1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * Nishanth Menon <nm@ti.com> 7 * 8 * Configuration settings for the TI OMAP3430 Zoom MDK board. 9 * 10 * See file CREDITS for list of people who contributed to this 11 * project. 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License as 15 * published by the Free Software Foundation; either version 2 of 16 * the License, or (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 26 * MA 02111-1307 USA 27 */ 28 29 #ifndef __CONFIG_H 30 #define __CONFIG_H 31 32 /* 33 * High Level Configuration Options 34 */ 35 #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ 36 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 37 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 38 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 39 #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ 40 41 #include <asm/arch/cpu.h> /* get chip and board defs */ 42 #include <asm/arch/omap3.h> 43 44 /* 45 * Display CPU and Board information 46 */ 47 #define CONFIG_DISPLAY_CPUINFO 1 48 #define CONFIG_DISPLAY_BOARDINFO 1 49 50 /* Clock Defines */ 51 #define V_OSCK 26000000 /* Clock output from T2 */ 52 #define V_SCLK (V_OSCK >> 1) 53 54 #undef CONFIG_USE_IRQ /* no support for IRQs */ 55 #define CONFIG_MISC_INIT_R 56 57 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 58 #define CONFIG_SETUP_MEMORY_TAGS 1 59 #define CONFIG_INITRD_TAG 1 60 #define CONFIG_REVISION_TAG 1 61 62 /* 63 * Size of malloc() pool 64 */ 65 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 66 /* Sector */ 67 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 68 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ 69 /* initial data */ 70 71 /* 72 * Hardware drivers 73 */ 74 75 /* 76 * NS16550 Configuration 77 */ 78 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 79 80 #define CONFIG_SYS_NS16550 81 #define CONFIG_SYS_NS16550_SERIAL 82 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 83 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 84 85 /* 86 * select serial console configuration 87 */ 88 #define CONFIG_CONS_INDEX 3 89 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 90 #define CONFIG_SERIAL3 3 /* UART3 */ 91 92 /* allow to overwrite serial and ethaddr */ 93 #define CONFIG_ENV_OVERWRITE 94 #define CONFIG_BAUDRATE 115200 95 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 96 115200} 97 #define CONFIG_MMC 1 98 #define CONFIG_OMAP3_MMC 1 99 #define CONFIG_DOS_PARTITION 1 100 101 /* DDR - I use Micron DDR */ 102 #define CONFIG_OMAP3_MICRON_DDR 1 103 104 /* USB */ 105 #define CONFIG_MUSB_UDC 1 106 #define CONFIG_USB_OMAP3 1 107 #define CONFIG_TWL4030_USB 1 108 109 /* USB device configuration */ 110 #define CONFIG_USB_DEVICE 1 111 #define CONFIG_USB_TTY 1 112 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 113 /* Change these to suit your needs */ 114 #define CONFIG_USBD_VENDORID 0x0451 115 #define CONFIG_USBD_PRODUCTID 0x5678 116 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 117 #define CONFIG_USBD_PRODUCT_NAME "Zoom1" 118 119 /* commands to include */ 120 #include <config_cmd_default.h> 121 122 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 123 #define CONFIG_CMD_FAT /* FAT support */ 124 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 125 126 #define CONFIG_CMD_I2C /* I2C serial bus support */ 127 #define CONFIG_CMD_MMC /* MMC support */ 128 #define CONFIG_CMD_NAND /* NAND support */ 129 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ 130 131 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 132 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 133 #undef CONFIG_CMD_IMI /* iminfo */ 134 #undef CONFIG_CMD_IMLS /* List all found images */ 135 #undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 136 #undef CONFIG_CMD_NFS /* NFS support */ 137 138 #define CONFIG_SYS_NO_FLASH 139 #define CONFIG_HARD_I2C 1 140 #define CONFIG_SYS_I2C_SPEED 100000 141 #define CONFIG_SYS_I2C_SLAVE 1 142 #define CONFIG_SYS_I2C_BUS 0 143 #define CONFIG_SYS_I2C_BUS_SELECT 1 144 #define CONFIG_DRIVER_OMAP34XX_I2C 1 145 146 /* 147 * TWL4030 148 */ 149 #define CONFIG_TWL4030_POWER 1 150 #define CONFIG_TWL4030_LED 1 151 152 /* 153 * Board NAND Info. 154 */ 155 #define CONFIG_NAND_OMAP_GPMC 156 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 157 /* to access nand */ 158 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 159 /* to access nand at */ 160 /* CS0 */ 161 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 162 163 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 164 /* devices */ 165 #define CONFIG_JFFS2_NAND 166 /* nand device jffs2 lives on */ 167 #define CONFIG_JFFS2_DEV "nand0" 168 /* start of jffs2 partition */ 169 #define CONFIG_JFFS2_PART_OFFSET 0x680000 170 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 171 /* partition */ 172 173 /* Environment information */ 174 #define CONFIG_BOOTDELAY 10 175 176 #define CONFIG_EXTRA_ENV_SETTINGS \ 177 "loadaddr=0x82000000\0" \ 178 "usbtty=cdc_acm\0" \ 179 "console=ttyS2,115200n8\0" \ 180 "videomode=1024x768@60,vxres=1024,vyres=768\0" \ 