBADABADA 47 #define IMX_OTPWRITE_ENABLED 48 49 /* MMC Configs */ 50 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 51 #define CONFIG_SYS_FSL_USDHC_NUM 2 52 53 /* USB Configs */ 54 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 55 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 56 57 /* 58 * SATA Configs 59 */ 60 #ifdef CONFIG_CMD_SATA 61 #define CONFIG_SYS_SATA_MAX_DEVICE 1 62 #define CONFIG_DWC_AHSATA_PORT_ID 0 63 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 64 #define CONFIG_LBA48 65 #endif 66 67 /* SPL */ 68 #ifdef CONFIG_SPL 69 #include "imx6_spl.h" 70 #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) 71 #endif 72 73 #define CONFIG_FEC_MXC 74 #define CONFIG_MII 75 #define IMX_FEC_BASE ENET_BASE_ADDR 76 #define CONFIG_FEC_XCV_TYPE MII100 77 #define CONFIG_ETHPRIME "FEC" 78 #define CONFIG_FEC_MXC_PHYADDR 0x5 79 #define CONFIG_PHY_SMSC 80 81 #ifndef CONFIG_SPL 82 #define CONFIG_ENV_EEPROM_IS_ON_I2C 83 #define CONFIG_SYS_I2C_EEPROM_BUS 1 84 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 85 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 86 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 87 #endif 88 89 #define CONFIG_PREBOOT "" 90 91 /* Thermal support */ 92 #define CONFIG_IMX_THERMAL 93 94 /* Physical Memory Map */ 95 #define CONFIG_NR_DRAM_BANKS 1 96 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 97 98 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 99 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 100 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 101 102 #define CONFIG_SYS_INIT_SP_OFFSET \ 103 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 104 #define CONFIG_SYS_INIT_SP_ADDR \ 105 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 106 107 /* Environment organization */ 108 #define CONFIG_ENV_SIZE (64 * 1024) /* 64 kb */ 109 #define CONFIG_ENV_OFFSET (1024 * 1024) 110 /* M25P16 has an erase size of 64 KiB */ 111 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 112 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 113 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 114 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 115 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 116 117 #define CONFIG_BOOTP_SERVERIP 118 #define CONFIG_BOOTP_BOOTFILE 119 120 #endif /* __CONFIG_H */ 121