1 /* 2 * Configuration settings for the Gumstix Overo board. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 /* 11 * High Level Configuration Options 12 */ 13 #define CONFIG_OMAP /* in a TI OMAP core */ 14 #define CONFIG_OMAP34XX /* which is a 34XX */ 15 #define CONFIG_OMAP3_OVERO /* working with overo */ 16 #define CONFIG_OMAP_GPIO 17 #define CONFIG_OMAP_COMMON 18 19 #define CONFIG_SDRC /* The chip has SDRC controller */ 20 21 #include <asm/arch/cpu.h> /* get chip and board defs */ 22 #include <asm/arch/omap3.h> 23 24 /* 25 * Display CPU and Board information 26 */ 27 #define CONFIG_DISPLAY_CPUINFO 28 #define CONFIG_DISPLAY_BOARDINFO 29 30 /* Clock Defines */ 31 #define V_OSCK 26000000 /* Clock output from T2 */ 32 #define V_SCLK (V_OSCK >> 1) 33 34 #define CONFIG_MISC_INIT_R 35 36 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 37 #define CONFIG_SETUP_MEMORY_TAGS 38 #define CONFIG_INITRD_TAG 39 #define CONFIG_REVISION_TAG 40 41 #define CONFIG_OF_LIBFDT 42 43 /* 44 * Size of malloc() pool 45 */ 46 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 47 /* Sector */ 48 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 49 50 /* 51 * Hardware drivers 52 */ 53 54 /* 55 * NS16550 Configuration 56 */ 57 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 58 59 #define CONFIG_SYS_NS16550 60 #define CONFIG_SYS_NS16550_SERIAL 61 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 62 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 63 64 /* 65 * select serial console configuration 66 */ 67 #define CONFIG_CONS_INDEX 3 68 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 69 #define CONFIG_SERIAL3 3 70 71 /* allow to overwrite serial and ethaddr */ 72 #define CONFIG_ENV_OVERWRITE 73 #define CONFIG_BAUDRATE 115200 74 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 75 115200} 76 #define CONFIG_GENERIC_MMC 77 #define CONFIG_MMC 78 #define CONFIG_OMAP_HSMMC 79 #define CONFIG_DOS_PARTITION 80 81 /* commands to include */ 82 #include <config_cmd_default.h> 83 84 #define CONFIG_CMD_CACHE 85 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 86 #define CONFIG_CMD_FAT /* FAT support */ 87 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 88 89 #define CONFIG_CMD_I2C /* I2C serial bus support */ 90 #define CONFIG_CMD_MMC /* MMC support */ 91 #define CONFIG_CMD_NAND /* NAND support */ 92 93 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 94 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 95 #undef CONFIG_CMD_IMI /* iminfo */ 96 #undef CONFIG_CMD_IMLS /* List all found images */ 97 #undef CONFIG_CMD_NFS /* NFS support */ 98 #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 99 100 #define CONFIG_SYS_NO_FLASH 101 #define CONFIG_SYS_I2C 102 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 103 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 104 #define CONFIG_SYS_I2C_OMAP34XX 105 106 /* 107 * TWL4030 108 */ 109 #define CONFIG_TWL4030_POWER 110 #define CONFIG_TWL4030_LED 111 112 /* 113 * Board NAND Info. 114 */ 115 #define CONFIG_SYS_NAND_QUIET_TEST 116 #define CONFIG_NAND_OMAP_GPMC 117 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 118 /* to access nand */ 119 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 120 /* to access nand */ 121 /* at CS0 */ 122 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 123 /* devices */ 124 #define CONFIG_JFFS2_NAND 125 /* nand device jffs2 lives on */ 126 #define CONFIG_JFFS2_DEV "nand0" 127 /* start of jffs2 partition */ 128 #define CONFIG_JFFS2_PART_OFFSET 0x680000 129 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 130 /* partition */ 131 132 /* Environment information */ 133 #define CONFIG_BOOTDELAY 5 134 135 #define CONFIG_EXTRA_ENV_SETTINGS \ 136 "loadaddr=0x82000000\0" \ 137 "console=ttyO2,115200n8\0" \ 138 "mpurate=500\0" \ 139 "optargs=\0" \ 140 "vram=12M\0" \ 141 "dvimode=1024x768MR-16@60\0" \ 142 "defaultdisplay=dvi\0" \ 143 "mmcdev=0\0" \ 144 "mmcroot=/dev/mmcblk0p2 rw\0" \ 145 "mmcrootfstype=ext3 rootwait\0" \ 146 "nandroot=ubi0:rootfs ubi.mtd=4\0" \ 147 "nandrootfstype=ubifs\0" \ 148 "mmcargs=setenv bootargs console=${console} " \ 149 "${optargs} " \ 150 "mpurate=${mpurate} " \ 151 "vram=${vram} " \ 152 "omapfb.mode=dvi:${dvimode} " \ 153 "omapdss.def_disp=${defaultdisplay} " \ 154 "root=${mmcroot} " \ 155 "rootfstype=${mmcrootfstype}\0" \ 156 "nandargs=setenv bootargs console=${console} " \ 157 "${optargs} " \ 158 "mpurate=${mpurate} " \ 159 "vram=${vram} " \ 160 "omapfb.mode=dvi:${dvimode} " \ 161 "omapdss.def_disp=${defaultdisplay} " \ 162 "root=${nandroot} " \ 163 "rootfstype=${nandrootfstype}\0" \ 164 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 165 "bootscript=echo Running bootscript from mmc ...; " \ 166 "source ${loadaddr}\0" \ 167 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 168 "mmcboot=echo Booting from mmc ...; " \ 169 "run mmcargs; " \ 170 "bootm ${loadaddr}\0" \ 171 "nandboot=echo Booting from nand ...; " \ 172 "run nandargs; " \ 173 "nand read ${loadaddr} 280000 400000; " \ 174 "bootm ${loadaddr}\0" \ 175 176 #define CONFIG_BOOTCOMMAND \ 177 "mmc dev ${mmcdev}; if mmc rescan; then " \ 178 "if run loadbootscript; then " \ 179 "run bootscript; " \ 180 "else " \ 181 "if run loaduimage; then " \ 182 "run mmcboot; " \ 183 "else run nandboot; " \ 184 "fi; " \ 185 "fi; " \ 186 "else run nandboot; fi" 187 188 #define CONFIG_AUTO_COMPLETE 1 189 /* 190 * Miscellaneous configurable options 191 */ 192 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 193 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 194 #define CONFIG_SYS_PROMPT "Overo # " 195 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 196 /* Print Buffer Size */ 197 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 198 sizeof(CONFIG_SYS_PROMPT) + 16) 199 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 200 /* args */ 201 /* Boot Argument Buffer Size */ 202 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 203 /* memtest works on */ 204 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 205 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 206 0x01F00000) /* 31MB */ 207 208 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 209 /* address */ 210 /* 211 * OMAP3 has 12 GP timers, they can be driven by the system clock 212 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 213 * This rate is divided by a local divisor. 214 */ 215 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 216 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 217 218 /*----------------------------------------------------------------------- 219 * Physical Memory Map 220 */ 221 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 222 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 223 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 224 225 /*----------------------------------------------------------------------- 226 * FLASH and environment organization 227 */ 228 229 /* **** PISMO SUPPORT *** */ 230 231 /* Configure the PISMO */ 232 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 233 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 234 235 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 236 237 #if defined(CONFIG_CMD_NAND) 238 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE 239 #endif 240 241 /* Monitor at start of flash */ 242 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 243 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 244 245 #define CONFIG_ENV_IS_IN_NAND 246 #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ 247 #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ 248 249 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 250 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 251 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 252 253 #if defined(CONFIG_CMD_NET) 254 /*---------------------------------------------------------------------------- 255 * SMSC9211 Ethernet from SMSC9118 family 256 *---------------------------------------------------------------------------- 257 */ 258 259 #define CONFIG_SMC911X 260 #define CONFIG_SMC911X_32_BIT 261 #define CONFIG_SMC911X_BASE 0x2C000000 262 263 #endif /* (CONFIG_CMD_NET) */ 264 265 /* 266 * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader 267 * and older u-boot.bin with the new U-Boot SPL. 268 */ 269 #define CONFIG_SYS_TEXT_BASE 0x80008000 270 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 271 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 272 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 273 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 274 CONFIG_SYS_INIT_RAM_SIZE - \ 275 GENERATED_GBL_DATA_SIZE) 276 277 #define CONFIG_SYS_CACHELINE_SIZE 64 278 279 /* Defines for SPL */ 280 #define CONFIG_SPL 281 #define CONFIG_SPL_FRAMEWORK 282 #define CONFIG_SPL_NAND_SIMPLE 283 #define CONFIG_SPL_TEXT_BASE 0x40200800 284 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ 285 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 286 287 /* move malloc and bss high to prevent clashing with the main image */ 288 #define CONFIG_SYS_SPL_MALLOC_START 0x87000000 289 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 290 #define CONFIG_SPL_BSS_START_ADDR 0x87080000 /* end of minimum RAM */ 291 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 292 293 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 294 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ 295 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 296 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" 297 298 #define CONFIG_SPL_BOARD_INIT 299 #define CONFIG_SPL_LIBCOMMON_SUPPORT 300 #define CONFIG_SPL_LIBDISK_SUPPORT 301 #define CONFIG_SPL_I2C_SUPPORT 302 #define CONFIG_SPL_LIBGENERIC_SUPPORT 303 #define CONFIG_SPL_MMC_SUPPORT 304 #define CONFIG_SPL_FAT_SUPPORT 305 #define CONFIG_SPL_SERIAL_SUPPORT 306 #define CONFIG_SPL_NAND_SUPPORT 307 #define CONFIG_SPL_NAND_BASE 308 #define CONFIG_SPL_NAND_DRIVERS 309 #define CONFIG_SPL_NAND_ECC 310 #define CONFIG_SPL_GPIO_SUPPORT 311 #define CONFIG_SPL_POWER_SUPPORT 312 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 313 314 /* NAND boot config */ 315 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 316 #define CONFIG_SYS_NAND_PAGE_COUNT 64 317 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 318 #define CONFIG_SYS_NAND_OOBSIZE 64 319 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 320 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 321 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 322 10, 11, 12, 13} 323 #define CONFIG_SYS_NAND_ECCSIZE 512 324 #define CONFIG_SYS_NAND_ECCBYTES 3 325 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 326 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 327 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 328 329 #endif /* __CONFIG_H */ 330