1 /* 2 * (C) Copyright 2011 Logic Product Development <www.logicpd.com> 3 * Peter Barada <peter.barada@logicpd.com> 4 * 5 * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo 6 * reference boards. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* High Level Configuration Options */ 15 16 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 17 18 #include <configs/ti_omap3_common.h> 19 20 #ifdef CONFIG_SPL_BUILD 21 /* 22 * Disable MMC DM for SPL build and can be re-enabled after adding 23 * DM support in SPL 24 */ 25 #undef CONFIG_DM_MMC 26 #undef CONFIG_DM_MMC_OPS 27 #undef OMAP_HSMMC_USE_GPIO 28 29 /* select serial console configuration for SPL */ 30 #undef CONFIG_CONS_INDEX 31 #define CONFIG_CONS_INDEX 1 32 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 33 #endif 34 35 36 /* 37 * We are only ever GP parts and will utilize all of the "downloaded image" 38 * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in 39 * order to allow for BCH8 to fit in. 40 */ 41 #undef CONFIG_SPL_TEXT_BASE 42 #define CONFIG_SPL_FRAMEWORK 43 #define CONFIG_SPL_TEXT_BASE 0x40200000 44 45 #define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */ 46 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 47 #define CONFIG_SETUP_MEMORY_TAGS 48 #define CONFIG_INITRD_TAG 49 #define CONFIG_REVISION_TAG 50 51 /* Hardware drivers */ 52 53 #define CONFIG_USB_OMAP3 54 55 /* commands to include */ 56 #define CONFIG_CMD_NAND 57 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ 58 59 /* I2C */ 60 #define CONFIG_SYS_I2C_OMAP34XX 61 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */ 62 63 /* USB */ 64 #define CONFIG_USB_MUSB_OMAP2PLUS 65 #define CONFIG_USB_MUSB_PIO_ONLY 66 #define CONFIG_USB_ETHER 67 #define CONFIG_USB_ETHER_RNDIS 68 #define CONFIG_USB_FUNCTION_FASTBOOT 69 #define CONFIG_CMD_FASTBOOT 70 #define CONFIG_ANDROID_BOOT_IMAGE 71 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 72 #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 73 74 /* TWL4030 */ 75 #define CONFIG_TWL4030_PWM 76 #define CONFIG_TWL4030_USB 77 78 /* Board NAND Info. */ 79 #ifdef CONFIG_NAND 80 #define CONFIG_NAND_OMAP_GPMC 81 82 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 83 /* to access nand */ 84 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 85 /* NAND devices */ 86 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 87 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 88 #define CONFIG_SYS_NAND_PAGE_COUNT 64 89 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 90 #define CONFIG_SYS_NAND_OOBSIZE 64 91 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 92 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 93 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ 94 13, 14, 16, 17, 18, 19, 20, 21, 22, \ 95 23, 24, 25, 26, 27, 28, 30, 31, 32, \ 96 33, 34, 35, 36, 37, 38, 39, 40, 41, \ 97 42, 44, 45, 46, 47, 48, 49, 50, 51, \ 98 52, 53, 54, 55, 56} 99 100 #define CONFIG_SYS_NAND_ECCSIZE 512 101 #define CONFIG_SYS_NAND_ECCBYTES 13 102 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW 103 #define CONFIG_BCH 104 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 105 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 106 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 107 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 108 #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ 109 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 110 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"\ 111 "512k(MLO),"\ 112 "1792k(u-boot),"\ 113 "128k(spl-os)," \ 114 "128k(u-boot-env),"\ 115 "6m(kernel),-(fs)" 116 #endif 117 118 /* Environment information */ 119 120 #define CONFIG_PREBOOT \ 121 "setenv preboot;" \ 122 "nand unlock;" \ 123 "saveenv;" 124 125 #define CONFIG_EXTRA_ENV_SETTINGS \ 126 DEFAULT_LINUX_BOOT_ENV \ 127 "mtdids=" MTDIDS_DEFAULT "\0" \ 128 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 129 "mmcdev=0\0" \ 130 "mmcroot=/dev/mmcblk0p2 rw\0" \ 131 "mmcrootfstype=ext4 rootwait\0" \ 132 "nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \ 133 "nandrootfstype=ubifs rootwait\0" \ 134 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ 135 "if run loadbootscript; then " \ 136 "run bootscript; " \ 137 "else " \ 138 "run defaultboot;" \ 139 "fi; " \ 140 "else run defaultboot; fi\0" \ 141 "defaultboot=run mmcramboot\0" \ 142 "consoledevice=ttyO0\0" \ 143 "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \ 144 "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \ 145 "rotation=0\0" \ 146 "vrfb_arg=if