1 /* 2 * Configuration settings for the Gumstix Overo board. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 11 #define CONFIG_NAND 12 13 #include <configs/ti_omap3_common.h> 14 /* 15 * We are only ever GP parts and will utilize all of the "downloaded image" 16 * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). 17 */ 18 #undef CONFIG_SPL_TEXT_BASE 19 #define CONFIG_SPL_TEXT_BASE 0x40200000 20 21 #define CONFIG_BCH 22 23 /* call misc_init_r */ 24 #define CONFIG_MISC_INIT_R 25 26 /* pass the revision tag */ 27 #define CONFIG_REVISION_TAG 28 29 /* override size of malloc() pool */ 30 #undef CONFIG_SYS_MALLOC_LEN 31 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 32 /* Shift 128 << 15 provides 4 MiB heap to support UBI commands. 33 * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */ 34 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15)) 35 36 /* I2C Support */ 37 #define CONFIG_SYS_I2C_OMAP34XX 38 39 /* TWL4030 LED */ 40 #define CONFIG_TWL4030_LED 41 42 /* USB EHCI */ 43 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183 44 45 /* commands to include */ 46 47 #ifdef CONFIG_NAND 48 #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ 49 50 /* NAND block size is 128 KiB. Synchronize these values with 51 * overo_nand_partitions in mach-omap2/board-overo.c in Linux: 52 * xloader 4 * NAND_BLOCK_SIZE = 512 KiB 53 * uboot 14 * NAND_BLOCK_SIZE = 1792 KiB 54 * uboot environtment 2 * NAND_BLOCK_SIZE = 256 KiB 55 * linux 64 * NAND_BLOCK_SIZE = 8 MiB 56 * rootfs remainder 57 */ 58 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 59 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \ 60 "512k(xloader)," \ 61 "1792k(u-boot)," \ 62 "256k(environ)," \ 63 "8m(linux)," \ 64 "-(rootfs)" 65 #else /* CONFIG_NAND */ 66 #define MTDPARTS_DEFAULT 67 #endif /* CONFIG_NAND */ 68 69 /* Board NAND Info. */ 70 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 71 /* to access nand */ 72 /* Environment information */ 73 #define CONFIG_EXTRA_ENV_SETTINGS \ 74 DEFAULT_LINUX_BOOT_ENV \ 75 "bootdir=/boot\0" \ 76 "bootfile=zImage\0" \ 77 "usbtty=cdc_acm\0" \ 78 "console=ttyO2,115200n8\0" \ 79 "mpurate=auto\0" \ 80 "optargs=\0" \ 81 "vram=12M\0" \ 82 "dvimode=1024x768MR-16@60\0" \ 83 "defaultdisplay=dvi\0" \ 84 "mmcdev=0\0" \ 85 "mmcroot=/dev/mmcblk0p2 rw\0" \ 86 "mmcrootfstype=ext4 rootwait\0" \ 87 "nandroot=ubi0:rootfs ubi.mtd=4\0" \ 88 "nandrootfstype=ubifs\0" \ 89 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 90 "mmcargs=setenv bootargs console=${console} " \ 91 "${optargs} " \ 92 "mpurate=${mpurate} " \ 93 "vram=${vram} " \ 94 "omapfb.mode=dvi:${dvimode} " \ 95 "omapdss.def_disp=${defaultdisplay} " \ 96 "root=${mmcroot} " \ 97 "rootfstype=${mmcrootfstype}\0" \ 98 "nandargs=setenv bootargs console=${console} " \ 99 "${optargs} " \ 100 "mpurate=${mpurate} " \ 101 "vram=${vram} " \ 102 "omapfb.mode=dvi:${dvimode} " \ 103 "omapdss.def_disp=${defaultdisplay} " \ 104 "root=${nandroot} " \ 105 "rootfstype=${nandrootfstype}\0" \ 106 "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 107 "bootscript=echo Running boot script from mmc ...; " \ 108 "source ${loadaddr}\0" \ 109 "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ 110 "importbootenv=echo Importing environment from mmc ...; " \ 111 "env import -t ${loadaddr} ${filesize}\0" \ 112 "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \ 113 "mmcboot=echo Booting from mmc...; " \ 114 "run mmcargs; " \ 115 "bootm ${loadaddr}\0" \ 116 "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \ 117 "loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \ 118 "loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \ 119 "loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \ 