1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2008-2010 4 * Gražvydas Ignotas <notasas@gmail.com> 5 * 6 * Configuration settings for the OMAP3 Pandora. 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 /* override base for compatibility with MLO the device ships with */ 13 14 #include <configs/ti_omap3_common.h> 15 16 #define CONFIG_REVISION_TAG 1 17 18 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 19 20 #define CONFIG_SYS_DEVICE_NULLDEV 1 21 22 /* 23 * Board NAND Info. 24 */ 25 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW 26 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 27 #define CONFIG_SYS_NAND_OOBSIZE 64 28 29 30 #define CONFIG_BOOTCOMMAND \ 31 "run distro_bootcmd; " \ 32 "setenv bootargs ${bootargs_ubi}; " \ 33 "if mmc rescan && load mmc 0:1 ${loadaddr} autoboot.scr; then " \ 34 "source ${loadaddr}; " \ 35 "fi; " \ 36 "ubi part boot && ubifsmount ubi:boot && " \ 37 "ubifsload ${loadaddr} uImage && bootm ${loadaddr}" 38 39 #define BOOT_TARGET_DEVICES(func) \ 40 func(MMC, mmc, 0) \ 41 42 #include <config_distro_bootcmd.h> 43 44 #define CONFIG_EXTRA_ENV_SETTINGS \ 45 DEFAULT_LINUX_BOOT_ENV \ 46 "usbtty=cdc_acm\0" \ 47 "bootargs_ubi=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \ 48 "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \ 49 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 50 BOOTENV \ 51 52 /* memtest works on */ 53 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 54 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 55 0x01F00000) /* 31MB */ 56 57 #if defined(CONFIG_NAND) 58 #define CONFIG_SYS_FLASH_BASE NAND_BASE 59 #endif 60 61 /* Monitor at start of flash */ 62 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 63 64 65 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 66 #define CONFIG_ENV_OFFSET 0x260000 67 #define CONFIG_ENV_ADDR 0x260000 68 69 #endif /* __CONFIG_H */ 70