1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * Nishanth Menon <nm@ti.com> 7 * 8 * Configuration settings for the TI OMAP3430 Zoom MDK board. 9 * 10 * See file CREDITS for list of people who contributed to this 11 * project. 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License as 15 * published by the Free Software Foundation; either version 2 of 16 * the License, or (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 26 * MA 02111-1307 USA 27 */ 28 29 #ifndef __CONFIG_H 30 #define __CONFIG_H 31 32 /* 33 * High Level Configuration Options 34 */ 35 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 36 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 37 #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ 38 39 #define CONFIG_SDRC /* The chip has SDRC controller */ 40 41 #include <asm/arch/cpu.h> /* get chip and board defs */ 42 #include <asm/arch/omap3.h> 43 44 /* 45 * Display CPU and Board information 46 */ 47 #define CONFIG_DISPLAY_CPUINFO 1 48 #define CONFIG_DISPLAY_BOARDINFO 1 49 50 /* Clock Defines */ 51 #define V_OSCK 26000000 /* Clock output from T2 */ 52 #define V_SCLK (V_OSCK >> 1) 53 54 #define CONFIG_MISC_INIT_R 55 56 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 57 #define CONFIG_SETUP_MEMORY_TAGS 1 58 #define CONFIG_INITRD_TAG 1 59 #define CONFIG_REVISION_TAG 1 60 61 #define CONFIG_OF_LIBFDT 1 62 63 /* 64 * Size of malloc() pool 65 */ 66 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 67 /* Sector */ 68 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 69 70 /* 71 * Hardware drivers 72 */ 73 74 /* 75 * NS16550 Configuration 76 */ 77 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 78 79 #define CONFIG_SYS_NS16550 80 #define CONFIG_SYS_NS16550_SERIAL 81 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 82 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 83 84 /* 85 * select serial console configuration 86 */ 87 #define CONFIG_CONS_INDEX 3 88 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 89 #define CONFIG_SERIAL3 3 /* UART3 */ 90 91 /* allow to overwrite serial and ethaddr */ 92 #define CONFIG_ENV_OVERWRITE 93 #define CONFIG_BAUDRATE 115200 94 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 95 115200} 96 #define CONFIG_GENERIC_MMC 1 97 #define CONFIG_MMC 1 98 #define CONFIG_OMAP_HSMMC 1 99 #define CONFIG_DOS_PARTITION 1 100 101 /* USB */ 102 #define CONFIG_MUSB_UDC 1 103 #define CONFIG_USB_OMAP3 1 104 #define CONFIG_TWL4030_USB 1 105 106 /* USB device configuration */ 107 #define CONFIG_USB_DEVICE 1 108 #define CONFIG_USB_TTY 1 109 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 110 /* Change these to suit your needs */ 111 #define CONFIG_USBD_VENDORID 0x0451 112 #define CONFIG_USBD_PRODUCTID 0x5678 113 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 114 #define CONFIG_USBD_PRODUCT_NAME "Zoom1" 115 116 /* commands to include */ 117 #include <config_cmd_default.h> 118 119 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 120 #define CONFIG_CMD_FAT /* FAT support */ 121 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 122 123 #define CONFIG_CMD_I2C /* I2C serial bus support */ 124 #define CONFIG_CMD_MMC /* MMC support */ 125 #define CONFIG_CMD_NAND /* NAND support */ 126 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ 127 128 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 129 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 130 #undef CONFIG_CMD_IMI /* iminfo */ 131 #undef CONFIG_CMD_IMLS /* List all found images */ 132 #undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 133 #undef CONFIG_CMD_NFS /* NFS support */ 134 135 #define CONFIG_SYS_NO_FLASH 136 #define CONFIG_HARD_I2C 1 137 #define CONFIG_SYS_I2C_SPEED 100000 138 #define CONFIG_SYS_I2C_SLAVE 1 139 #define CONFIG_SYS_I2C_BUS 0 140 #define CONFIG_SYS_I2C_BUS_SELECT 1 141 #define CONFIG_DRIVER_OMAP34XX_I2C 1 142 143 /* 144 * TWL4030 145 */ 146 #define CONFIG_TWL4030_POWER 1 147 #define CONFIG_TWL4030_LED 1 148 149 /* 150 * Board NAND Info. 151 */ 152 #define CONFIG_NAND_OMAP_GPMC 153 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 154 /* to access nand */ 155 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 156 /* to access nand at */ 157 /* CS0 */ 158 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 159 160 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 161 /* devices */ 162 #define CONFIG_JFFS2_NAND 163 /* nand device jffs2 lives on */ 164 #define