xref: /openbmc/u-boot/include/configs/openrd.h (revision d891ab95)
1 /*
2  * (C) Copyright 2009
3  * Net Insight <www.netinsight.net>
4  * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
5  *
6  * Based on sheevaplug.h:
7  * (C) Copyright 2009
8  * Marvell Semiconductor <www.marvell.com>
9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10  *
11  * SPDX-License-Identifier:	GPL-2.0+
12  */
13 
14 #ifndef _CONFIG_OPENRD_H
15 #define _CONFIG_OPENRD_H
16 
17 /*
18  * High Level Configuration Options (easy to change)
19  */
20 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
21 #define CONFIG_KW88F6281	1	/* SOC Name */
22 #define CONFIG_MACH_OPENRD_BASE	/* Machine type */
23 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
24 
25 /*
26  * Commands configuration
27  */
28 #define CONFIG_SYS_MVFS
29 #define CONFIG_CMD_ENV
30 #define CONFIG_CMD_NAND
31 #define CONFIG_CMD_IDE
32 
33 /*
34  * mv-common.h should be defined after CMD configs since it used them
35  * to enable certain macros
36  */
37 #include "mv-common.h"
38 
39 /*
40  *  Environment variables configurations
41  */
42 #ifdef CONFIG_CMD_NAND
43 #define CONFIG_ENV_IS_IN_NAND		1
44 #define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
45 #else
46 #define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
47 #endif
48 /*
49  * max 4k env size is enough, but in case of nand
50  * it has to be rounded to sector size
51  */
52 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
53 #define CONFIG_ENV_ADDR			0x60000
54 #define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
55 /*
56  * Environment is right behind U-Boot in flash. Make sure U-Boot
57  * doesn't grow into the environment area.
58  */
59 #define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET
60 
61 /*
62  * Default environment variables
63  */
64 #define CONFIG_BOOTCOMMAND		"${x_bootcmd_kernel}; "	\
65 	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
66 	"${x_bootcmd_usb}; bootm 0x6400000;"
67 
68 #define MTDIDS_DEFAULT		"nand0=nand_mtd"
69 #define MTDPARTS_DEFAULT	"mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
70 	"0x400000@0x100000(uImage),"\
71 	"0x1fb00000@0x500000(rootfs)"
72 
73 #define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console"		\
74 	"=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"		\
75 	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"	\
76 	"x_bootcmd_usb=usb start\0"					\
77 	"x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"		\
78 	"mtdids="MTDIDS_DEFAULT"\0"					\
79 	"mtdparts="MTDPARTS_DEFAULT"\0"
80 
81 /*
82  * Ethernet Driver configuration
83  */
84 #ifdef CONFIG_CMD_NET
85 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
86 #  define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
87 # else
88 #  define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
89 # endif
90 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
91 #  define CONFIG_PHY_BASE_ADR	0x0
92 #  define PHY_NO		"88E1121"
93 # else
94 #  define CONFIG_PHY_BASE_ADR	0x8
95 #  define PHY_NO		"88E1116"
96 # endif
97 #endif /* CONFIG_CMD_NET */
98 
99 /*
100  * SATA Driver configuration
101  */
102 #ifdef CONFIG_MVSATA_IDE
103 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
104 #define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
105 #endif /*CONFIG_MVSATA_IDE*/
106 
107 #ifdef CONFIG_CMD_MMC
108 #define CONFIG_MVEBU_MMC
109 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
110 #endif /* CONFIG_CMD_MMC */
111 
112 #endif /* _CONFIG_OPENRD_BASE_H */
113