1 /*
2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * Based on davinci_dvevm.h. Original Copyrights follow:
5  *
6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21  */
22 
23 #ifndef __CONFIG_H
24 #define __CONFIG_H
25 
26 /*
27  * Board
28  */
29 #define CONFIG_DRIVER_TI_EMAC
30 #undef CONFIG_USE_SPIFLASH
31 #undef	CONFIG_SYS_USE_NOR
32 #define	CONFIG_USE_NAND
33 
34 /*
35  * SoC Configuration
36  */
37 #define CONFIG_MACH_OMAPL138_LCDK
38 #define CONFIG_ARM926EJS		/* arm926ejs CPU core */
39 #define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
40 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
41 #define CONFIG_SYS_OSCIN_FREQ		24000000
42 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
43 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
44 #define CONFIG_SYS_HZ			1000
45 #define CONFIG_SKIP_LOWLEVEL_INIT
46 #define CONFIG_SYS_TEXT_BASE		0xc1080000
47 
48 /*
49  * Memory Info
50  */
51 #define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
52 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
53 #define PHYS_SDRAM_1_SIZE	(128 << 20) /* SDRAM size 128MB */
54 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
55 
56 /* memtest start addr */
57 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
58 
59 /* memtest will be run on 16MB */
60 #define CONFIG_SYS_MEMTEST_END 	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
61 
62 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
63 #define CONFIG_STACKSIZE	(256*1024) /* regular stack */
64 
65 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (	\
66 	DAVINCI_SYSCFG_SUSPSRC_TIMER0 |		\
67 	DAVINCI_SYSCFG_SUSPSRC_SPI1 |		\
68 	DAVINCI_SYSCFG_SUSPSRC_UART2 |		\
69 	DAVINCI_SYSCFG_SUSPSRC_EMAC |		\
70 	DAVINCI_SYSCFG_SUSPSRC_I2C)
71 
72 /*
73  * PLL configuration
74  */
75 #define CONFIG_SYS_DV_CLKMODE          0
76 #define CONFIG_SYS_DA850_PLL0_POSTDIV  1
77 #define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
78 #define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
79 #define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
80 #define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
81 #define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
82 #define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
83 #define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
84 
85 #define CONFIG_SYS_DA850_PLL1_POSTDIV  1
86 #define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
87 #define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
88 #define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8003
89 
90 #define CONFIG_SYS_DA850_PLL0_PLLM     24
91 #define CONFIG_SYS_DA850_PLL1_PLLM     21
92 
93 /*
94  * Serial Driver info
95  */
96 #define CONFIG_SYS_NS16550_SERIAL
97 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
98 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
99 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
100 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
101 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
102 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
103 
104 #define CONFIG_SPI
105 #define CONFIG_DAVINCI_SPI
106 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
107 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
108 #define CONFIG_SF_DEFAULT_SPEED		30000000
109 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
110 
