1 /*
2  * Configuration settings for the Gumstix Overo board.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9 
10 /*
11  * High Level Configuration Options
12  */
13 #define CONFIG_OMAP				/* in a TI OMAP core */
14 #define CONFIG_OMAP34XX				/* which is a 34XX */
15 #define CONFIG_OMAP3_OVERO			/* working with overo */
16 #define CONFIG_OMAP_GPIO
17 #define CONFIG_OMAP_COMMON
18 
19 #define CONFIG_SDRC				/* The chip has SDRC controller */
20 
21 #include <asm/arch/cpu.h>			/* get chip and board defs */
22 #include <asm/arch/omap3.h>
23 
24 /*
25  * Display CPU and Board information
26  */
27 #define CONFIG_DISPLAY_CPUINFO
28 #define CONFIG_DISPLAY_BOARDINFO
29 
30 /* Clock Defines */
31 #define V_OSCK			26000000	/* Clock output from T2 */
32 #define V_SCLK			(V_OSCK >> 1)
33 
34 #define CONFIG_MISC_INIT_R
35 
36 #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
37 #define CONFIG_SETUP_MEMORY_TAGS
38 #define CONFIG_INITRD_TAG
39 #define CONFIG_REVISION_TAG
40 
41 #define CONFIG_OF_LIBFDT
42 
43 /*
44  * Size of malloc() pool
45  */
46 #define CONFIG_ENV_SIZE		(128 << 10)	/* 128 KiB */
47 						/* Sector */
48 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + (128 << 10))
49 
50 /*
51  * Hardware drivers
52  */
53 
54 /*
55  * NS16550 Configuration
56  */
57 #define V_NS16550_CLK		48000000	/* 48MHz (APLL96/2) */
58 
59 #define CONFIG_SYS_NS16550
60 #define CONFIG_SYS_NS16550_SERIAL
61 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
62 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
63 
64 /*
65  * select serial console configuration
66  */
67 #define CONFIG_CONS_INDEX		3
68 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
69 #define CONFIG_SERIAL3			3
70 
71 /* allow to overwrite serial and ethaddr */
72 #define CONFIG_ENV_OVERWRITE
73 #define CONFIG_BAUDRATE			115200
74 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
75 					115200}
76 #define CONFIG_GENERIC_MMC
77 #define CONFIG_MMC
78 #define CONFIG_OMAP_HSMMC
79 #define CONFIG_DOS_PARTITION
80 
81 /* commands to include */
82 #include <config_cmd_default.h>
83 
84 #define CONFIG_CMD_CACHE
85 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
86 #define CONFIG_CMD_FAT		/* FAT support			*/
87 #define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
88 
89 #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
90 #define CONFIG_CMD_MMC		/* MMC support			*/
91 #define CONFIG_CMD_NAND		/* NAND support			*/
92 
93 #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
94 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
95 #undef CONFIG_CMD_IMI		/* iminfo			*/
96 #undef CONFIG_CMD_IMLS		/* List all found images	*/
97 #undef CONFIG_CMD_NFS		/* NFS support			*/
98 #define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
99 
100 #define CONFIG_SYS_NO_FLASH
101 #define CONFIG_HARD_I2C
102 #define CONFIG_SYS_I2C_SPEED		100000
103 #define CONFIG_SYS_I2C_SLAVE		1
104 #define CONFIG_I2C_MULTI_BUS
105 #define CONFIG_DRIVER_OMAP34XX_I2C
106 
107 /*
108  * TWL4030
109  */
110 #define CONFIG_TWL4030_POWER
111 #define CONFIG_TWL4030_LED
112 
113 /*
114  * Board NAND Info.
115  */
116 #define CONFIG_SYS_NAND_QUIET_TEST
117 #define CONFIG_NAND_OMAP_GPMC
118 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
119 							/* to access nand */
120 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
121 							/* to access nand */
122 							/* at CS0 */
123 #define GPMC_NAND_ECC_LP_x16_LAYOUT
124 
125 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
126 						/* devices */
127 #define CONFIG_JFFS2_NAND
128 /* nand device jffs2 lives on */
129 #define CONFIG_JFFS2_DEV		"nand0"
130 /* start of jffs2 partition */
131 #define CONFIG_JFFS2_PART_OFFSET	0x680000
132 #define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
133 							/* partition */
134 
135 /* Environment information */
136 #define CONFIG_BOOTDELAY		5
137 
138 #define CONFIG_EXTRA_ENV_SETTINGS \
139 	"loadaddr=0x82000000\0" \
140 	"console=ttyO2,115200n8\0" \
141 	"mpurate=500\0" \
142 	"optargs=\0" \
143 	"vram=12M\0" \
144 	"dvimode=1024x768MR-16@60\0" \
145 	"defaultdisplay=dvi\0" \
146 	"mmcdev=0\0" \
147 	"mmcroot=/dev/mmcblk0p2 rw\0" \
148 	"mmcrootfstype=ext3 rootwait\0" \
149 	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
150 	"nandrootfstype=ubifs\0" \
151 	"mmcargs=setenv bootargs console=${console} " \
152 		"${optargs} " \
153 		"mpurate=${mpurate} " \
154 		"vram=${vram} " \
155 		"omapfb.mode=dvi:${dvimode} " \
156 		"omapdss.def_disp=${defaultdisplay} " \
157 		"root=${mmcroot} " \
158 		"rootfstype=${mmcrootfstype}\0" \
159 	"nandargs=setenv bootargs console=${console} " \
160 		"${optargs} " \
161 		"mpurate=${mpurate} " \
162 		"vram=${vram} " \
163 		"omapfb.mode=dvi:${dvimode} " \
164 		"omapdss.def_disp=${defaultdisplay} " \
165 		"root=${nandroot} " \
166 		"rootfstype=${nandrootfstype}\0" \
167 	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
168 	"bootscript=echo Running bootscript from mmc ...; " \
169 		"source ${loadaddr}\0" \
170 	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
171 	"mmcboot=echo Booting from mmc ...; " \
172 		"run mmcargs; " \
173 		"bootm ${loadaddr}\0" \
174 	"nandboot=echo Booting from nand ...; " \
175 		"run nandargs; " \
176 		"nand read ${loadaddr} 280000 400000; " \
177 		"bootm ${loadaddr}\0" \
178 
179 #define CONFIG_BOOTCOMMAND \
180 	"mmc dev ${mmcdev}; if mmc rescan; then " \
181 		"if run loadbootscript; then " \
182 			"run bootscript; " \
183 		"else " \
184 			"if run loaduimage; then " \
185 				"run mmcboot; " \
186 			"else run nandboot; " \
187 			"fi; " \
