1 /* 2 * (C) Copyright 2013 3 * Texas Instruments Incorporated. 4 * Sricharan R <r.sricharan@ti.com> 5 * 6 * Configuration settings for the TI EVM5430 board. 7 * See ti_omap5_common.h for omap5 common settings. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_OMAP5_EVM_H 13 #define __CONFIG_OMAP5_EVM_H 14 15 #ifndef CONFIG_SPL_BUILD 16 /* Define the default GPT table for eMMC */ 17 #define PARTS_DEFAULT \ 18 "uuid_disk=${uuid_gpt_disk};" \ 19 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" 20 #endif 21 22 #define DFU_ALT_INFO_MMC \ 23 "dfu_alt_info_mmc=" \ 24 "boot part 0 1;" \ 25 "rootfs part 0 2;" \ 26 "MLO fat 0 1;" \ 27 "MLO.raw raw 0x100 0x100;" \ 28 "u-boot.img.raw raw 0x300 0x400;" \ 29 "spl-os-args.raw raw 0x80 0x80;" \ 30 "spl-os-image.raw raw 0x900 0x2000;" \ 31 "spl-os-args fat 0 1;" \ 32 "spl-os-image fat 0 1;" \ 33 "u-boot.img fat 0 1;" \ 34 "uEnv.txt fat 0 1\0" 35 36 #define DFU_ALT_INFO_EMMC \ 37 "dfu_alt_info_emmc=" \ 38 "rawemmc raw 0 3751936;" \ 39 "boot part 1 1;" \ 40 "rootfs part 1 2;" \ 41 "MLO fat 1 1;" \ 42 "MLO.raw raw 0x100 0x100;" \ 43 "u-boot.img.raw raw 0x300 0x400;" \ 44 "spl-os-args.raw raw 0x80 0x80;" \ 45 "spl-os-image.raw raw 0x900 0x2000;" \ 46 "spl-os-args fat 1 1;" \ 47 "spl-os-image fat 1 1;" \ 48 "u-boot.img fat 1 1;" \ 49 "uEnv.txt fat 1 1\0" 50 51 #define DFU_ALT_INFO_RAM \ 52 "dfu_alt_info_ram=" \ 53 "kernel ram 0x80200000 0x4000000;" \ 54 "fdt ram 0x80f80000 0x80000;" \ 55 "ramdisk ram 0x81000000 0x4000000\0" 56 57 #define DFUARGS \ 58 "dfu_bufsiz=0x10000\0" \ 59 DFU_ALT_INFO_MMC \ 60 DFU_ALT_INFO_EMMC \ 61 DFU_ALT_INFO_RAM 62 63 #include <configs/ti_omap5_common.h> 64 65 #define CONFIG_CONS_INDEX 3 66 #define CONFIG_SYS_NS16550_COM3 UART3_BASE 67 #define CONFIG_BAUDRATE 115200 68 69 #define CONFIG_MISC_INIT_R 70 /* MMC ENV related defines */ 71 #define CONFIG_ENV_IS_IN_MMC 72 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ 73 #define CONFIG_ENV_SIZE (128 << 10) 74 #define CONFIG_ENV_OFFSET 0xE0000 75 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 76 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 77 78 /* Enhance our eMMC support / experience. */ 79 #define CONFIG_CMD_GPT 80 #define CONFIG_EFI_PARTITION 81 #define CONFIG_HSMMC2_8BIT 82 #define CONFIG_SUPPORT_EMMC_BOOT 83 84 /* Required support for the TCA642X GPIO we have on the uEVM */ 85 #define CONFIG_TCA642X 86 #define CONFIG_CMD_TCA642X 87 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 88 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 89 90 /* USB UHH support options */ 91 #define CONFIG_USB_HOST 92 #define CONFIG_USB_EHCI 93 #define CONFIG_USB_EHCI_OMAP 94 #define CONFIG_USB_STORAGE 95 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 96 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 97 98 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 99 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 100 101 /* USB Device Firmware Update support */ 102 #define CONFIG_USB_FUNCTION_DFU 103 #define CONFIG_DFU_RAM 104 105 #define CONFIG_DFU_MMC 106 107 /* Enabled commands */ 108 109 /* USB Networking options */ 110 #define CONFIG_USB_HOST_ETHER 111 #define CONFIG_USB_ETHER_SMSC95XX 112 113 #define CONSOLEDEV "ttyO2" 114 115 /* Max time to hold reset on this board, see doc/README.omap-reset-time */ 116 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 117 118 #define CONFIG_SCSI 119 #define CONFIG_LIBATA 120 #define CONFIG_SCSI_AHCI 121 #define CONFIG_SCSI_AHCI_PLAT 122 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 123 #define CONFIG_SYS_SCSI_MAX_LUN 1 124 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 125 CONFIG_SYS_SCSI_MAX_LUN) 126 127 #endif /* __CONFIG_OMAP5_EVM_H */ 128