111 #ifdef CONFIG_USE_SPIFLASH
112 #define CONFIG_SPL_SPI_SUPPORT
113 #define CONFIG_SPL_SPI_FLASH_SUPPORT
114 #define CONFIG_SPL_SPI_LOAD
115 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
116 #define CONFIG_SYS_SPI_U_BOOT_SIZE	0x30000
117 #endif
118 
119 /*
120  * I2C Configuration
121  */
122 #define CONFIG_SYS_I2C
123 #define CONFIG_SYS_I2C_DAVINCI
124 #define CONFIG_SYS_DAVINCI_I2C_SPEED	25000
125 #define CONFIG_SYS_DAVINCI_I2C_SLAVE	10 /* Bogus, master-only in U-Boot */
126 #define CONFIG_SYS_I2C_EXPANDER_ADDR	0x20
127 
128 /*
129  * Flash & Environment
130  */
131 #ifdef CONFIG_USE_NAND
132 #undef CONFIG_ENV_IS_IN_FLASH
133 #define CONFIG_NAND_DAVINCI
134 #define CONFIG_SYS_NO_FLASH
135 #define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
136 #define CONFIG_ENV_OFFSET		0x0 /* Block 0--not used by bootcode */
137 #define CONFIG_ENV_SIZE			(128 << 9)
138 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
139 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
140 #define	CONFIG_SYS_NAND_PAGE_2K
141 #define	CONFIG_SYS_NAND_BUSWIDTH_16_BIT
142 #define CONFIG_SYS_NAND_CS		3
143 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
144 #define CONFIG_SYS_CLE_MASK		0x10
145 #define CONFIG_SYS_ALE_MASK		0x8
146 #undef CONFIG_SYS_NAND_HW_ECC
147 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
148 #define NAND_MAX_CHIPS			1
149 #endif
150 
151 #ifdef CONFIG_SYS_USE_NOR
152 #define CONFIG_ENV_IS_IN_FLASH
153 #undef CONFIG_SYS_NO_FLASH
154 #define CONFIG_FLASH_CFI_DRIVER
155 #define CONFIG_SYS_FLASH_CFI
156 #define CONFIG_SYS_FLASH_PROTECTION
157 #define CONFIG_SYS_MAX_FLASH_BANKS	1 /* max number of flash banks */
158 #define CONFIG_SYS_FLASH_SECT_SZ	(128 << 10) /* 128KB */
159 #define CONFIG_ENV_OFFSET		(CONFIG_SYS_FLASH_SECT_SZ * 3)
160 #define CONFIG_ENV_SIZE			(128 << 10)
161 #define CONFIG_SYS_FLASH_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
162 #define PHYS_FLASH_SIZE			(8 << 20) /* Flash size 8MB */
163 #define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
164 	       + 3)
165 #define CONFIG_ENV_SECT_SIZE		CONFIG_SYS_FLASH_SECT_SZ
166 #endif
167 
168 #ifdef CONFIG_USE_SPIFLASH
169 #undef CONFIG_ENV_IS_IN_FLASH
170 #undef CONFIG_ENV_IS_IN_NAND
171 #define CONFIG_ENV_IS_IN_SPI_FLASH
172 #define CONFIG_ENV_SIZE			(64 << 10)
173 #define CONFIG_ENV_OFFSET		(256 << 10)
174 #define CONFIG_ENV_SECT_SIZE		(64 << 10)
175 #define CONFIG_SYS_NO_FLASH
176 #endif
177 
178 /*
179  * Network & Ethernet Configuration
180  */
181 #ifdef CONFIG_DRIVER_TI_EMAC
182 #define CONFIG_EMAC_MDIO_PHY_NUM	7
183 #define CONFIG_MII
184 #undef	CONFIG_DRIVER_TI_EMAC_USE_RMII
185 #define CONFIG_BOOTP_DEFAULT
186 #define CONFIG_BOOTP_DNS
187 #define CONFIG_BOOTP_DNS2
188 #define CONFIG_BOOTP_SEND_HOSTNAME
189 #define CONFIG_NET_RETRY_COUNT	10
190 #endif
191 
192 /*
193  * U-Boot general configuration
194  */
195 #define CONFIG_MISC_INIT_R
196 #define CONFIG_BOARD_EARLY_INIT_F
197 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
198 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
199 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
200 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
201 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
202 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
203 #define CONFIG_VERSION_VARIABLE
204 #define CONFIG_AUTO_COMPLETE
205 #define CONFIG_SYS_HUSH_PARSER
