1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2009 4 * Net Insight <www.netinsight.net> 5 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> 6 * 7 * Based on sheevaplug.h: 8 * (C) Copyright 2009 9 * Marvell Semiconductor <www.marvell.com> 10 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 11 */ 12 13 #ifndef _CONFIG_OPENRD_H 14 #define _CONFIG_OPENRD_H 15 16 /* 17 * High Level Configuration Options (easy to change) 18 */ 19 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 20 #define CONFIG_KW88F6281 1 /* SOC Name */ 21 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 22 23 /* 24 * Commands configuration 25 */ 26 27 /* 28 * mv-common.h should be defined after CMD configs since it used them 29 * to enable certain macros 30 */ 31 #include "mv-common.h" 32 33 /* 34 * Environment variables configurations 35 */ 36 #ifdef CONFIG_CMD_NAND 37 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 38 #endif 39 /* 40 * max 4k env size is enough, but in case of nand 41 * it has to be rounded to sector size 42 */ 43 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 44 #define CONFIG_ENV_ADDR 0x60000 45 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 46 /* 47 * Environment is right behind U-Boot in flash. Make sure U-Boot 48 * doesn't grow into the environment area. 49 */ 50 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET 51 52 /* 53 * Default environment variables 54 */ 55 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 56 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 57 "${x_bootcmd_usb}; bootm 0x6400000;" 58 59 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \ 60 CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ 61 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 62 "x_bootcmd_usb=usb start\0" \ 63 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" 64 65 /* 66 * Ethernet Driver configuration 67 */ 68 #ifdef CONFIG_CMD_NET 69 # ifdef CONFIG_BOARD_IS_OPENRD_BASE 70 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 71 # else 72 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 73 # endif 74 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE 75 # define CONFIG_PHY_BASE_ADR 0x0 76 # define PHY_NO "88E1121" 77 # else 78 # define CONFIG_PHY_BASE_ADR 0x8 79 # define PHY_NO "88E1116" 80 # endif 81 #endif /* CONFIG_CMD_NET */ 82 83 /* 84 * SATA Driver configuration 85 */ 86 #ifdef CONFIG_MVSATA_IDE 87 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 88 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 89 #endif /*CONFIG_MVSATA_IDE*/ 90 91 #ifdef CONFIG_CMD_MMC 92 #define CONFIG_MVEBU_MMC 93 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 94 #endif /* CONFIG_CMD_MMC */ 95 96 #endif /* _CONFIG_OPENRD_BASE_H */ 97