188 		"fi; " \
189 	"else run nandboot; fi"
190 
191 #define CONFIG_AUTO_COMPLETE	1
192 /*
193  * Miscellaneous configurable options
194  */
195 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
196 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
197 #define CONFIG_SYS_PROMPT		"Overo # "
198 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
199 /* Print Buffer Size */
200 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
201 					sizeof(CONFIG_SYS_PROMPT) + 16)
202 #define CONFIG_SYS_MAXARGS		16	/* max number of command */
203 						/* args */
204 /* Boot Argument Buffer Size */
205 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
206 /* memtest works on */
207 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
208 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
209 					0x01F00000) /* 31MB */
210 
211 #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
212 								/* address */
213 /*
214  * OMAP3 has 12 GP timers, they can be driven by the system clock
215  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
216  * This rate is divided by a local divisor.
217  */
218 #define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
219 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
220 #define CONFIG_SYS_HZ			1000
221 
222 /*-----------------------------------------------------------------------
223  * Physical Memory Map
224  */
225 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
226 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
227 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
228 
229 /*-----------------------------------------------------------------------
230  * FLASH and environment organization
231  */
232 
233 /* **** PISMO SUPPORT *** */
234 
235 /* Configure the PISMO */
236 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
237 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
238 
239 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
240 
241 #if defined(CONFIG_CMD_NAND)
242 #define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
243 #endif
244 
245 /* Monitor at start of flash */
246 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
247 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
248 
249 #define CONFIG_ENV_IS_IN_NAND
250 #define ONENAND_ENV_OFFSET		0x240000 /* environment starts here */
251 #define SMNAND_ENV_OFFSET		0x240000 /* environment starts here */
252 
253 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
254 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
255 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
256 
257 #if defined(CONFIG_CMD_NET)
258 /*----------------------------------------------------------------------------
259  * SMSC9211 Ethernet from SMSC9118 family
260  *----------------------------------------------------------------------------
261  */
262 
263 #define CONFIG_SMC911X
264 #define CONFIG_SMC911X_32_BIT
265 #define CONFIG_SMC911X_BASE		0x2C000000
266 
267 #endif /* (CONFIG_CMD_NET) */
268 
269 /*
270  * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
271  * and older u-boot.bin with the new U-Boot SPL.
272  */
273 #define CONFIG_SYS_TEXT_BASE		0x80008000
274 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
275 #define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
276 #define CONFIG_SYS_INIT_RAM_SIZE	0x800
277 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
278 					 CONFIG_SYS_INIT_RAM_SIZE - \
279 					 GENERATED_GBL_DATA_SIZE)
280 
281 #define CONFIG_SYS_CACHELINE_SIZE	64
282 
283 /* Defines for SPL */
284 #define CONFIG_SPL
285 #define CONFIG_SPL_FRAMEWORK
286 #define CONFIG_SPL_NAND_SIMPLE
287 #define CONFIG_SPL_TEXT_BASE		0x40200800
288 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
289 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
290 
291 /* move malloc and bss high to prevent clashing with the main image */
292 #define CONFIG_SYS_SPL_MALLOC_START	0x87000000
293 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
294 #define CONFIG_SPL_BSS_START_ADDR	0x87080000	/* end of minimum RAM */
295 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
296 
297 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
298 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
299 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
300 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
301 
302 #define CONFIG_SPL_BOARD_INIT
303 #define CONFIG_SPL_LIBCOMMON_SUPPORT
304 #define CONFIG_SPL_LIBDISK_SUPPORT
305 #define CONFIG_SPL_I2C_SUPPORT
306 #define CONFIG_SPL_LIBGENERIC_SUPPORT
307 #define CONFIG_SPL_MMC_SUPPORT
308 #define CONFIG_SPL_FAT_SUPPORT
309 #define CONFIG_SPL_SERIAL_SUPPORT
310 #define CONFIG_SPL_NAND_SUPPORT
311 #define CONFIG_SPL_NAND_BASE
312 #define CONFIG_SPL_NAND_DRIVERS
313 #define CONFIG_SPL_NAND_ECC
314 #define CONFIG_SPL_GPIO_SUPPORT
315 #define CONFIG_SPL_POWER_SUPPORT
316 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
317 
318 /* NAND boot config */
319 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
320 #define CONFIG_SYS_NAND_PAGE_COUNT	64
321 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
322 #define CONFIG_SYS_NAND_OOBSIZE		64
323 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
324 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
325 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
326 						10, 11, 12, 13}
327 #define CONFIG_SYS_NAND_ECCSIZE		512
328 #define CONFIG_SYS_NAND_ECCBYTES	3
329 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
330 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
331 
332 #endif				/* __CONFIG_H */
333