181 "videospec=omapfb:vram:2M,vram:4M\0" \ 182 "mmcargs=setenv bootargs console=${console} " \ 183 "video=${videospec},mode:${videomode} " \ 184 "root=/dev/mmcblk0p2 rw " \ 185 "rootfstype=ext3 rootwait\0" \ 186 "nandargs=setenv bootargs console=${console} " \ 187 "video=${videospec},mode:${videomode} " \ 188 "root=/dev/mtdblock4 rw " \ 189 "rootfstype=jffs2\0" \ 190 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 191 "bootscript=echo Running bootscript from mmc ...; " \ 192 "source ${loadaddr}\0" \ 193 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 194 "mmcboot=echo Booting from mmc ...; " \ 195 "run mmcargs; " \ 196 "bootm ${loadaddr}\0" \ 197 "nandboot=echo Booting from nand ...; " \ 198 "run nandargs; " \ 199 "nand read ${loadaddr} 280000 400000; " \ 200 "bootm ${loadaddr}\0" \ 201 202 #define CONFIG_BOOTCOMMAND \ 203 "if mmc init; then " \ 204 "if run loadbootscript; then " \ 205 "run bootscript; " \ 206 "else " \ 207 "if run loaduimage; then " \ 208 "run mmcboot; " \ 209 "else run nandboot; " \ 210 "fi; " \ 211 "fi; " \ 212 "else run nandboot; fi" 213 214 #define CONFIG_AUTO_COMPLETE 1 215 /* 216 * Miscellaneous configurable options 217 */ 218 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 219 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 220 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 221 #define CONFIG_SYS_PROMPT "OMAP3 Zoom1 # " 222 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 223 /* Print Buffer Size */ 224 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 225 sizeof(CONFIG_SYS_PROMPT) + 16) 226 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 227 /* Boot Argument Buffer Size */ 228 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 229 230 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ 231 /* works on */ 232 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 233 0x01F00000) /* 31MB */ 234 235 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 236 /* load address */ 237 238 /* 239 * OMAP3 has 12 GP timers, they can be driven by the system clock 240 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 241 * This rate is divided by a local divisor. 242 */ 243 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 244 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 245 #define CONFIG_SYS_HZ 1000 246 247 /*----------------------------------------------------------------------- 248 * Stack sizes 249 * 250 * The stack sizes are set up in start.S using the settings below 251 */ 252 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 253 #ifdef CONFIG_USE_IRQ 254 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 255 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 256 #endif 257 258 /*----------------------------------------------------------------------- 259 * Physical Memory Map 260 */ 261 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 262 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 263 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 264 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 265 266 /* SDRAM Bank Allocation method */ 267 #define SDRC_R_B_C 1 268 269 /*----------------------------------------------------------------------- 270 * FLASH and environment organization 271 */ 272 273 /* **** PISMO SUPPORT *** */ 274 275 /* Configure the PISMO */ 276 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 277 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 278 279 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ 280 /* one chip */ 281 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 282 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 283 284 #define CONFIG_SYS_FLASH_BASE boot_flash_base 285 286 /* Monitor at start of flash */ 287 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 288 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 289 290 #define CONFIG_ENV_IS_IN_NAND 1 291 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 292 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 293 294 #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec 295 #define CONFIG_ENV_OFFSET boot_flash_off 296 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 297 298 /*----------------------------------------------------------------------- 299 * CFI FLASH driver setup 300 */ 301 /* timeout values are in ticks */ 302 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 303 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 304 305 /* Flash banks JFFS2 should use */ 306 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 307 CONFIG_SYS_MAX_NAND_DEVICE) 308 #define CONFIG_SYS_JFFS2_MEM_NAND 309 /* use flash_info[2] */ 310 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 311 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 312 313 #ifndef __ASSEMBLY__ 314 extern unsigned int boot_flash_base; 315 extern volatile unsigned int boot_flash_env_addr; 316 extern unsigned int boot_flash_off; 317 extern unsigned int boot_flash_sec; 318 extern unsigned int boot_flash_type; 319 #endif 320 321 #endif /* __CONFIG_H */ 322