120 "mmcbootfdt=echo Booting with DT from mmc ...; " \ 121 "run mmcargs; " \ 122 "bootz ${loadaddr} - ${fdtaddr}\0" \ 123 "nandboot=echo Booting from nand ...; " \ 124 "run nandargs; " \ 125 "if nand read ${loadaddr} linux; then " \ 126 "bootm ${loadaddr};" \ 127 "fi;\0" \ 128 "nanddtsboot=echo Booting from nand with DTS...; " \ 129 "run nandargs; " \ 130 "ubi part rootfs; "\ 131 "ubifsmount ubi0:rootfs; "\ 132 "run loadubifdt; "\ 133 "run loadubizimage; "\ 134 "bootz ${loadaddr} - ${fdtaddr}\0" \ 135 136 #define CONFIG_BOOTCOMMAND \ 137 "mmc dev ${mmcdev}; if mmc rescan; then " \ 138 "if run loadbootscript; then " \ 139 "run bootscript; " \ 140 "fi;" \ 141 "if run loadbootenv; then " \ 142 "echo Loaded environment from ${bootenv};" \ 143 "run importbootenv;" \ 144 "fi;" \ 145 "if test -n $uenvcmd; then " \ 146 "echo Running uenvcmd ...;" \ 147 "run uenvcmd;" \ 148 "fi;" \ 149 "if run loaduimage; then " \ 150 "run mmcboot;" \ 151 "fi;" \ 152 "if run loadzimage; then " \ 153 "if test -z \"${fdtfile}\"; then " \ 154 "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ 155 "fi;" \ 156 "if run loadfdt; then " \ 157 "run mmcbootfdt;" \ 158 "fi;" \ 159 "fi;" \ 160 "fi;" \ 161 "run nandboot; " \ 162 "if test -z \"${fdtfile}\"; then "\ 163 "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ 164 "fi;" \ 165 "run nanddtsboot; " \ 166 167 /* memtest works on */ 168 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 169 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 170 0x01F00000) /* 31MB */ 171 172 /* FLASH and environment organization */ 173 #if defined(CONFIG_NAND) 174 #define CONFIG_SYS_FLASH_BASE NAND_BASE 175 #endif 176 177 /* Monitor at start of flash */ 178 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 179 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 180 181 #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ 182 #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ 183 184 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 185 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 186 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 187 188 /* Configure SMSC9211 ethernet */ 189 #if defined(CONFIG_CMD_NET) 190 #define CONFIG_SMC911X 191 #define CONFIG_SMC911X_32_BIT 192 #define CONFIG_SMC911X_BASE 0x2C000000 193 #endif /* (CONFIG_CMD_NET) */ 194 195 /* Initial RAM setup */ 196 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 197 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 198 199 /* NAND boot config */ 200 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 201 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 202 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 203 #define CONFIG_SYS_NAND_PAGE_COUNT 64 204 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 205 #define CONFIG_SYS_NAND_OOBSIZE 64 206 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 207 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 208 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ 209 13, 14, 16, 17, 18, 19, 20, 21, 22, \ 210 23, 24, 25, 26, 27, 28, 30, 31, 32, \ 211 33, 34, 35, 36, 37, 38, 39, 40, 41, \ 212 42, 44, 45, 46, 47, 48, 49, 50, 51, \ 213 52, 53, 54, 55, 56} 214 #define CONFIG_SYS_NAND_ECCSIZE 512 215 #define CONFIG_SYS_NAND_ECCBYTES 13 216 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW 217 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 218 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 219 /* NAND: SPL falcon mode configs */ 220 #ifdef CONFIG_SPL_OS_BOOT 221 #define CONFIG_CMD_SPL_NAND_OFS 0x240000 222 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 223 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 224 #endif 225 226 #endif /* __CONFIG_H */ 227