1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Common configuration settings for IGEP technology based boards
4  *
5  * (C) Copyright 2012
6  * ISEE 2007 SL, <www.iseebcn.com>
7  */
8 
9 #ifndef __IGEP00X0_H
10 #define __IGEP00X0_H
11 
12 #include <configs/ti_omap3_common.h>
13 
14 /*
15  * We are only ever GP parts and will utilize all of the "downloaded image"
16  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
17  */
18 #undef CONFIG_SPL_TEXT_BASE
19 #define CONFIG_SPL_TEXT_BASE		0x40200000
20 
21 #define CONFIG_REVISION_TAG		1
22 
23 /* GPIO banks */
24 #define CONFIG_OMAP3_GPIO_2		/* GPIO32..63   is in GPIO bank 2 */
25 #define CONFIG_OMAP3_GPIO_4		/* GPIO96..127  is in GPIO bank 4 */
26 
27 /* TPS65950 */
28 #define PBIASLITEVMODE1			(1 << 8)
29 
30 /* LED */
31 #define IGEP0020_GPIO_LED		27
32 #define IGEP0030_GPIO_LED		16
33 
34 /* Board and revision detection GPIOs */
35 #define IGEP0030_USB_TRANSCEIVER_RESET		54
36 #define GPIO_IGEP00X0_BOARD_DETECTION		28
37 #define GPIO_IGEP00X0_REVISION_DETECTION	129
38 
39 /* USB device configuration */
40 #define CONFIG_USB_DEVICE		1
41 #define CONFIG_USB_TTY			1
42 
43 /* Change these to suit your needs */
44 #define CONFIG_USBD_VENDORID		0x0451
45 #define CONFIG_USBD_PRODUCTID		0x5678
46 #define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
47 #define CONFIG_USBD_PRODUCT_NAME	"IGEP"
48 
49 #ifndef CONFIG_SPL_BUILD
50 
51 /* Environment */
52 #define ENV_DEVICE_SETTINGS \
53 	"stdin=serial\0" \
54 	"stdout=serial\0" \
55 	"stderr=serial\0"
56 
57 #define MEM_LAYOUT_SETTINGS \
58 	DEFAULT_LINUX_BOOT_ENV \
59 	"scriptaddr=0x87E00000\0" \
60 	"pxefile_addr_r=0x87F00000\0"
61 
62 #define BOOT_TARGET_DEVICES(func) \
63 	func(MMC, mmc, 0)
64 
65 #include <config_distro_bootcmd.h>
66 
67 #define ENV_FINDFDT \
68 	"findfdt="\
69 		"if test ${board_name} = igep0020; then " \
70 			"if test ${board_rev} = F; then " \
71 				"setenv fdtfile omap3-igep0020-rev-f.dtb; " \
72 			"else " \
73 				"setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
74 		"if test ${board_name} = igep0030; then " \
75 			"if test ${board_rev} = G; then " \
76 				"setenv fdtfile omap3-igep0030-rev-g.dtb; " \
77 			"else " \
78 				"setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
79 		"if test ${fdtfile} = ''; then " \
80 			"echo WARNING: Could not determine device tree to use; fi; \0"
81 
82 #define CONFIG_EXTRA_ENV_SETTINGS \
83 	ENV_FINDFDT \
84 	ENV_DEVICE_SETTINGS \
85 	MEM_LAYOUT_SETTINGS \
86 	BOOTENV
87 
88 #endif
89 
90 #define CONFIG_SYS_MTDPARTS_RUNTIME
91 
92 /* OneNAND config */
93 #define CONFIG_USE_ONENAND_BOARD_INIT
94 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
95 #define CONFIG_SYS_ONENAND_BLOCK_SIZE	(128*1024)
96 
97 /* NAND config */
98 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
99 #define CONFIG_SYS_NAND_PAGE_COUNT	64
100 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
101 #define CONFIG_SYS_NAND_OOBSIZE		64
102 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
103 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
104 #define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, \
105 					 10, 11, 12, 13, 14, 15, 16, 17, \
106 					 18, 19, 20, 21, 22, 23, 24, 25, \
107 					 26, 27, 28, 29, 30, 31, 32, 33, \
108 					 34, 35, 36, 37, 38, 39, 40, 41, \
109 					 42, 43, 44, 45, 46, 47, 48, 49, \
110 					 50, 51, 52, 53, 54, 55, 56, 57, }
111 #define CONFIG_SYS_NAND_ECCSIZE		512
112 #define CONFIG_SYS_NAND_ECCBYTES	14
113 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
114 
115 /* UBI configuration */
116 #define CONFIG_SPL_UBI			1
117 #define CONFIG_SPL_UBI_MAX_VOL_LEBS	256
118 #define CONFIG_SPL_UBI_MAX_PEB_SIZE	(256*1024)
119 #define CONFIG_SPL_UBI_MAX_PEBS		4096
120 #define CONFIG_SPL_UBI_VOL_IDS		8
121 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID	0
122 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID	3
123 #define CONFIG_SPL_UBI_LOAD_ARGS_ID	4
124 #define CONFIG_SPL_UBI_PEB_OFFSET	4
125 #define CONFIG_SPL_UBI_VID_OFFSET	512
126 #define CONFIG_SPL_UBI_LEB_START	2048
127 #define CONFIG_SPL_UBI_INFO_ADDR	0x88080000
128 
129 /* environment organization */
130 #define CONFIG_ENV_UBI_PART		"UBI"
131 #define CONFIG_ENV_UBI_VOLUME		"config"
132 #define CONFIG_ENV_UBI_VOLUME_REDUND	"config_r"
133 #define CONFIG_ENV_SIZE			(32*1024)
134 
135 #endif /* __IGEP00X0_H */
136