1 /* 2 * (C) Copyright 2011 Logic Product Development <www.logicpd.com> 3 * Peter Barada <peter.barada@logicpd.com> 4 * 5 * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo 6 * reference boards. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* 15 * High Level Configuration Options 16 */ 17 #define CONFIG_OMAP /* in a TI OMAP core */ 18 #define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ 19 #define CONFIG_OMAP_GPIO 20 #define CONFIG_OMAP_COMMON 21 /* Common ARM Erratas */ 22 #define CONFIG_ARM_ERRATA_454179 23 #define CONFIG_ARM_ERRATA_430973 24 #define CONFIG_ARM_ERRATA_621766 25 26 #define CONFIG_SYS_TEXT_BASE 0x80400000 27 28 #define CONFIG_SDRC /* The chip has SDRC controller */ 29 30 #include <asm/arch/cpu.h> /* get chip and board defs */ 31 #include <asm/arch/omap.h> 32 33 /* 34 * Display CPU and Board information 35 */ 36 #define CONFIG_DISPLAY_CPUINFO 37 #define CONFIG_DISPLAY_BOARDINFO 38 39 /* Clock Defines */ 40 #define V_OSCK 26000000 /* Clock output from T2 */ 41 #define V_SCLK (V_OSCK >> 1) 42 43 #define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */ 44 45 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 46 #define CONFIG_SETUP_MEMORY_TAGS 47 #define CONFIG_INITRD_TAG 48 #define CONFIG_REVISION_TAG 49 50 #define CONFIG_CMDLINE_EDITING /* cmd line edit/history */ 51 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress w/no delay */ 52 53 /* 54 * Size of malloc() pool 55 */ 56 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 57 /* Sector */ 58 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 59 60 /* 61 * Hardware drivers 62 */ 63 64 /* 65 * NS16550 Configuration 66 */ 67 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 68 69 #define CONFIG_SYS_NS16550 70 #define CONFIG_SYS_NS16550_SERIAL 71 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 72 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 73 74 /* 75 * select serial console configuration 76 */ 77 #define CONFIG_CONS_INDEX 1 78 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 79 #define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */ 80 81 /* allow to overwrite serial and ethaddr */ 82 #define CONFIG_ENV_OVERWRITE 83 #define CONFIG_BAUDRATE 115200 84 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 85 115200} 86 #define CONFIG_GENERIC_MMC 87 #define CONFIG_MMC 88 #define CONFIG_OMAP_HSMMC 89 #define CONFIG_DOS_PARTITION 90 91 /* commands to include */ 92 #define CONFIG_CMD_CACHE 93 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 94 #define CONFIG_CMD_FAT /* FAT support */ 95 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 96 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 97 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 98 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 99 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(x-loader),"\ 100 "1920k(u-boot),128k(u-boot-env),"\ 101 "4m(kernel),-(fs)" 102 103 #define CONFIG_CMD_I2C /* I2C serial bus support */ 104 #define CONFIG_CMD_MMC /* MMC support */ 105 #define CONFIG_CMD_NAND /* NAND support */ 106 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ 107 #define CONFIG_CMD_PING 108 #define CONFIG_CMD_DHCP 109 110 #define CONFIG_SYS_NO_FLASH 111 112 /* 113 * I2C 114 */ 115 #define CONFIG_SYS_I2C 116 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 117 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 118 #define CONFIG_SYS_I2C_OMAP34XX 119 120 /* 121 * TWL4030 122 */ 123 #define CONFIG_TWL4030_POWER 124 125 /* 126 * Board NAND Info. 127 */ 128 #define CONFIG_SYS_NAND_QUIET_TEST 129 #define CONFIG_NAND_OMAP_GPMC 130 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 131 /* to access nand */ 132 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 133 /* to access nand at */ 134 /* CS0 */ 135 136 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 137 /* NAND devices */ 138 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 139 #define CONFIG_JFFS2_NAND 140 /* nand device jffs2 lives on */ 141 #define CONFIG_JFFS2_DEV "nand0" 142 /* start of jffs2 partition */ 143 #define CONFIG_JFFS2_PART_OFFSET 0x680000 144 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 145 /* partition */ 146 147 /* Environment information */ 148 #define CONFIG_BOOTDELAY 2 149 150 /* 151 * PREBOOT assumes the 4.3" display is attached. User can interrupt 152 * and modify display variable to suit their needs. 153 */ 154 #define CONFIG_PREBOOT \ 155 "echo ======================NOTICE============================;"\ 156 "echo \"The u-boot environment is not set.\";" \ 157 "echo \"If using a display a valid display varible for your panel\";" \ 158 "echo \"needs to be set.\";" \ 159 "echo \"Valid display options are:\";" \ 160 "echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \ 161 "echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC\";" \ 162 "echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\";" \ 163 "echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\";" \ 164 "echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)\";" \ 165 "echo \" vga[-dvi or -hdmi] LCD VGA 640x480\";" \ 166 "echo \" svga[-dvi or -hdmi] LCD SVGA 800x600\";" \ 167 "echo \" xga[-dvi or -hdmi] LCD XGA 1024x768\";" \ 168 "echo \" 720p[-dvi or -hdmi] LCD 720P 1280x720\";" \ 169 "echo \"Defaulting to 4.3 LCD panel (display=15).