1 /* 2 * Copyright (C) 2011 Samsung Electronics 3 * 4 * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_ORIGEN_H 10 #define __CONFIG_ORIGEN_H 11 12 #include <configs/exynos4-common.h> 13 14 /* High Level Configuration Options */ 15 #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ 16 #define CONFIG_ORIGEN 1 /* working with ORIGEN*/ 17 18 #define CONFIG_SYS_DCACHE_OFF 1 19 20 /* ORIGEN has 4 bank of DRAM */ 21 #define CONFIG_NR_DRAM_BANKS 4 22 #define CONFIG_SYS_SDRAM_BASE 0x40000000 23 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE 24 #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ 25 26 /* memtest works on */ 27 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 28 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) 29 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) 30 31 #define CONFIG_SYS_TEXT_BASE 0x43E00000 32 33 #define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN 34 35 /* select serial console configuration */ 36 #define CONFIG_SERIAL2 37 38 /* Console configuration */ 39 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" 40 41 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ 42 43 #define CONFIG_SYS_MONITOR_BASE 0x00000000 44 45 /* Power Down Modes */ 46 #define S5P_CHECK_SLEEP 0x00000BAD 47 #define S5P_CHECK_DIDLE 0xBAD00000 48 #define S5P_CHECK_LPA 0xABAD0000 49 50 #define CONFIG_SUPPORT_RAW_INITRD 51 52 /* MMC SPL */ 53 #define COPY_BL2_FNPTR_ADDR 0x02020030 54 #define CONFIG_SPL_TEXT_BASE 0x02021410 55 56 #define CONFIG_EXTRA_ENV_SETTINGS \ 57 "loadaddr=0x40007000\0" \ 58 "rdaddr=0x48000000\0" \ 59 "kerneladdr=0x40007000\0" \ 60 "ramdiskaddr=0x48000000\0" \ 61 "console=ttySAC2,115200n8\0" \ 62 "mmcdev=0\0" \ 63 "bootenv=uEnv.txt\0" \ 64 "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ 65 "importbootenv=echo Importing environment from mmc ...; " \ 66 "env import -t $loadaddr $filesize\0" \ 67 "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 68 "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ 69 "source ${loadaddr}\0" 70 #define CONFIG_BOOTCOMMAND \ 71 "if mmc rescan; then " \ 72 "echo SD/MMC found on device ${mmcdev};" \ 73 "if run loadbootenv; then " \ 74 "echo Loaded environment from ${bootenv};" \ 75 "run importbootenv;" \ 76 "fi;" \ 77 "if test -n $uenvcmd; then " \ 78 "echo Running uenvcmd ...;" \ 79 "run uenvcmd;" \ 80 "fi;" \ 81 "if run loadbootscript; then " \ 82 "run bootscript; " \ 83 "fi; " \ 84 "fi;" \ 85 "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " 86 87 #define CONFIG_CLK_1000_400_200 88 89 /* MIU (Memory Interleaving Unit) */ 90 #define CONFIG_MIU_2BIT_21_7_INTERLEAVED 91 92 #define CONFIG_ENV_IS_IN_MMC 93 #define CONFIG_SYS_MMC_ENV_DEV 0 94 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ 95 #define RESERVE_BLOCK_SIZE (512) 96 #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ 97 #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) 98 99 #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" 100 #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) 101 102 #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 103 104 /* U-Boot copy size from boot Media to DRAM.*/ 105 #define COPY_BL2_SIZE 0x80000 106 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) 107 #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) 108 109 #endif /* __CONFIG_H */ 110