CONFIG_JFFS2_DEV "nand0" 165 /* start of jffs2 partition */ 166 #define CONFIG_JFFS2_PART_OFFSET 0x680000 167 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 168 /* partition */ 169 170 /* Environment information */ 171 #define CONFIG_BOOTDELAY 10 172 173 #define CONFIG_EXTRA_ENV_SETTINGS \ 174 "loadaddr=0x82000000\0" \ 175 "usbtty=cdc_acm\0" \ 176 "console=ttyS2,115200n8\0" \ 177 "mmcdev=0\0" \ 178 "videomode=1024x768@60,vxres=1024,vyres=768\0" \ 179 "videospec=omapfb:vram:2M,vram:4M\0" \ 180 "mmcargs=setenv bootargs console=${console} " \ 181 "video=${videospec},mode:${videomode} " \ 182 "root=/dev/mmcblk0p2 rw " \ 183 "rootfstype=ext3 rootwait\0" \ 184 "nandargs=setenv bootargs console=${console} " \ 185 "video=${videospec},mode:${videomode} " \ 186 "root=/dev/mtdblock4 rw " \ 187 "rootfstype=jffs2\0" \ 188 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 189 "bootscript=echo Running bootscript from mmc ...; " \ 190 "source ${loadaddr}\0" \ 191 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 192 "mmcboot=echo Booting from mmc ...; " \ 193 "run mmcargs; " \ 194 "bootm ${loadaddr}\0" \ 195 "nandboot=echo Booting from nand ...; " \ 196 "run nandargs; " \ 197 "nand read ${loadaddr} 280000 400000; " \ 198 "bootm ${loadaddr}\0" \ 199 200 #define CONFIG_BOOTCOMMAND \ 201 "mmc dev ${mmcdev}; if mmc rescan; then " \ 202 "if run loadbootscript; then " \ 203 "run bootscript; " \ 204 "else " \ 205 "if run loaduimage; then " \ 206 "run mmcboot; " \ 207 "else run nandboot; " \ 208 "fi; " \ 209 "fi; " \ 210 "else run nandboot; fi" 211 212 #define CONFIG_AUTO_COMPLETE 1 213 /* 214 * Miscellaneous configurable options 215 */ 216 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 217 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 218 #define CONFIG_SYS_PROMPT "OMAP3 Zoom1 # " 219 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 220 /* Print Buffer Size */ 221 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 222 sizeof(CONFIG_SYS_PROMPT) + 16) 223 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 224 /* Boot Argument Buffer Size */ 225 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 226 227 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ 228 /* works on */ 229 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 230 0x01F00000) /* 31MB */ 231 232 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 233 /* load address */ 234 235 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 236 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 237 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 238 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 239 CONFIG_SYS_INIT_RAM_SIZE - \ 240 GENERATED_GBL_DATA_SIZE) 241 /* 242 * OMAP3 has 12 GP timers, they can be driven by the system clock 243 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 244 * This rate is divided by a local divisor. 245 */ 246 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 247 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 248 #define CONFIG_SYS_HZ 1000 249 250 /*----------------------------------------------------------------------- 251 * Physical Memory Map 252 */ 253 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 254 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 255 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 256 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 257 258 /*----------------------------------------------------------------------- 259 * FLASH and environment organization 260 */ 261 262 /* **** PISMO SUPPORT *** */ 263 264 /* Configure the PISMO */ 265 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 266 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 267 268 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 269 270 #if defined(CONFIG_CMD_NAND) 271 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE 272 #endif 273 274 /* Monitor at start of flash */ 275 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 276 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 277 278 #define CONFIG_ENV_IS_IN_NAND 1 279 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 280 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 281 282 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 283 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 284 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 285 286 #define CONFIG_SYS_CACHELINE_SIZE 64 287 288 #endif /* __CONFIG_H */ 289