1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * Nishanth Menon <nm@ti.com> 7 * 8 * Configuration settings for the TI OMAP3430 Zoom MDK board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 17 #include <asm/arch/cpu.h> /* get chip and board defs */ 18 #include <asm/arch/omap.h> 19 #include <configs/ti_omap3_common.h> 20 21 /* Remove SPL boot option - we do not support that on LDP yet */ 22 23 /* Generic NAND definition conflicts with debug_base */ 24 #undef CONFIG_SYS_NAND_BASE 25 26 #define CONFIG_MISC_INIT_R 27 28 #define CONFIG_REVISION_TAG 1 29 30 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 31 32 /* 33 * Hardware drivers 34 */ 35 36 /* USB device configuration */ 37 #define CONFIG_USB_DEVICE 1 38 #define CONFIG_USB_TTY 1 39 /* Change these to suit your needs */ 40 #define CONFIG_USBD_VENDORID 0x0451 41 #define CONFIG_USBD_PRODUCTID 0x5678 42 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 43 #define CONFIG_USBD_PRODUCT_NAME "Zoom1" 44 45 #if defined(CONFIG_CMD_NAND) 46 /* NAND: SPL falcon mode configs */ 47 #ifdef CONFIG_SPL_OS_BOOT 48 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 49 #endif 50 #endif 51 52 /* 53 * TWL4030 54 */ 55 #define CONFIG_TWL4030_LED 1 56 57 /* 58 * Board NAND Info. 59 */ 60 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 61 /* to access nand */ 62 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 63 /* to access nand at */ 64 /* CS0 */ 65 66 /* Environment information */ 67 68 #define CONFIG_EXTRA_ENV_SETTINGS \ 69 "loadaddr=0x82000000\0" \ 70 "fdtaddr=0x80f80000\0" \ 71 "bootfile=uImage\0" \ 72 "fdtfile=omap3-ldp.dtb\0" \ 73 "bootdir=/\0" \ 74 "bootpart=0:1\0" \ 75 "usbtty=cdc_acm\0" \ 76 "console=ttyO2,115200n8\0" \ 77 "mmcdev=0\0" \ 78 "videomode=1024x768@60,vxres=1024,vyres=768\0" \ 79 "videospec=omapfb:vram:2M,vram:4M\0" \ 80 "mmcargs=setenv bootargs console=${console} " \ 81 "video=${videospec},mode:${videomode} " \ 82 "root=/dev/mmcblk0p2 rw " \ 83 "rootfstype=ext3 rootwait\0" \ 84 "nandargs=setenv bootargs console=${console} " \ 85 "video=${videospec},mode:${videomode} " \ 86 "root=/dev/mtdblock4 rw " \ 87 "rootfstype=jffs2\0" \ 88 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 89 "bootscript=echo Running bootscript from mmc ...; " \ 90 "source ${loadaddr}\0" \ 91 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ 92 "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ 93 "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\ 94 "mmcboot=echo Booting from mmc ...; " \ 95 "run mmcargs; " \ 96 "bootm ${loadaddr}\0" \ 97 "mmczboot=echo Booting from mmc ...; " \ 98 "run mmcargs; " \ 99 "bootz ${loadaddr} - ${fdtaddr}\0" \ 100 "nandboot=echo Booting from nand ...; " \ 101 "run nandargs; " \ 102 "nand read ${loadaddr} 280000 400000; " \ 103 "bootm ${loadaddr}\0" \ 104 105 #define CONFIG_BOOTCOMMAND \ 106 "mmc dev ${mmcdev}; if mmc rescan; then " \ 107 "if run loadbootscript; then " \ 108 "run bootscript; " \ 109 "else " \ 110 "if run loadimage; then " \ 111 "run mmcboot; " \ 112 "else if run loadzimage; then " \ 113 "run mmczboot; " \ 114 "else run nandboot; " \ 115 "fi; fi;" \ 116 "fi; " \ 117 "else run nandboot; fi" 118 119 /* 120 * Miscellaneous configurable options 121 */ 122 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) /* memtest */ 123 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_2 + \ 124 0x01F00000) /* 31MB */ 125 126 /*----------------------------------------------------------------------- 127 * FLASH and environment organization 128 */ 129 130 /* **** PISMO SUPPORT *** */ 131 #if defined(CONFIG_CMD_NAND) 132 #define CONFIG_SYS_FLASH_BASE NAND_BASE 133 #endif 134 135 /* Monitor at start of flash */ 136 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 137 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 138 139 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 140 141 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 142 #define CONFIG_ENV_OFFSET 0x260000 143 #define CONFIG_ENV_ADDR 0x260000 144 145 #endif /* __CONFIG_H */ 146