1 /* 2 * (C) Copyright 2009 3 * Net Insight <www.netinsight.net> 4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> 5 * 6 * Based on sheevaplug.h: 7 * (C) Copyright 2009 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef _CONFIG_OPENRD_H 15 #define _CONFIG_OPENRD_H 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 21 #define CONFIG_KW88F6281 1 /* SOC Name */ 22 #define CONFIG_MACH_OPENRD_BASE /* Machine type */ 23 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 24 25 /* 26 * Commands configuration 27 */ 28 #define CONFIG_SYS_MVFS 29 #define CONFIG_CMD_ENV 30 #define CONFIG_CMD_NAND 31 #define CONFIG_CMD_IDE 32 33 /* 34 * mv-common.h should be defined after CMD configs since it used them 35 * to enable certain macros 36 */ 37 #include "mv-common.h" 38 39 /* 40 * Environment variables configurations 41 */ 42 #ifdef CONFIG_CMD_NAND 43 #define CONFIG_ENV_IS_IN_NAND 1 44 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 45 #else 46 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 47 #endif 48 /* 49 * max 4k env size is enough, but in case of nand 50 * it has to be rounded to sector size 51 */ 52 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 53 #define CONFIG_ENV_ADDR 0x60000 54 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 55 /* 56 * Environment is right behind U-Boot in flash. Make sure U-Boot 57 * doesn't grow into the environment area. 58 */ 59 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET 60 61 /* 62 * Default environment variables 63 */ 64 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ 65 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 66 "${x_bootcmd_usb}; bootm 0x6400000;" 67 68 #define MTDIDS_DEFAULT "nand0=nand_mtd" 69 #define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\ 70 "0x400000@0x100000(uImage),"\ 71 "0x1fb00000@0x500000(rootfs)" 72 73 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ 74 "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ 75 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ 76 "x_bootcmd_usb=usb start\0" \ 77 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ 78 "mtdids="MTDIDS_DEFAULT"\0" \ 79 "mtdparts="MTDPARTS_DEFAULT"\0" 80 81 /* 82 * Ethernet Driver configuration 83 */ 84 #ifdef CONFIG_CMD_NET 85 # ifdef CONFIG_BOARD_IS_OPENRD_BASE 86 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 87 # else 88 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 89 # endif 90 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE 91 # define CONFIG_PHY_BASE_ADR 0x0 92 # define PHY_NO "88E1121" 93 # else 94 # define CONFIG_PHY_BASE_ADR 0x8 95 # define PHY_NO "88E1116" 96 # endif 97 #endif /* CONFIG_CMD_NET */ 98 99 /* 100 * SATA Driver configuration 101 */ 102 #ifdef CONFIG_MVSATA_IDE 103 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 104 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 105 #endif /*CONFIG_MVSATA_IDE*/ 106 107 #ifdef CONFIG_CMD_MMC 108 #define CONFIG_MVEBU_MMC 109 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE 110 #endif /* CONFIG_CMD_MMC */ 111 112 #endif /* _CONFIG_OPENRD_BASE_H */ 113