1 /* 2 * (C) Copyright 2009 3 * Net Insight <www.netinsight.net> 4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> 5 * 6 * Based on sheevaplug.h: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef _CONFIG_OPENRD_H 15 #define _CONFIG_OPENRD_H 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 21 #define CONFIG_KW88F6281 1 /* SOC Name */ 22 #define CONFIG_MACH_OPENRD_BASE /* Machine type */ 23 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 24 25 /* 26 * Commands configuration 27 */ 28 #define CONFIG_SYS_MVFS 29 #define CONFIG_CMD_NAND 30 31 /* 32 * mv-common.h should be defined after CMD configs since it used them 33 * to enable certain macros 34 */ 35 #include "mv-common.h" 36 37 /* 38 * Environment variables configurations 39 */ 40 #ifdef CONFIG_CMD_NAND 41 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 42 #endif 43 /* 44 * max 4k env size is enough, but in case of nand 45 * it has to be rounded to sector size 46 */ 47 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 48 #define CONFIG_ENV_ADDR 0x60000 49 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 50 /* 51 * Environment is right behind U-Boot in flash. Make sure U-Boot 52 * doesn't grow into the environment area. 53 */ 54 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET 55 56 /* 57 * Default environment variables 58 */ 59 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 60 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 61 "${x_bootcmd_usb}; bootm 0x6400000;" 62 63 #define MTDIDS_DEFAULT "nand0=nand_mtd" 64 #define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\ 65 "0x400000@0x100000(uImage),"\ 66 "0x1fb00000@0x500000(rootfs)" 67 68 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 69 "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ 70 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 71 "x_bootcmd_usb=usb start\0" \ 72 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ 73 "mtdids="MTDIDS_DEFAULT"\0" \ 74 "mtdparts="MTDPARTS_DEFAULT"\0" 75 76 /* 77 * Ethernet Driver configuration 78 */ 79 #ifdef CONFIG_CMD_NET 80 # ifdef CONFIG_BOARD_IS_OPENRD_BASE 81 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 82 # else 83 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 84 # endif 85 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE 86 # define CONFIG_PHY_BASE_ADR 0x0 87 # define PHY_NO "88E1121" 88 # else 89 # define CONFIG_PHY_BASE_ADR 0x8 90 # define PHY_NO "88E1116" 91 # endif 92 #endif /* CONFIG_CMD_NET */ 93 94 /* 95 * SATA Driver configuration 96 */ 97 #ifdef CONFIG_MVSATA_IDE 98 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 99 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 100 #endif /*CONFIG_MVSATA_IDE*/ 101 102 #ifdef CONFIG_CMD_MMC 103 #define CONFIG_MVEBU_MMC 104 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 105 #endif /* CONFIG_CMD_MMC */ 106 107 #endif /* _CONFIG_OPENRD_BASE_H */ 108