1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Sricharan R <r.sricharan@ti.com> 5 * 6 * Configuration settings for the TI EVM5430 board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_OMAP5_EVM_H 13 #define __CONFIG_OMAP5_EVM_H 14 15 #include <environment/ti/dfu.h> 16 17 #ifndef CONFIG_SPL_BUILD 18 /* Define the default GPT table for eMMC */ 19 #define PARTS_DEFAULT \ 20 "uuid_disk=${uuid_gpt_disk};" \ 21 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" 22 #endif 23 24 #define DFUARGS \ 25 "dfu_bufsiz=0x10000\0" \ 26 DFU_ALT_INFO_MMC \ 27 DFU_ALT_INFO_EMMC \ 28 DFU_ALT_INFO_RAM 29 30 #include <configs/ti_omap5_common.h> 31 32 #define CONFIG_SYS_NS16550_COM3 UART3_BASE 33 34 #define CONFIG_MISC_INIT_R 35 /* MMC ENV related defines */ 36 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ 37 #define CONFIG_ENV_SIZE (128 << 10) 38 #define CONFIG_ENV_OFFSET 0x260000 39 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 40 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 41 42 /* Enhance our eMMC support / experience. */ 43 #define CONFIG_HSMMC2_8BIT 44 #define CONFIG_SUPPORT_EMMC_BOOT 45 46 /* Required support for the TCA642X GPIO we have on the uEVM */ 47 #define CONFIG_TCA642X 48 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 49 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 50 51 /* USB UHH support options */ 52 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 53 54 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 55 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 56 57 /* Enabled commands */ 58 59 /* USB Networking options */ 60 61 #define CONSOLEDEV "ttyO2" 62 63 #define CONFIG_SCSI_AHCI_PLAT 64 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 65 #define CONFIG_SYS_SCSI_MAX_LUN 1 66 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 67 CONFIG_SYS_SCSI_MAX_LUN) 68 69 #endif /* __CONFIG_OMAP5_EVM_H */ 70