xref: /openbmc/u-boot/include/configs/origen.h (revision 70ad375e)
1 /*
2  * Copyright (C) 2011 Samsung Electronics
3  *
4  * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_ORIGEN_H
10 #define __CONFIG_ORIGEN_H
11 
12 #include <configs/exynos4-dt.h>
13 
14 #define CONFIG_SYS_PROMPT		"ORIGEN # "
15 
16 #undef CONFIG_DEFAULT_DEVICE_TREE
17 #define CONFIG_DEFAULT_DEVICE_TREE	exynos4210-origen
18 
19 /* High Level Configuration Options */
20 #define CONFIG_EXYNOS4210		1	/* which is a EXYNOS4210 SoC */
21 #define CONFIG_ORIGEN			1	/* working with ORIGEN*/
22 
23 #define CONFIG_SYS_DCACHE_OFF		1
24 
25 /* ORIGEN has 4 bank of DRAM */
26 #define CONFIG_NR_DRAM_BANKS		4
27 #define CONFIG_SYS_SDRAM_BASE		0x40000000
28 #define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE
29 #define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */
30 
31 /* memtest works on */
32 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
33 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x6000000)
34 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
35 
36 #define CONFIG_SYS_TEXT_BASE		0x43E00000
37 
38 #define CONFIG_MACH_TYPE		MACH_TYPE_ORIGEN
39 
40 /* Size of malloc() pool */
41 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))
42 
43 /* select serial console configuration */
44 #define CONFIG_SERIAL2
45 #define CONFIG_BAUDRATE			115200
46 
47 /* Console configuration */
48 #define CONFIG_SYS_CONSOLE_INFO_QUIET
49 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
50 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
51 
52 #define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */
53 
54 #define CONFIG_SYS_MONITOR_BASE	0x00000000
55 
56 /* Power Down Modes */
57 #define S5P_CHECK_SLEEP			0x00000BAD
58 #define S5P_CHECK_DIDLE			0xBAD00000
59 #define S5P_CHECK_LPA			0xABAD0000
60 
61 #undef CONFIG_CMD_PING
62 #define CONFIG_CMD_ELF
63 #define CONFIG_CMD_DHCP
64 #undef CONFIG_CMD_NET
65 #undef CONFIG_CMD_NFS
66 
67 /* MMC SPL */
68 #define CONFIG_SPL
69 #define COPY_BL2_FNPTR_ADDR	0x02020030
70 #define CONFIG_SPL_TEXT_BASE	0x02021410
71 
72 #define CONFIG_BOOTCOMMAND	"fatload mmc 0 40007000 uImage; bootm 40007000"
73 
74 #define CONFIG_IDENT_STRING		" for ORIGEN"
75 
76 #define CONFIG_CLK_1000_400_200
77 
78 /* MIU (Memory Interleaving Unit) */
79 #define CONFIG_MIU_2BIT_21_7_INTERLEAVED
80 
81 #define CONFIG_ENV_IS_IN_MMC
82 #define CONFIG_SYS_MMC_ENV_DEV		0
83 #define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KB */
84 #define RESERVE_BLOCK_SIZE		(512)
85 #define BL1_SIZE			(16 << 10) /*16 K reserved for BL1*/
86 #define CONFIG_ENV_OFFSET		(RESERVE_BLOCK_SIZE + BL1_SIZE)
87 
88 #define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
89 #define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
90 
91 #define CONFIG_SYS_INIT_SP_ADDR		0x02040000
92 
93 /* U-boot copy size from boot Media to DRAM.*/
94 #define COPY_BL2_SIZE		0x80000
95 #define BL2_START_OFFSET	((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
96 #define BL2_SIZE_BLOC_COUNT	(COPY_BL2_SIZE/512)
97 
98 #endif	/* __CONFIG_H */
99