itest ${rotation} -ne 0; then " \ 147 "setenv bootargs ${bootargs} omapfb.vrfb=y " \ 148 "omapfb.rotate=${rotation}; " \ 149 "fi\0" \ 150 "optargs=ignore_loglevel early_printk no_console_suspend\0" \ 151 "common_bootargs=run setconsole; setenv bootargs " \ 152 "${bootargs} "\ 153 "console=${console} " \ 154 "${mtdparts} "\ 155 "${optargs}; " \ 156 "run vrfb_arg\0" \ 157 "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 158 "bootscript=echo 'Running bootscript from mmc ...'; " \ 159 "source ${loadaddr}\0" \ 160 "loadimage=mmc rescan; " \ 161 "load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ 162 "ramdisksize=64000\0" \ 163 "ramdiskimage=rootfs.ext2.gz.uboot\0" \ 164 "loadramdisk=mmc rescan; " \ 165 "load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \ 166 "ramargs=setenv bootargs "\ 167 "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \ 168 "mmcargs=setenv bootargs "\ 169 "root=${mmcroot} rootfstype=${mmcrootfstype}\0" \ 170 "nandargs=setenv bootargs "\ 171 "root=${nandroot} " \ 172 "rootfstype=${nandrootfstype}\0" \ 173 "nfsargs=setenv serverip ${tftpserver}; " \ 174 "setenv bootargs root=/dev/nfs " \ 175 "nfsroot=${nfsrootpath} " \ 176 "ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \ 177 "nfsrootpath=/opt/nfs-exports/omap\0" \ 178 "autoload=no\0" \ 179 "loadfdt=mmc rescan; " \ 180 "load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \ 181 "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \ 182 "run mmcargs; " \ 183 "run common_bootargs; " \ 184 "run dump_bootargs; " \ 185 "run loadimage; " \ 186 "run loadfdt;\0 " \ 187 "mmcbootz=setenv bootfile zImage; " \ 188 "run mmcbootcommon; "\ 189 "bootz ${loadaddr} - ${fdtaddr}\0" \ 190 "mmcboot=setenv bootfile uImage; "\ 191 "run mmcbootcommon; "\ 192 "bootm ${loadaddr} - ${fdtaddr}\0" \ 193 "mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \ 194 "run ramargs; " \ 195 "run common_bootargs; " \ 196 "run dump_bootargs; " \ 197 "run loadimage; " \ 198 "run loadfdt; " \ 199 "run loadramdisk\0" \ 200 "mmcramboot=setenv bootfile uImage; " \ 201 "run mmcrambootcommon; " \ 202 "bootm ${loadaddr} ${rdaddr} ${fdtimage}\0" \ 203 "mmcrambootz=setenv bootfile zImage; " \ 204 "run mmcrambootcommon; " \ 205 "bootz ${loadaddr} ${rdaddr} ${fdtimage}\0" \ 206 "tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \ 207 "run ramargs; " \ 208 "run common_bootargs; " \ 209 "run dump_bootargs; " \ 210 "tftpboot ${loadaddr} ${zimage}; " \ 211 "tftpboot ${rdaddr} ${ramdiskimage}; " \ 212 "bootm ${loadaddr} ${rdaddr}\0" \ 213 "tftpbootz=echo 'Booting kernel NFS rootfs...'; " \ 214 "dhcp;" \ 215 "run nfsargs;" \ 216 "run common_bootargs;" \ 217 "run dump_bootargs;" \ 218 "tftpboot $loadaddr zImage;" \ 219 "bootz $loadaddr\0" \ 220 "nandbootcommon=echo 'Booting kernel from NAND...';" \ 221 "nand unlock;" \ 222 "run nandargs;" \ 223 "run common_bootargs;" \ 224 "run dump_bootargs;" \ 225 "nand read ${loadaddr} kernel;" \ 226 "nand read ${fdtaddr} spl-os;\0" \ 227 "nandbootz=run nandbootcommon; "\ 228 "bootz ${loadaddr} - ${fdtaddr}\0"\ 229 "nandboot=run nandbootcommon; "\ 230 "bootm ${loadaddr} - ${fdtaddr}\0"\ 231 232 #define CONFIG_BOOTCOMMAND \ 233 "run autoboot" 234 235 /* Miscellaneous configurable options */ 236 237 /* memtest works on */ 238 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 239 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 240 0x01F00000) /* 31MB */ 241 242 /* FLASH and environment organization */ 243 244 /* **** PISMO SUPPORT *** */ 245 #if defined(CONFIG_CMD_NAND) 246 #define CONFIG_SYS_FLASH_BASE NAND_BASE 247 #endif 248 249 /* Monitor at start of flash */ 250 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 251 252 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 253 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 254 255 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 256 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 257 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 258 259 /* SMSC922x Ethernet */ 260 #if defined(CONFIG_CMD_NET) 261 #define CONFIG_SMC911X 262 #define CONFIG_SMC911X_32_BIT 263 #define CONFIG_SMC911X_BASE 0x08000000 264 #endif /* (CONFIG_CMD_NET) */ 265 266 /* Defines for SPL */ 267 268 #define CONFIG_SPL_OMAP3_ID_NAND 269 270 /* NAND: SPL falcon mode configs */ 271 #ifdef CONFIG_SPL_OS_BOOT 272 #define CONFIG_CMD_SPL_NAND_OFS 0x240000 273 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 274 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 275 #endif 276 277 #endif /* __CONFIG_H */ 278