1 /* 2 * (C) Copyright 2011 Logic Product Development <www.logicpd.com> 3 * Peter Barada <peter.barada@logicpd.com> 4 * 5 * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo 6 * reference boards. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* 15 * High Level Configuration Options 16 */ 17 #define CONFIG_OMAP /* in a TI OMAP core */ 18 #define CONFIG_OMAP34XX /* which is a 34XX */ 19 #define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ 20 #define CONFIG_OMAP_GPIO 21 #define CONFIG_OMAP_COMMON 22 23 #define CONFIG_SYS_TEXT_BASE 0x80400000 24 25 #define CONFIG_SDRC /* The chip has SDRC controller */ 26 27 #include <asm/arch/cpu.h> /* get chip and board defs */ 28 #include <asm/arch/omap3.h> 29 30 /* 31 * Display CPU and Board information 32 */ 33 #define CONFIG_DISPLAY_CPUINFO 34 #define CONFIG_DISPLAY_BOARDINFO 35 36 /* Clock Defines */ 37 #define V_OSCK 26000000 /* Clock output from T2 */ 38 #define V_SCLK (V_OSCK >> 1) 39 40 #define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */ 41 42 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 43 #define CONFIG_SETUP_MEMORY_TAGS 44 #define CONFIG_INITRD_TAG 45 #define CONFIG_REVISION_TAG 46 47 #define CONFIG_CMDLINE_EDITING /* cmd line edit/history */ 48 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress w/no delay */ 49 50 /* 51 * Size of malloc() pool 52 */ 53 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 54 /* Sector */ 55 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 56 57 /* 58 * Hardware drivers 59 */ 60 61 /* 62 * NS16550 Configuration 63 */ 64 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 65 66 #define CONFIG_SYS_NS16550 67 #define CONFIG_SYS_NS16550_SERIAL 68 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 69 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 70 71 /* 72 * select serial console configuration 73 */ 74 #define CONFIG_CONS_INDEX 1 75 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 76 #define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */ 77 78 /* allow to overwrite serial and ethaddr */ 79 #define CONFIG_ENV_OVERWRITE 80 #define CONFIG_BAUDRATE 115200 81 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 82 115200} 83 #define CONFIG_GENERIC_MMC 84 #define CONFIG_MMC 85 #define CONFIG_OMAP_HSMMC 86 #define CONFIG_DOS_PARTITION 87 88 /* commands to include */ 89 #include <config_cmd_default.h> 90 91 #define CONFIG_CMD_CACHE 92 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 93 #define CONFIG_CMD_FAT /* FAT support */ 94 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 95 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 96 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 97 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 98 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(x-loader),"\ 99 "1920k(u-boot),128k(u-boot-env),"\ 100 "4m(kernel),-(fs)" 101 102 #define CONFIG_CMD_I2C /* I2C serial bus support */ 103 #define CONFIG_CMD_MMC /* MMC support */ 104 #define CONFIG_CMD_NAND /* NAND support */ 105 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ 106 #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 107 #define CONFIG_CMD_PING 108 #define CONFIG_CMD_DHCP 109 #define CONFIG_CMD_SETEXPR /* Evaluate expressions */ 110 111 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 112 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 113 #undef CONFIG_CMD_IMI /* iminfo */ 114 #undef CONFIG_CMD_IMLS /* List all found images */ 115 116 #define CONFIG_SYS_NO_FLASH 117 118 /* 119 * I2C 120 */ 121 #define CONFIG_HARD_I2C 122 #define CONFIG_DRIVER_OMAP34XX_I2C 123 124 #define CONFIG_SYS_I2C_SPEED 100000 125 #define CONFIG_SYS_I2C_SLAVE 1 126 #define CONFIG_I2C_MULTI_BUS 127 128 /* 129 * TWL4030 130 */ 131 #define CONFIG_TWL4030_POWER 132 133 /* 134 * Board NAND Info. 135 */ 136 #define CONFIG_SYS_NAND_QUIET_TEST 137 #define CONFIG_NAND_OMAP_GPMC 138 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 139 /* to access nand */ 140 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 141 /* to access nand at */ 142 /* CS0 */ 143 144 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 145 /* NAND devices */ 146 #define CONFIG_JFFS2_NAND 147 /* nand device jffs2 lives on */ 148 #define CONFIG_JFFS2_DEV "nand0" 149 /* start of jffs2 partition */ 150 #define CONFIG_JFFS2_PART_OFFSET 0x680000 151 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 152 /* partition */ 153 154 /* Environment information */ 155 #define CONFIG_BOOTDELAY 2 156 157 /* 158 * PREBOOT assumes the 4.3" display is attached. User can interrupt 159 * and modify display variable to suit their needs. 160 */ 161 #define CONFIG_PREBOOT \ 162 "echo ======================NOTICE============================;"\ 163 "echo \"The u-boot environment is not set.\";" \ 164 "echo \"If using a display a valid display varible for your panel\";" \ 165 "echo \"needs to be set.\";" \ 166 "echo \"Valid display options are:\";" \ 167 "echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \ 168 "echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC\";" \ 169 "echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\";" \ 170 "echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\";" \ 171 "echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)\";" \ 172 "echo \" vga[-dvi or -hdmi] LCD VGA 640x480\";" \ 173 "echo \" svga[-dvi or -hdmi] LCD SVGA 800x600\";" \ 174 "echo \" xga[-dvi or -hdmi] LCD XGA 1024x768\";" \ 175 "echo \" 720p[-dvi or -hdmi] LCD 720P 1280x720\";" \ 176 "echo \"Defaulting to 4.3 LCD panel (display=15).