1 /* 2 * Configuration settings for the Gumstix Overo board. 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation; either version 2 of 7 * the License, or (at your option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software 16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 17 * MA 02111-1307 USA 18 */ 19 20 #ifndef __CONFIG_H 21 #define __CONFIG_H 22 #include <asm/sizes.h> 23 24 /* 25 * High Level Configuration Options 26 */ 27 #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ 28 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 29 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 30 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 31 #define CONFIG_OMAP3_OVERO 1 /* working with overo */ 32 33 #include <asm/arch/cpu.h> /* get chip and board defs */ 34 #include <asm/arch/omap3.h> 35 36 /* 37 * Display CPU and Board information 38 */ 39 #define CONFIG_DISPLAY_CPUINFO 1 40 #define CONFIG_DISPLAY_BOARDINFO 1 41 42 /* Clock Defines */ 43 #define V_OSCK 26000000 /* Clock output from T2 */ 44 #define V_SCLK (V_OSCK >> 1) 45 46 #undef CONFIG_USE_IRQ /* no support for IRQs */ 47 #define CONFIG_MISC_INIT_R 48 49 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 50 #define CONFIG_SETUP_MEMORY_TAGS 1 51 #define CONFIG_INITRD_TAG 1 52 #define CONFIG_REVISION_TAG 1 53 54 /* 55 * Size of malloc() pool 56 */ 57 #define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ 58 /* Sector */ 59 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) 60 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ 61 /* initial data */ 62 63 /* 64 * Hardware drivers 65 */ 66 67 /* 68 * NS16550 Configuration 69 */ 70 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 71 72 #define CONFIG_SYS_NS16550 73 #define CONFIG_SYS_NS16550_SERIAL 74 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 75 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 76 77 /* 78 * select serial console configuration 79 */ 80 #define CONFIG_CONS_INDEX 3 81 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 82 #define CONFIG_SERIAL3 3 83 84 /* allow to overwrite serial and ethaddr */ 85 #define CONFIG_ENV_OVERWRITE 86 #define CONFIG_BAUDRATE 115200 87 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 88 115200} 89 #define CONFIG_MMC 1 90 #define CONFIG_OMAP3_MMC 1 91 #define CONFIG_DOS_PARTITION 1 92 93 /* commands to include */ 94 #include <config_cmd_default.h> 95 96 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 97 #define CONFIG_CMD_FAT /* FAT support */ 98 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 99 100 #define CONFIG_CMD_I2C /* I2C serial bus support */ 101 #define CONFIG_CMD_MMC /* MMC support */ 102 #define CONFIG_CMD_NAND /* NAND support */ 103 104 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 105 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 106 #undef CONFIG_CMD_IMI /* iminfo */ 107 #undef CONFIG_CMD_IMLS /* List all found images */ 108 #undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 109 #undef CONFIG_CMD_NFS /* NFS support */ 110 111 #define CONFIG_SYS_NO_FLASH 112 #define CONFIG_SYS_I2C_SPEED 100000 113 #define CONFIG_SYS_I2C_SLAVE 1 114 #define CONFIG_SYS_I2C_BUS 0 115 #define CONFIG_SYS_I2C_BUS_SELECT 1 116 #define CONFIG_DRIVER_OMAP34XX_I2C 1 117 118 /* 119 * Board NAND Info. 120 */ 121 #define CONFIG_NAND_OMAP_GPMC 122 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 123 /* to access nand */ 124 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 125 /* to access nand */ 126 /* at CS0 */ 127 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 128 129 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 130 /* devices */ 131 #define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ 132 133 #define CONFIG_JFFS2_NAND 134 /* nand device jffs2 lives on */ 135 #define CONFIG_JFFS2_DEV "nand0" 136 /* start of jffs2 partition */ 137 #define CONFIG_JFFS2_PART_OFFSET 0x680000 138 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 139 /* partition */ 140 141 /* Environment information */ 142 #define CONFIG_BOOTDELAY 5 143 144 #define CONFIG_EXTRA_ENV_SETTINGS \ 145 "loadaddr=0x82000000\0" \ 146 "console=ttyS2,115200n8\0" \ 147 "videomode=1024x768@60,vxres=1024,vyres=768\0" \ 148 "videospec=omapfb:vram:2M,vram:4M\0" \ 149 "mmcargs=setenv bootargs console=${console} " \ 150 "video=${videospec},mode:${videomode} " \ 151 "root=/dev/mmcblk0p2 rw " \ 152 "rootfstype=ext3 rootwait\0" \ 153 "nandargs=setenv bootargs console=${console} " \ 154 "video=${videospec},mode:${videomode} " \ 155 "root=/dev/mtdblock4 rw " \ 156 "rootfstype=jffs2\0" \ 157 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 158 "bootscript=echo Running bootscript from mmc ...; " \ 159 "source ${loadaddr}\0" \ 160 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 161 "mmcboot=echo Booting from mmc ...; " \ 162 "run mmcargs; " \ 163 "bootm ${loadaddr}\0" \ 164 "nandboot=echo Booting from nand ...; " \ 165 "run nandargs; " \ 166 "nand read ${loadaddr} 280000 400000; " \ 167 "bootm ${loadaddr}\0" \ 168 169 #define CONFIG_BOOTCOMMAND \ 170 "if mmc init; then " \ 171 "if run loadbootscript; then " \ 172 "run bootscript; " \ 173 "else " \ 174 "if run loaduimage; then " \ 175 "run mmcboot; " \ 176 "else run nandboot; " \ 177 "fi; " \ 178 "fi; " \ 179 "else run nandboot; fi" 180 181 #define CONFIG_AUTO_COMPLETE 1 182 /* 183 * Miscellaneous configurable options 184 */ 185 #define V_PROMPT "Overo # " 186 187 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 188 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 189 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 190 #define CONFIG_SYS_PROMPT V_PROMPT 191 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 192 /* Print Buffer Size */ 193 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 194 sizeof(CONFIG_SYS_PROMPT) + 16) 195 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 196 /* args */ 197 /* Boot Argument Buffer Size */ 198 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 199 /* memtest works on */ 200 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 201 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 202 0x01F00000) /* 31MB */ 203 204 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 205 /* address */ 206 /* 207 * OMAP3 has 12 GP timers, they can be driven by the system clock 208 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 209 * This rate is divided by a local divisor. 210 */ 211 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 212 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 213 #define CONFIG_SYS_HZ 1000 214 215 /*----------------------------------------------------------------------- 216 * Stack sizes 217 * 218 * The stack sizes are set up in start.S using the settings below 219 */ 220 #define CONFIG_STACKSIZE SZ_128K /* regular stack */ 221 #ifdef CONFIG_USE_IRQ 222 #define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ 223 #define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ 224 #endif 225 226 /*----------------------------------------------------------------------- 227 * Physical Memory Map 228 */ 229 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 230 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 231 #define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ 232 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 233 234 /* SDRAM Bank Allocation method */ 235 #define SDRC_R_B_C 1 236 237 /*----------------------------------------------------------------------- 238 * FLASH and environment organization 239 */ 240 241 /* **** PISMO SUPPORT *** */ 242 243 /* Configure the PISMO */ 244 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 245 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 246 247 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ 248 /* one chip */ 249 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 250 #define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ 251 252 #define CONFIG_SYS_FLASH_BASE boot_flash_base 253 254 /* Monitor at start of flash */ 255 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 256 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 257 258 #define CONFIG_ENV_IS_IN_NAND 1 259 #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ 260 #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ 261 262 #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec 263 #define CONFIG_ENV_OFFSET boot_flash_off 264 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 265 266 /*----------------------------------------------------------------------- 267 * CFI FLASH driver setup 268 */ 269 /* timeout values are in ticks */ 270 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 271 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 272 273 /* Flash banks JFFS2 should use */ 274 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 275 CONFIG_SYS_MAX_NAND_DEVICE) 276 #define CONFIG_SYS_JFFS2_MEM_NAND 277 /* use flash_info[2] */ 278 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 279 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 280 281 #ifndef __ASSEMBLY__ 282 extern gpmc_csx_t *nand_cs_base; 283 extern gpmc_t *gpmc_cfg_base; 284 extern unsigned int boot_flash_base; 285 extern volatile unsigned int boot_flash_env_addr; 286 extern unsigned int boot_flash_off; 287 extern unsigned int boot_flash_sec; 288 extern unsigned int boot_flash_type; 289 #endif 290 291 #endif /* __CONFIG_H */ 292