1 /* 2 * Configuration settings for the TI OMAP3 EVM board. 3 * 4 * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * Author : 7 * Manikandan Pillai <mani.pillai@ti.com> 8 * Derived from Beagle Board and 3430 SDP code by 9 * Richard Woodruff <r-woodruff2@ti.com> 10 * Syed Mohammed Khasim <khasim@ti.com> 11 * 12 * Manikandan Pillai <mani.pillai@ti.com> 13 * 14 * SPDX-License-Identifier: GPL-2.0+ 15 */ 16 17 #ifndef __CONFIG_H 18 #define __CONFIG_H 19 20 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 21 22 #include <configs/ti_omap3_common.h> 23 24 /* 25 * We are only ever GP parts and will utilize all of the "downloaded image" 26 * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). 27 */ 28 #undef CONFIG_SPL_TEXT_BASE 29 #define CONFIG_SPL_TEXT_BASE 0x40200000 30 31 #define CONFIG_SPL_FRAMEWORK 32 33 #define CONFIG_MISC_INIT_R 34 #define CONFIG_CMDLINE_TAG 35 #define CONFIG_SETUP_MEMORY_TAGS 36 #define CONFIG_INITRD_TAG 37 #define CONFIG_REVISION_TAG 38 39 /* Override OMAP3 serial console configuration */ 40 #undef CONFIG_CONS_INDEX 41 #define CONFIG_CONS_INDEX 1 42 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 43 #if defined(CONFIG_SPL_BUILD) 44 #undef CONFIG_SYS_NS16550_REG_SIZE 45 #else /* !CONFIG_SPL_BUILD */ 46 #define CONFIG_SYS_NS16550_REG_SIZE (-1) 47 #endif /* CONFIG_SPL_BUILD */ 48 49 /* NAND */ 50 #if defined(CONFIG_NAND) 51 #define CONFIG_SYS_FLASH_BASE NAND_BASE 52 #define CONFIG_SYS_MAX_NAND_DEVICE 1 53 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 54 #define CONFIG_SYS_NAND_PAGE_COUNT 64 55 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 56 #define CONFIG_SYS_NAND_OOBSIZE 64 57 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 58 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 59 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 60 10, 11, 12, 13} 61 #define CONFIG_SYS_NAND_ECCSIZE 512 62 #define CONFIG_SYS_NAND_ECCBYTES 3 63 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW 64 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 65 #define CONFIG_ENV_IS_IN_NAND 1 66 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 67 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 68 #define CONFIG_ENV_OFFSET 0x260000 69 #define CONFIG_ENV_ADDR 0x260000 70 #define CONFIG_ENV_OVERWRITE 71 #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ 72 /* NAND: SPL falcon mode configs */ 73 #if defined(CONFIG_SPL_OS_BOOT) 74 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 75 #endif /* CONFIG_SPL_OS_BOOT */ 76 #endif /* CONFIG_NAND */ 77 78 /* MUSB */ 79 #define CONFIG_USB_OMAP3 80 #define CONFIG_USB_MUSB_OMAP2PLUS 81 #define CONFIG_USB_MUSB_PIO_ONLY 82 83 /* USB EHCI */ 84 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 85 86 /* Environment */ 87 #define CONFIG_PREBOOT "usb start" 88 89 #if !defined(CONFIG_SPL_BUILD) 90 91 #include <config_distro_defaults.h> 92 93 #define MEM_LAYOUT_ENV_SETTINGS \ 94 DEFAULT_LINUX_BOOT_ENV 95 96 #if defined(CONFIG_NAND) 97 #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ 98 "bootcmd_" #devtypel #instance "=" \ 99 "run nandboot\0" 100 101 #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ 102 #devtypel #instance " " 103 #endif /* CONFIG_NAND */ 104 105 #define BOOTENV_DEV_UIMAGE_MMC(devtypeu, devtypel, instance) \ 106 "bootcmd_" #devtypel #instance "=" \ 107 "setenv mmcdev " #instance"; " \ 108 "run mmcboot\0" 109 110 #define BOOTENV_DEV_NAME_UIMAGE_MMC(devtypeu, devtypel, instance) \ 111 #devtypel #instance " " 112 113 #define BOOTENV_DEV_ZIMAGE_MMC(devtypeu, devtypel, instance) \ 114 "bootcmd_" #devtypel #instance "=" \ 115 "setenv mmcdev " #instance"; " \ 116 "run mmcbootz\0" 117 118 #define BOOTENV_DEV_NAME_ZIMAGE_MMC(devtypeu, devtypel, instance) \ 119 #devtypel #instance " " 120 121 #define BOOT_TARGET_DEVICES(func) \ 122 func(MMC, mmc, 0) \ 123 func(ZIMAGE_MMC, zimage_mmc, 0) \ 124 func(UIMAGE_MMC, uimage_mmc, 0) \ 125 func(NAND, nand, 0) 126 127 #include <config_distro_bootcmd.h> 128 129 #define CONFIG_EXTRA_ENV_SETTINGS \ 130 MEM_LAYOUT_ENV_SETTINGS \ 131 "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ 132 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ 133 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 134 "bootenv=uEnv.txt\0" \ 135 "optargs=\0" \ 136 "mmcdev=0\0" \ 137 "console=ttyO0,115200n8\0" \ 138 "mmcargs=setenv bootargs console=${console} " \ 139 "${mtdparts} " \ 140 "${optargs} " \ 141 "root=/dev/mmcblk0p2 rw " \ 142 "rootfstype=ext4 rootwait\0" \ 143 "nandargs=setenv bootargs console=${console} " \ 144 "${mtdparts} " \ 145 "${optargs} " \ 146 "root=ubi0:rootfs rw ubi.mtd=rootfs noinitrd " \ 147 "rootfstype=ubifs rootwait\0" \ 148 "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ 149 "importbootenv=echo Importing environment from mmc ...; " \ 150 "env import -t ${loadaddr} ${filesize}\0" \ 151 "mmcbootenv=" \ 152 "mmc dev ${mmcdev}; " \ 153 "if mmc rescan && run loadbootenv; then " \ 154 "run importbootenv; " \ 155 "if test -n $uenvcmd; then " \ 156 "echo Running uenvcmd ...; " \ 157 "run uenvcmd; " \ 158 "fi; " \ 159 "fi\0" \ 160 "loaduimage=setenv bootfile uImage; " \ 161 "fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 162 "loadzimage=setenv bootfile zImage; " \ 163 "fatload mmc ${mmcdev} ${loadaddr} zImage\0" \ 164 "loaddtb=fatload mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ 165 "mmcboot=run mmcbootenv; " \ 166 "if run loaduimage && run loaddtb; then " \ 167 "echo Booting ${bootfile} from mmc ...; " \ 168 "run mmcargs; " \ 169 "bootm ${loadaddr} - ${fdtaddr}; " \ 170 "fi\0" \ 171 "mmcbootz=run mmcbootenv; " \ 172 "if run loadzimage && run loaddtb; then " \ 173 "echo Booting ${bootfile} from mmc ...; " \ 174 "run mmcargs; " \ 175 "bootz ${loadaddr} - ${fdtaddr};" \ 176 "fi\0" \ 177 "nandboot=echo Booting uImage from nand ...; " \ 178 "run nandargs; " \ 179 "nand read ${loadaddr} kernel; " \ 180 "nand read ${fdtaddr} dtb; " \ 181 "bootm ${loadaddr} - ${fdtaddr}\0" \ 182 BOOTENV 183 184 #endif /* !CONFIG_SPL_BUILD */ 185 186 #endif /* __CONFIG_H */ 187