1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * Nishanth Menon <nm@ti.com> 7 * 8 * Configuration settings for the TI OMAP3430 Zoom MDK board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 17 #include <asm/arch/cpu.h> /* get chip and board defs */ 18 #include <asm/arch/omap.h> 19 #include <configs/ti_omap3_common.h> 20 21 /* Remove SPL boot option - we do not support that on LDP yet */ 22 #undef CONFIG_SPL_FRAMEWORK 23 24 /* Generic NAND definition conflicts with debug_base */ 25 #undef CONFIG_SYS_NAND_BASE 26 27 #define CONFIG_MISC_INIT_R 28 29 #define CONFIG_REVISION_TAG 1 30 31 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 32 33 /* 34 * Hardware drivers 35 */ 36 37 /* USB */ 38 #define CONFIG_USB_MUSB_UDC 1 39 #define CONFIG_USB_OMAP3 1 40 #define CONFIG_TWL4030_USB 1 41 42 /* USB device configuration */ 43 #define CONFIG_USB_DEVICE 1 44 #define CONFIG_USB_TTY 1 45 /* Change these to suit your needs */ 46 #define CONFIG_USBD_VENDORID 0x0451 47 #define CONFIG_USBD_PRODUCTID 0x5678 48 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 49 #define CONFIG_USBD_PRODUCT_NAME "Zoom1" 50 51 #define MTDIDS_DEFAULT "nand0=nand" 52 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 53 "1920k(u-boot),128k(u-boot-env),"\ 54 "4m(kernel),-(fs)" 55 56 #if defined(CONFIG_CMD_NAND) 57 /* NAND: SPL falcon mode configs */ 58 #ifdef CONFIG_SPL_OS_BOOT 59 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 60 #endif 61 #endif 62 63 /* 64 * TWL4030 65 */ 66 #define CONFIG_TWL4030_LED 1 67 68 /* 69 * Board NAND Info. 70 */ 71 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 72 /* to access nand */ 73 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 74 /* to access nand at */ 75 /* CS0 */ 76 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 77 78 /* Environment information */ 79 80 #define CONFIG_EXTRA_ENV_SETTINGS \ 81 "loadaddr=0x82000000\0" \ 82 "fdtaddr=0x80f80000\0" \ 83 "bootfile=uImage\0" \ 84 "fdtfile=omap3-ldp.dtb\0" \ 85 "bootdir=/\0" \ 86 "bootpart=0:1\0" \ 87 "usbtty=cdc_acm\0" \ 88 "console=ttyO2,115200n8\0" \ 89 "mmcdev=0\0" \ 90 "videomode=1024x768@60,vxres=1024,vyres=768\0" \ 91 "videospec=omapfb:vram:2M,vram:4M\0" \ 92 "mmcargs=setenv bootargs console=${console} " \ 93 "video=${videospec},mode:${videomode} " \ 94 "root=/dev/mmcblk0p2 rw " \ 95 "rootfstype=ext3 rootwait\0" \ 96 "nandargs=setenv bootargs console=${console} " \ 97 "video=${videospec},mode:${videomode} " \ 98 "root=/dev/mtdblock4 rw " \ 99 "rootfstype=jffs2\0" \ 100 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 101 "bootscript=echo Running bootscript from mmc ...; " \ 102 "source ${loadaddr}\0" \ 103 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ 104 "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ 105 "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\ 106 "mmcboot=echo Booting from mmc ...; " \ 107 "run mmcargs; " \ 108 "bootm ${loadaddr}\0" \ 109 "mmczboot=echo Booting from mmc ...; " \ 110 "run mmcargs; " \ 111 "bootz ${loadaddr} - ${fdtaddr}\0" \ 112 "nandboot=echo Booting from nand ...; " \ 113 "run nandargs; " \ 114 "nand read ${loadaddr} 280000 400000; " \ 115 "bootm ${loadaddr}\0" \ 116 117 #define CONFIG_BOOTCOMMAND \ 118 "mmc dev ${mmcdev}; if mmc rescan; then " \ 119 "if run loadbootscript; then " \ 120 "run bootscript; " \ 121 "else " \ 122 "if run loadimage; then " \ 123 "run mmcboot; " \ 124 "else if run loadzimage; then " \ 125 "run mmczboot; " \ 126 "else run nandboot; " \ 127 "fi; fi;" \ 128 "fi; " \ 129 "else run nandboot; fi" 130 131 /* 132 * Miscellaneous configurable options 133 */ 134 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) /* memtest */ 135 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_2 + \ 136 0x01F00000) /* 31MB */ 137 138 /*----------------------------------------------------------------------- 139 * FLASH and environment organization 140 */ 141 142 /* **** PISMO SUPPORT *** */ 143 #if defined(CONFIG_CMD_NAND) 144 #define CONFIG_SYS_FLASH_BASE NAND_BASE 145 #endif 146 147 /* Monitor at start of flash */ 148 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 149 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 150 151 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 152 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 153 154 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 155 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 156 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 157 158 #ifdef CONFIG_CMD_NET 159 /* Ethernet (LAN9211 from SMSC9118 family) */ 160 #define CONFIG_SMC911X 161 #define CONFIG_SMC911X_32_BIT 162 #define CONFIG_SMC911X_BASE DEBUG_BASE 163 164 #endif 165 166 #endif /* __CONFIG_H */ 167