\";" \ 177 "setenv display 15;" \ 178 "setenv preboot;" \ 179 "saveenv;" 180 181 182 #define CONFIG_EXTRA_ENV_SETTINGS \ 183 "loadaddr=0x81000000\0" \ 184 "bootfile=uImage\0" \ 185 "mtdids=" MTDIDS_DEFAULT "\0" \ 186 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 187 "mmcdev=0\0" \ 188 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ 189 "if run loadbootscript; then " \ 190 "run bootscript; " \ 191 "else " \ 192 "run defaultboot;" \ 193 "fi; " \ 194 "else run defaultboot; fi\0" \ 195 "defaultboot=run mmcramboot\0" \ 196 "consoledevice=ttyO0\0" \ 197 "display=15\0" \ 198 "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \ 199 "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \ 200 "rotation=0\0" \ 201 "vrfb_arg=if itest ${rotation} -ne 0; then " \ 202 "setenv bootargs ${bootargs} omapfb.vrfb=y " \ 203 "omapfb.rotate=${rotation}; " \ 204 "fi\0" \ 205 "otherbootargs=ignore_loglevel early_printk no_console_suspend\0" \ 206 "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \ 207 "common_bootargs=setenv bootargs ${bootargs} display=${display} " \ 208 "${otherbootargs};" \ 209 "run addmtdparts; " \ 210 "run vrfb_arg\0" \ 211 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 212 "bootscript=echo 'Running bootscript from mmc ...'; " \ 213 "source ${loadaddr}\0" \ 214 "loaduimage=mmc rescan ${mmcdev}; " \ 215 "fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ 216 "ramdisksize=64000\0" \ 217 "ramdiskaddr=0x82000000\0" \ 218 "ramdiskimage=rootfs.ext2.gz.uboot\0" \ 219 "ramargs=run setconsole; setenv bootargs console=${console} " \ 220 "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \ 221 "mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \ 222 "run ramargs; " \ 223 "run common_bootargs; " \ 224 "run dump_bootargs; " \ 225 "run loaduimage; " \ 226 "fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}; "\ 227 "bootm ${loadaddr} ${ramdiskaddr}\0" \ 228 "ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \ 229 "run ramargs; " \ 230 "run common_bootargs; " \ 231 "run dump_bootargs; " \ 232 "tftpboot ${loadaddr} ${bootfile}; "\ 233 "tftpboot ${ramdiskaddr} ${ramdiskimage}; "\ 234 "bootm ${loadaddr} ${ramdiskaddr}\0" 235 236 #define CONFIG_BOOTCOMMAND \ 237 "run autoboot" 238 239 #define CONFIG_AUTO_COMPLETE 240 /* 241 * Miscellaneous configurable options 242 */ 243 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 244 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 245 #define CONFIG_SYS_PROMPT "OMAP Logic # " 246 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 247 /* Print Buffer Size */ 248 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 249 sizeof(CONFIG_SYS_PROMPT) + 16) 250 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 251 /* Boot Argument Buffer Size */ 252 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 253 /* memtest works on */ 254 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 255 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 256 0x01F00000) /* 31MB */ 257 258 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 259 /* address */ 260 261 /* 262 * OMAP3 has 12 GP timers, they can be driven by the system clock 263 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 264 * This rate is divided by a local divisor. 265 */ 266 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 267 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 268 269 /* 270 * Physical Memory Map 271 */ 272 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 273 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 274 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 275 276 /* 277 * FLASH and environment organization 278 */ 279 280 /* **** PISMO SUPPORT *** */ 281 282 /* Configure the PISMO */ 283 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 284 285 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 286 287 #if defined(CONFIG_CMD_NAND) 288 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE 289 #elif defined(CONFIG_CMD_ONENAND) 290 #define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE 291 #endif 292 293 /* Monitor at start of flash */ 294 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 295 296 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 297 298 #if defined(CONFIG_CMD_NAND) 299 #define CONFIG_NAND_OMAP_GPMC 300 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 301 #define CONFIG_ENV_IS_IN_NAND 302 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 303 #endif 304 305 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 306 #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET 307 308 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 309 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 310 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 311 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 312 CONFIG_SYS_INIT_RAM_SIZE - \ 313 GENERATED_GBL_DATA_SIZE) 314 315 /* 316 * SMSC922x Ethernet 317 */ 318 #if defined(CONFIG_CMD_NET) 319 320 #define CONFIG_SMC911X 321 #define CONFIG_SMC911X_16_BIT 322 #define CONFIG_SMC911X_BASE 0x08000000 323 324 #endif /* (CONFIG_CMD_NET) */ 325 326 /* 327 * BOOTP fields 328 */ 329 330 #define CONFIG_BOOTP_SUBNETMASK 0x00000001 331 #define CONFIG_BOOTP_GATEWAY 0x00000002 332 #define CONFIG_BOOTP_HOSTNAME 0x00000004 333 #define CONFIG_BOOTP_BOOTPATH 0x00000010 334 335 #endif /* __CONFIG_H */ 336