1 /* 2 * (C) Copyright 2009 3 * Net Insight <www.netinsight.net> 4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> 5 * 6 * Based on sheevaplug.h: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef _CONFIG_OPENRD_H 15 #define _CONFIG_OPENRD_H 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 21 #define CONFIG_KW88F6281 1 /* SOC Name */ 22 #define CONFIG_MACH_OPENRD_BASE /* Machine type */ 23 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 24 25 /* 26 * Commands configuration 27 */ 28 #define CONFIG_SYS_MVFS 29 30 /* 31 * mv-common.h should be defined after CMD configs since it used them 32 * to enable certain macros 33 */ 34 #include "mv-common.h" 35 36 /* 37 * Environment variables configurations 38 */ 39 #ifdef CONFIG_CMD_NAND 40 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 41 #endif 42 /* 43 * max 4k env size is enough, but in case of nand 44 * it has to be rounded to sector size 45 */ 46 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 47 #define CONFIG_ENV_ADDR 0x60000 48 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 49 /* 50 * Environment is right behind U-Boot in flash. Make sure U-Boot 51 * doesn't grow into the environment area. 52 */ 53 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET 54 55 /* 56 * Default environment variables 57 */ 58 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 59 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 60 "${x_bootcmd_usb}; bootm 0x6400000;" 61 62 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \ 63 CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ 64 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 65 "x_bootcmd_usb=usb start\0" \ 66 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ 67 "mtdids="CONFIG_MTDIDS_DEFAULT"\0" \ 68 "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" 69 70 /* 71 * Ethernet Driver configuration 72 */ 73 #ifdef CONFIG_CMD_NET 74 # ifdef CONFIG_BOARD_IS_OPENRD_BASE 75 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 76 # else 77 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 78 # endif 79 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE 80 # define CONFIG_PHY_BASE_ADR 0x0 81 # define PHY_NO "88E1121" 82 # else 83 # define CONFIG_PHY_BASE_ADR 0x8 84 # define PHY_NO "88E1116" 85 # endif 86 #endif /* CONFIG_CMD_NET */ 87 88 /* 89 * SATA Driver configuration 90 */ 91 #ifdef CONFIG_MVSATA_IDE 92 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 93 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 94 #endif /*CONFIG_MVSATA_IDE*/ 95 96 #ifdef CONFIG_CMD_MMC 97 #define CONFIG_MVEBU_MMC 98 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 99 #endif /* CONFIG_CMD_MMC */ 100 101 #endif /* _CONFIG_OPENRD_BASE_H */ 102