1 /* 2 * Copyright (C) 2011 Samsung Electronics 3 * 4 * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_ORIGEN_H 10 #define __CONFIG_ORIGEN_H 11 12 #include <configs/exynos4-common.h> 13 14 #define CONFIG_SYS_PROMPT "ORIGEN # " 15 16 17 /* High Level Configuration Options */ 18 #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ 19 #define CONFIG_ORIGEN 1 /* working with ORIGEN*/ 20 21 #define CONFIG_SYS_DCACHE_OFF 1 22 23 /* ORIGEN has 4 bank of DRAM */ 24 #define CONFIG_NR_DRAM_BANKS 4 25 #define CONFIG_SYS_SDRAM_BASE 0x40000000 26 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE 27 #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ 28 29 /* memtest works on */ 30 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 31 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) 32 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) 33 34 #define CONFIG_SYS_TEXT_BASE 0x43E00000 35 36 #define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN 37 38 /* select serial console configuration */ 39 #define CONFIG_SERIAL2 40 #define CONFIG_BAUDRATE 115200 41 42 /* Console configuration */ 43 #define CONFIG_SYS_CONSOLE_INFO_QUIET 44 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 45 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" 46 47 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ 48 49 #define CONFIG_SYS_MONITOR_BASE 0x00000000 50 51 /* Power Down Modes */ 52 #define S5P_CHECK_SLEEP 0x00000BAD 53 #define S5P_CHECK_DIDLE 0xBAD00000 54 #define S5P_CHECK_LPA 0xABAD0000 55 56 #undef CONFIG_CMD_PING 57 #define CONFIG_CMD_ELF 58 #define CONFIG_CMD_DHCP 59 #define CONFIG_CMD_EXT2 60 #define CONFIG_CMD_FS_GENERIC 61 #define CONFIG_CMD_BOOTZ 62 #define CONFIG_SUPPORT_RAW_INITRD 63 64 /* MMC SPL */ 65 #define COPY_BL2_FNPTR_ADDR 0x02020030 66 #define CONFIG_SPL_TEXT_BASE 0x02021410 67 68 #define CONFIG_EXTRA_ENV_SETTINGS \ 69 "loadaddr=0x40007000\0" \ 70 "rdaddr=0x48000000\0" \ 71 "kerneladdr=0x40007000\0" \ 72 "ramdiskaddr=0x48000000\0" \ 73 "console=ttySAC2,115200n8\0" \ 74 "mmcdev=0\0" \ 75 "bootenv=uEnv.txt\0" \ 76 "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ 77 "importbootenv=echo Importing environment from mmc ...; " \ 78 "env import -t $loadaddr $filesize\0" \ 79 "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 80 "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ 81 "source ${loadaddr}\0" 82 #define CONFIG_BOOTCOMMAND \ 83 "if mmc rescan; then " \ 84 "echo SD/MMC found on device ${mmcdev};" \ 85 "if run loadbootenv; then " \ 86 "echo Loaded environment from ${bootenv};" \ 87 "run importbootenv;" \ 88 "fi;" \ 89 "if test -n $uenvcmd; then " \ 90 "echo Running uenvcmd ...;" \ 91 "run uenvcmd;" \ 92 "fi;" \ 93 "if run loadbootscript; then " \ 94 "run bootscript; " \ 95 "fi; " \ 96 "fi;" \ 97 "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " 98 99 #define CONFIG_IDENT_STRING " for ORIGEN" 100 101 #define CONFIG_CLK_1000_400_200 102 103 /* MIU (Memory Interleaving Unit) */ 104 #define CONFIG_MIU_2BIT_21_7_INTERLEAVED 105 106 #define CONFIG_ENV_IS_IN_MMC 107 #define CONFIG_SYS_MMC_ENV_DEV 0 108 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ 109 #define RESERVE_BLOCK_SIZE (512) 110 #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ 111 #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) 112 113 #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" 114 #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) 115 116 #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 117 118 /* U-boot copy size from boot Media to DRAM.*/ 119 #define COPY_BL2_SIZE 0x80000 120 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) 121 #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) 122 123 #endif /* __CONFIG_H */ 124