1 /*
2  * Common configuration settings for IGEP technology based boards
3  *
4  * (C) Copyright 2012
5  * ISEE 2007 SL, <www.iseebcn.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __IGEP00X0_H
11 #define __IGEP00X0_H
12 
13 #define CONFIG_NR_DRAM_BANKS            2
14 #define CONFIG_NAND
15 
16 #include <configs/ti_omap3_common.h>
17 #include <asm/mach-types.h>
18 
19 /*
20  * We are only ever GP parts and will utilize all of the "downloaded image"
21  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
22  */
23 #undef CONFIG_SPL_TEXT_BASE
24 #define CONFIG_SPL_TEXT_BASE		0x40200000
25 
26 #define CONFIG_MISC_INIT_R
27 
28 #define CONFIG_REVISION_TAG		1
29 
30 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
31 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
32 		       (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
33 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
34 #define RED_LED_GPIO 27
35 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
36 #define RED_LED_GPIO 16
37 #endif
38 #endif
39 
40 /* USB */
41 #define CONFIG_USB_MUSB_UDC		1
42 #define CONFIG_USB_OMAP3		1
43 #define CONFIG_TWL4030_USB		1
44 
45 /* USB device configuration */
46 #define CONFIG_USB_DEVICE		1
47 #define CONFIG_USB_TTY			1
48 
49 /* Change these to suit your needs */
50 #define CONFIG_USBD_VENDORID		0x0451
51 #define CONFIG_USBD_PRODUCTID		0x5678
52 #define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
53 #define CONFIG_USBD_PRODUCT_NAME	"IGEP"
54 
55 #define CONFIG_CMD_MTDPARTS
56 #define CONFIG_CMD_ONENAND
57 
58 #ifndef CONFIG_SPL_BUILD
59 
60 /* Environment */
61 #define ENV_DEVICE_SETTINGS \
62 	"stdin=serial\0" \
63 	"stdout=serial\0" \
64 	"stderr=serial\0"
65 
66 #define MEM_LAYOUT_SETTINGS \
67 	DEFAULT_LINUX_BOOT_ENV \
68 	"scriptaddr=0x87E00000\0" \
69 	"pxefile_addr_r=0x87F00000\0"
70 
71 #define BOOT_TARGET_DEVICES(func) \
72 	func(MMC, mmc, 0)
73 
74 #include <config_distro_bootcmd.h>
75 
76 #define CONFIG_EXTRA_ENV_SETTINGS \
77 	ENV_DEVICE_SETTINGS \
78 	MEM_LAYOUT_SETTINGS \
79 	BOOTENV
80 
81 #endif
82 
83 /*
84  * SMSC911x Ethernet
85  */
86 #if defined(CONFIG_CMD_NET)
87 #define CONFIG_SMC911X
88 #define CONFIG_SMC911X_32_BIT
89 #define CONFIG_SMC911X_BASE		0x2C000000
90 #endif /* (CONFIG_CMD_NET) */
91 
92 #define CONFIG_RBTREE
93 #define CONFIG_MTD_PARTITIONS
94 #define CONFIG_SYS_MTDPARTS_RUNTIME
95 
96 /* OneNAND config */
97 #define CONFIG_USE_ONENAND_BOARD_INIT
98 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
99 #define CONFIG_SYS_ONENAND_BLOCK_SIZE	(128*1024)
100 
101 /* NAND config */
102 #define CONFIG_SPL_OMAP3_ID_NAND
103 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
104 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
105 #define CONFIG_SYS_NAND_PAGE_COUNT	64
106 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
107 #define CONFIG_SYS_NAND_OOBSIZE		64
108 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
109 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
110 #define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, \
111 					 10, 11, 12, 13, 14, 15, 16, 17, \
112 					 18, 19, 20, 21, 22, 23, 24, 25, \
113 					 26, 27, 28, 29, 30, 31, 32, 33, \
114 					 34, 35, 36, 37, 38, 39, 40, 41, \
115 					 42, 43, 44, 45, 46, 47, 48, 49, \
116 					 50, 51, 52, 53, 54, 55, 56, 57, }
117 #define CONFIG_SYS_NAND_ECCSIZE		512
118 #define CONFIG_SYS_NAND_ECCBYTES	14
119 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
120 #define CONFIG_NAND_OMAP_GPMC
121 #define CONFIG_BCH
122 
123 /* UBI configuration */
124 #define CONFIG_SPL_UBI			1
125 #define CONFIG_SPL_UBI_MAX_VOL_LEBS	256
126 #define CONFIG_SPL_UBI_MAX_PEB_SIZE	(256*1024)
127 #define CONFIG_SPL_UBI_MAX_PEBS		4096
128 #define CONFIG_SPL_UBI_VOL_IDS		8
129 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID	0
130 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID	3
131 #define CONFIG_SPL_UBI_LOAD_ARGS_ID	4
132 #define CONFIG_SPL_UBI_PEB_OFFSET	4
133 #define CONFIG_SPL_UBI_VID_OFFSET	512
134 #define CONFIG_SPL_UBI_LEB_START	2048
135 #define CONFIG_SPL_UBI_INFO_ADDR	0x88080000
136 
137 /* environment organization */
138 #define CONFIG_ENV_IS_NOWHERE		1
139 #define CONFIG_ENV_UBI_PART		"UBI"
140 #define CONFIG_ENV_UBI_VOLUME		"config"
141 #define CONFIG_ENV_UBI_VOLUME_REDUND	"config_r"
142 #define CONFIG_UBI_SILENCE_MSG		1
143 #define CONFIG_UBIFS_SILENCE_MSG	1
144 #define CONFIG_ENV_SIZE			(32*1024)
145 
146 #endif /* __IGEP00X0_H */
147