1 /* 2 * (C) Copyright 2009 3 * Net Insight <www.netinsight.net> 4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> 5 * 6 * Based on sheevaplug.h: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef _CONFIG_OPENRD_H 15 #define _CONFIG_OPENRD_H 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 21 #define CONFIG_KW88F6281 1 /* SOC Name */ 22 #define CONFIG_MACH_OPENRD_BASE /* Machine type */ 23 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 24 #define CONFIG_SYS_THUMB_BUILD 25 26 /* 27 * Commands configuration 28 */ 29 #define CONFIG_SYS_MVFS 30 #define CONFIG_CMD_ENV 31 #define CONFIG_CMD_NAND 32 #define CONFIG_CMD_IDE 33 34 /* 35 * mv-common.h should be defined after CMD configs since it used them 36 * to enable certain macros 37 */ 38 #include "mv-common.h" 39 40 /* 41 * Environment variables configurations 42 */ 43 #ifdef CONFIG_CMD_NAND 44 #define CONFIG_ENV_IS_IN_NAND 1 45 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 46 #else 47 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 48 #endif 49 /* 50 * max 4k env size is enough, but in case of nand 51 * it has to be rounded to sector size 52 */ 53 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 54 #define CONFIG_ENV_ADDR 0x60000 55 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 56 /* 57 * Environment is right behind U-Boot in flash. Make sure U-Boot 58 * doesn't grow into the environment area. 59 */ 60 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET 61 62 /* 63 * Default environment variables 64 */ 65 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 66 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 67 "${x_bootcmd_usb}; bootm 0x6400000;" 68 69 #define MTDIDS_DEFAULT "nand0=nand_mtd" 70 #define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\ 71 "0x400000@0x100000(uImage),"\ 72 "0x1fb00000@0x500000(rootfs)" 73 74 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 75 "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ 76 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 77 "x_bootcmd_usb=usb start\0" \ 78 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ 79 "mtdids="MTDIDS_DEFAULT"\0" \ 80 "mtdparts="MTDPARTS_DEFAULT"\0" 81 82 /* 83 * Ethernet Driver configuration 84 */ 85 #ifdef CONFIG_CMD_NET 86 # ifdef CONFIG_BOARD_IS_OPENRD_BASE 87 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 88 # else 89 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 90 # endif 91 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE 92 # define CONFIG_PHY_BASE_ADR 0x0 93 # define PHY_NO "88E1121" 94 # else 95 # define CONFIG_PHY_BASE_ADR 0x8 96 # define PHY_NO "88E1116" 97 # endif 98 #endif /* CONFIG_CMD_NET */ 99 100 /* 101 * SATA Driver configuration 102 */ 103 #ifdef CONFIG_MVSATA_IDE 104 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 105 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 106 #endif /*CONFIG_MVSATA_IDE*/ 107 108 #ifdef CONFIG_CMD_MMC 109 #define CONFIG_MVEBU_MMC 110 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 111 #endif /* CONFIG_CMD_MMC */ 112 113 #endif /* _CONFIG_OPENRD_BASE_H */ 114