xref: /openbmc/u-boot/include/configs/openrd.h (revision a674313c)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2009
4  * Net Insight <www.netinsight.net>
5  * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
6  *
7  * Based on sheevaplug.h:
8  * (C) Copyright 2009
9  * Marvell Semiconductor <www.marvell.com>
10  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
11  */
12 
13 #ifndef _CONFIG_OPENRD_H
14 #define _CONFIG_OPENRD_H
15 
16 /*
17  * High Level Configuration Options (easy to change)
18  */
19 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
20 #define CONFIG_KW88F6281	1	/* SOC Name */
21 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
22 
23 /*
24  * Commands configuration
25  */
26 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
27 #define CONFIG_MTD_PARTITIONS
28 
29 /*
30  * mv-common.h should be defined after CMD configs since it used them
31  * to enable certain macros
32  */
33 #include "mv-common.h"
34 
35 /*
36  *  Environment variables configurations
37  */
38 #ifdef CONFIG_CMD_NAND
39 #define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
40 #endif
41 /*
42  * max 4k env size is enough, but in case of nand
43  * it has to be rounded to sector size
44  */
45 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
46 #define CONFIG_ENV_ADDR			0x60000
47 #define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
48 /*
49  * Environment is right behind U-Boot in flash. Make sure U-Boot
50  * doesn't grow into the environment area.
51  */
52 #define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET
53 
54 /*
55  * Default environment variables
56  */
57 #define CONFIG_BOOTCOMMAND		"${x_bootcmd_kernel}; "	\
58 	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
59 	"${x_bootcmd_usb}; bootm 0x6400000;"
60 
61 #define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console=ttyS0,115200 " \
62 	CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
63 	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"	\
64 	"x_bootcmd_usb=usb start\0"					\
65 	"x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"		\
66 	"mtdids="CONFIG_MTDIDS_DEFAULT"\0"					\
67 	"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
68 
69 /*
70  * Ethernet Driver configuration
71  */
72 #ifdef CONFIG_CMD_NET
73 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
74 #  define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
75 # else
76 #  define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
77 # endif
78 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
79 #  define CONFIG_PHY_BASE_ADR	0x0
80 #  define PHY_NO		"88E1121"
81 # else
82 #  define CONFIG_PHY_BASE_ADR	0x8
83 #  define PHY_NO		"88E1116"
84 # endif
85 #endif /* CONFIG_CMD_NET */
86 
87 /*
88  * SATA Driver configuration
89  */
90 #ifdef CONFIG_MVSATA_IDE
91 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
92 #define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
93 #endif /*CONFIG_MVSATA_IDE*/
94 
95 #ifdef CONFIG_CMD_MMC
96 #define CONFIG_MVEBU_MMC
97 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
98 #endif /* CONFIG_CMD_MMC */
99 
100 #endif /* _CONFIG_OPENRD_BASE_H */
101