206 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
207 #define CONFIG_CMDLINE_EDITING
208 #define CONFIG_SYS_LONGHELP
209 #define CONFIG_CRC32_VERIFY
210 #define CONFIG_MX_CYCLIC
211 #define CONFIG_OF_LIBFDT
212 
213 /*
214  * Linux Information
215  */
216 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
217 #define CONFIG_CMDLINE_TAG
218 #define CONFIG_REVISION_TAG
219 #define CONFIG_SETUP_MEMORY_TAGS
220 #define CONFIG_BOOTARGS		"console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=off"
221 #define CONFIG_BOOTCOMMAND	"if mmc rescan 0; then if fatload mmc 0 0xc0600000 boot.scr; then source 0xc0600000; else fatload mmc 0 0xc0700000 uImage; bootm c0700000; fi; else sf probe 0; sf read 0xc0700000 0x80000 0x220000; bootm 0xc0700000; fi"
222 #define CONFIG_BOOTDELAY	3
223 
224 /*
225  * U-Boot commands
226  */
227 #define CONFIG_CMD_ENV
228 #define CONFIG_CMD_ASKENV
229 #define CONFIG_CMD_DHCP
230 #define CONFIG_CMD_DIAG
231 #define CONFIG_CMD_MII
232 #define CONFIG_CMD_PING
233 #define CONFIG_CMD_SAVES
234 #ifdef CONFIG_CMD_BDI
235 #define CONFIG_CLOCKS
236 #endif
237 
238 #ifndef CONFIG_DRIVER_TI_EMAC
239 #undef CONFIG_CMD_DHCP
240 #undef CONFIG_CMD_MII
241 #undef CONFIG_CMD_PING
242 #endif
243 
244 #ifdef CONFIG_USE_NAND
245 #define CONFIG_CMD_NAND
246 
247 #define CONFIG_CMD_MTDPARTS
248 #define CONFIG_MTD_DEVICE
249 #define CONFIG_MTD_PARTITIONS
250 #define CONFIG_LZO
251 #define CONFIG_RBTREE
252 #define CONFIG_CMD_UBI
253 #define CONFIG_CMD_UBIFS
254 #endif
255 
256 #ifdef CONFIG_USE_SPIFLASH
257 #define CONFIG_CMD_SPI
258 #define CONFIG_CMD_SF
259 #endif
260 
261 #if !defined(CONFIG_USE_NAND) && \
262 	!defined(CONFIG_SYS_USE_NOR) && \
263 	!defined(CONFIG_USE_SPIFLASH)
264 #define CONFIG_ENV_IS_NOWHERE
265 #define CONFIG_SYS_NO_FLASH
266 #define CONFIG_ENV_SIZE		(16 << 10)
267 #undef CONFIG_CMD_ENV
268 #endif
269 
270 /* SD/MMC */
271 #define CONFIG_MMC
272 #define CONFIG_GENERIC_MMC
273 #define CONFIG_DAVINCI_MMC
274 
275 #ifdef CONFIG_MMC
276 #define CONFIG_DOS_PARTITION
277 #define CONFIG_CMD_EXT2
278 #define CONFIG_CMD_FAT
279 #define CONFIG_CMD_MMC
280 #undef CONFIG_ENV_IS_IN_MMC
281 #endif
282 
283 #ifdef CONFIG_ENV_IS_IN_MMC
284 #undef CONFIG_ENV_SIZE
285 #undef CONFIG_ENV_OFFSET
286 #define CONFIG_ENV_SIZE		(16 << 10)	/* 16 KiB */
287 #define CONFIG_ENV_OFFSET	(51 << 9)	/* Sector 51 */
288 #undef CONFIG_ENV_IS_IN_FLASH
289 #undef CONFIG_ENV_IS_IN_NAND
290 #undef CONFIG_ENV_IS_IN_SPI_FLASH
291 #endif
292 
293 #ifndef CONFIG_DIRECT_NOR_BOOT
294 /* defines for SPL */
295 #define CONFIG_SPL_FRAMEWORK
296 #define CONFIG_SPL_BOARD_INIT
297 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
298 						CONFIG_SYS_MALLOC_LEN)
299 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
300 #define CONFIG_SPL_SERIAL_SUPPORT
301 #define CONFIG_SPL_LIBCOMMON_SUPPORT
302 #define CONFIG_SPL_LIBGENERIC_SUPPORT
303 #define CONFIG_SPL_LDSCRIPT	"board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
304 #define CONFIG_SPL_STACK	0x8001ff00
305 #define CONFIG_SPL_TEXT_BASE	0x80000000
306 #define CONFIG_SPL_MAX_FOOTPRINT	32768
307 #define CONFIG_SPL_PAD_TO	32768
308 #endif
309 
310 /* additions for new relocation code, must added to all boards */
311 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
312 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
313 					GENERATED_GBL_DATA_SIZE)
314 #endif /* __CONFIG_H */
315