xref: /openbmc/u-boot/include/configs/ot1200.h (revision 5396b2a9)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
4  * Copyright (C) 2014 Bachmann electronic GmbH
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 #include "mx6_common.h"
11 
12 /* Size of malloc() pool */
13 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
14 
15 /* UART Configs */
16 #define CONFIG_MXC_UART
17 #define CONFIG_MXC_UART_BASE           UART1_BASE
18 
19 /* SF Configs */
20 
21 /* IO expander */
22 #define CONFIG_PCA953X
23 #define CONFIG_SYS_I2C_PCA953X_ADDR	0x20
24 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x20, 16} }
25 
26 /* I2C Configs */
27 #define CONFIG_SYS_I2C
28 #define CONFIG_SYS_I2C_MXC
29 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
30 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
31 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
32 #define CONFIG_SYS_I2C_SPEED            100000
33 
34 /* OCOTP Configs */
35 #define CONFIG_IMX_OTP
36 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
37 #define IMX_OTP_ADDR_MAX                0x7F
38 #define IMX_OTP_DATA_ERROR_VAL          0xBADABADA
39 #define IMX_OTPWRITE_ENABLED
40 
41 /* MMC Configs */
42 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
43 #define CONFIG_SYS_FSL_USDHC_NUM       2
44 
45 /* USB Configs */
46 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
47 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
48 
49 /*
50  * SATA Configs
51  */
52 #ifdef CONFIG_CMD_SATA
53 #define CONFIG_SYS_SATA_MAX_DEVICE	1
54 #define CONFIG_DWC_AHSATA_PORT_ID	0
55 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
56 #define CONFIG_LBA48
57 #endif
58 
59 /* SPL */
60 #ifdef CONFIG_SPL
61 #include "imx6_spl.h"
62 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
63 #endif
64 
65 #define CONFIG_FEC_MXC
66 #define IMX_FEC_BASE                    ENET_BASE_ADDR
67 #define CONFIG_FEC_XCV_TYPE             MII100
68 #define CONFIG_ETHPRIME                 "FEC"
69 #define CONFIG_FEC_MXC_PHYADDR          0x5
70 #define CONFIG_PHY_SMSC
71 
72 #ifndef CONFIG_SPL
73 #define CONFIG_ENV_EEPROM_IS_ON_I2C
74 #define CONFIG_SYS_I2C_EEPROM_BUS             1
75 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
76 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
77 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
78 #endif
79 
80 #define CONFIG_PREBOOT                 ""
81 
82 /* Thermal support */
83 #define CONFIG_IMX_THERMAL
84 
85 /* Physical Memory Map */
86 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
87 
88 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
89 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
90 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
91 
92 #define CONFIG_SYS_INIT_SP_OFFSET \
93 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
94 #define CONFIG_SYS_INIT_SP_ADDR \
95 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
96 
97 /* Environment organization */
98 #define CONFIG_ENV_SIZE                 (64 * 1024)	/* 64 kb */
99 #define CONFIG_ENV_OFFSET               (1024 * 1024)
100 /* M25P16 has an erase size of 64 KiB */
101 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
102 
103 #define CONFIG_BOOTP_SERVERIP
104 #define CONFIG_BOOTP_BOOTFILE
105 
106 #endif         /* __CONFIG_H */
107