1 /* 2 * Common configuration settings for IGEP technology based boards 3 * 4 * (C) Copyright 2012 5 * ISEE 2007 SL, <www.iseebcn.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __IGEP00X0_H 11 #define __IGEP00X0_H 12 13 #define CONFIG_NR_DRAM_BANKS 2 14 #define CONFIG_NAND 15 16 #include <configs/ti_omap3_common.h> 17 #include <asm/mach-types.h> 18 19 /* 20 * We are only ever GP parts and will utilize all of the "downloaded image" 21 * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). 22 */ 23 #undef CONFIG_SPL_TEXT_BASE 24 #define CONFIG_SPL_TEXT_BASE 0x40200000 25 26 #define CONFIG_MISC_INIT_R 27 28 #define CONFIG_REVISION_TAG 1 29 30 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */ 31 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ 32 (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) 33 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) 34 #define RED_LED_GPIO 27 35 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) 36 #define RED_LED_GPIO 16 37 #endif 38 #endif 39 40 /* GPIO banks */ 41 #define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ 42 #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ 43 #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ 44 45 /* USB */ 46 #define CONFIG_USB_MUSB_UDC 1 47 #define CONFIG_USB_OMAP3 1 48 #define CONFIG_TWL4030_USB 1 49 50 /* USB device configuration */ 51 #define CONFIG_USB_DEVICE 1 52 #define CONFIG_USB_TTY 1 53 54 /* Change these to suit your needs */ 55 #define CONFIG_USBD_VENDORID 0x0451 56 #define CONFIG_USBD_PRODUCTID 0x5678 57 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 58 #define CONFIG_USBD_PRODUCT_NAME "IGEP" 59 60 #define CONFIG_CMD_MTDPARTS 61 #define CONFIG_CMD_ONENAND 62 63 #ifndef CONFIG_SPL_BUILD 64 65 /* Environment */ 66 #define ENV_DEVICE_SETTINGS \ 67 "stdin=serial\0" \ 68 "stdout=serial\0" \ 69 "stderr=serial\0" 70 71 #define MEM_LAYOUT_SETTINGS \ 72 DEFAULT_LINUX_BOOT_ENV \ 73 "scriptaddr=0x87E00000\0" \ 74 "pxefile_addr_r=0x87F00000\0" 75 76 #define BOOT_TARGET_DEVICES(func) \ 77 func(MMC, mmc, 0) 78 79 #include <config_distro_bootcmd.h> 80 81 #define CONFIG_EXTRA_ENV_SETTINGS \ 82 ENV_DEVICE_SETTINGS \ 83 MEM_LAYOUT_SETTINGS \ 84 BOOTENV 85 86 #endif 87 88 /* 89 * SMSC911x Ethernet 90 */ 91 #if defined(CONFIG_CMD_NET) 92 #define CONFIG_SMC911X 93 #define CONFIG_SMC911X_32_BIT 94 #define CONFIG_SMC911X_BASE 0x2C000000 95 #endif /* (CONFIG_CMD_NET) */ 96 97 #define CONFIG_RBTREE 98 #define CONFIG_MTD_PARTITIONS 99 #define CONFIG_SYS_MTDPARTS_RUNTIME 100 101 /* OneNAND config */ 102 #define CONFIG_USE_ONENAND_BOARD_INIT 103 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 104 #define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024) 105 106 /* NAND config */ 107 #define CONFIG_SPL_OMAP3_ID_NAND 108 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 109 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 110 #define CONFIG_SYS_NAND_PAGE_COUNT 64 111 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 112 #define CONFIG_SYS_NAND_OOBSIZE 64 113 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 114 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 115 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 116 10, 11, 12, 13, 14, 15, 16, 17, \ 117 18, 19, 20, 21, 22, 23, 24, 25, \ 118 26, 27, 28, 29, 30, 31, 32, 33, \ 119 34, 35, 36, 37, 38, 39, 40, 41, \ 120 42, 43, 44, 45, 46, 47, 48, 49, \ 121 50, 51, 52, 53, 54, 55, 56, 57, } 122 #define CONFIG_SYS_NAND_ECCSIZE 512 123 #define CONFIG_SYS_NAND_ECCBYTES 14 124 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW 125 #define CONFIG_NAND_OMAP_GPMC 126 #define CONFIG_BCH 127 128 /* UBI configuration */ 129 #define CONFIG_SPL_UBI 1 130 #define CONFIG_SPL_UBI_MAX_VOL_LEBS 256 131 #define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024) 132 #define CONFIG_SPL_UBI_MAX_PEBS 4096 133 #define CONFIG_SPL_UBI_VOL_IDS 8 134 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0 135 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3 136 #define CONFIG_SPL_UBI_LOAD_ARGS_ID 4 137 #define CONFIG_SPL_UBI_PEB_OFFSET 4 138 #define CONFIG_SPL_UBI_VID_OFFSET 512 139 #define CONFIG_SPL_UBI_LEB_START 2048 140 #define CONFIG_SPL_UBI_INFO_ADDR 0x88080000 141 142 /* environment organization */ 143 #define CONFIG_ENV_IS_IN_UBI 1 144 #define CONFIG_ENV_UBI_PART "UBI" 145 #define CONFIG_ENV_UBI_VOLUME "config" 146 #define CONFIG_ENV_UBI_VOLUME_REDUND "config_r" 147 #define CONFIG_UBI_SILENCE_MSG 1 148 #define CONFIG_UBIFS_SILENCE_MSG 1 149 #define CONFIG_ENV_SIZE (32*1024) 150 151 #endif /* __IGEP00X0_H */ 152