\";" \ 170 "setenv display 15;" \ 171 "setenv preboot;" \ 172 "saveenv;" 173 174 175 #define CONFIG_EXTRA_ENV_SETTINGS \ 176 "loadaddr=0x81000000\0" \ 177 "bootfile=uImage\0" \ 178 "mtdids=" MTDIDS_DEFAULT "\0" \ 179 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 180 "mmcdev=0\0" \ 181 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ 182 "if run loadbootscript; then " \ 183 "run bootscript; " \ 184 "else " \ 185 "run defaultboot;" \ 186 "fi; " \ 187 "else run defaultboot; fi\0" \ 188 "defaultboot=run mmcramboot\0" \ 189 "consoledevice=ttyO0\0" \ 190 "display=15\0" \ 191 "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \ 192 "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \ 193 "rotation=0\0" \ 194 "vrfb_arg=if itest ${rotation} -ne 0; then " \ 195 "setenv bootargs ${bootargs} omapfb.vrfb=y " \ 196 "omapfb.rotate=${rotation}; " \ 197 "fi\0" \ 198 "otherbootargs=ignore_loglevel early_printk no_console_suspend\0" \ 199 "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \ 200 "common_bootargs=setenv bootargs ${bootargs} display=${display} " \ 201 "${otherbootargs};" \ 202 "run addmtdparts; " \ 203 "run vrfb_arg\0" \ 204 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 205 "bootscript=echo 'Running bootscript from mmc ...'; " \ 206 "source ${loadaddr}\0" \ 207 "loaduimage=mmc rescan ${mmcdev}; " \ 208 "fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ 209 "ramdisksize=64000\0" \ 210 "ramdiskaddr=0x82000000\0" \ 211 "ramdiskimage=rootfs.ext2.gz.uboot\0" \ 212 "ramargs=run setconsole; setenv bootargs console=${console} " \ 213 "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \ 214 "mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \ 215 "run ramargs; " \ 216 "run common_bootargs; " \ 217 "run dump_bootargs; " \ 218 "run loaduimage; " \ 219 "fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}; "\ 220 "bootm ${loadaddr} ${ramdiskaddr}\0" \ 221 "ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \ 222 "run ramargs; " \ 223 "run common_bootargs; " \ 224 "run dump_bootargs; " \ 225 "tftpboot ${loadaddr} ${bootfile}; "\ 226 "tftpboot ${ramdiskaddr} ${ramdiskimage}; "\ 227 "bootm ${loadaddr} ${ramdiskaddr}\0" 228 229 #define CONFIG_BOOTCOMMAND \ 230 "run autoboot" 231 232 #define CONFIG_AUTO_COMPLETE 233 /* 234 * Miscellaneous configurable options 235 */ 236 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 237 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 238 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 239 /* Print Buffer Size */ 240 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 241 sizeof(CONFIG_SYS_PROMPT) + 16) 242 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 243 /* Boot Argument Buffer Size */ 244 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 245 /* memtest works on */ 246 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 247 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 248 0x01F00000) /* 31MB */ 249 250 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 251 /* address */ 252 253 /* 254 * OMAP3 has 12 GP timers, they can be driven by the system clock 255 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 256 * This rate is divided by a local divisor. 257 */ 258 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 259 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 260 261 /* 262 * Physical Memory Map 263 */ 264 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 265 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 266 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 267 268 /* 269 * FLASH and environment organization 270 */ 271 272 /* **** PISMO SUPPORT *** */ 273 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 274 275 #if defined(CONFIG_CMD_NAND) 276 #define CONFIG_SYS_FLASH_BASE NAND_BASE 277 #elif defined(CONFIG_CMD_ONENAND) 278 #define CONFIG_SYS_FLASH_BASE ONENAND_MAP 279 #endif 280 281 /* Monitor at start of flash */ 282 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 283 284 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 285 286 #if defined(CONFIG_CMD_NAND) 287 #define CONFIG_NAND_OMAP_GPMC 288 #define CONFIG_ENV_IS_IN_NAND 289 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 290 #endif 291 292 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 293 #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET 294 295 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 296 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 297 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 298 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 299 CONFIG_SYS_INIT_RAM_SIZE - \ 300 GENERATED_GBL_DATA_SIZE) 301 302 /* 303 * SMSC922x Ethernet 304 */ 305 #if defined(CONFIG_CMD_NET) 306 307 #define CONFIG_SMC911X 308 #define CONFIG_SMC911X_16_BIT 309 #define CONFIG_SMC911X_BASE 0x08000000 310 311 #endif /* (CONFIG_CMD_NET) */ 312 313 /* 314 * BOOTP fields 315 */ 316 317 #define CONFIG_BOOTP_SUBNETMASK 0x00000001 318 #define CONFIG_BOOTP_GATEWAY 0x00000002 319 #define CONFIG_BOOTP_HOSTNAME 0x00000004 320 #define CONFIG_BOOTP_BOOTPATH 0x00000010 321 322 #endif /* __CONFIG_H */ 323