1 /* 2 * Configuration settings for the TI OMAP3 EVM board. 3 * 4 * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * Author : 7 * Manikandan Pillai <mani.pillai@ti.com> 8 * Derived from Beagle Board and 3430 SDP code by 9 * Richard Woodruff <r-woodruff2@ti.com> 10 * Syed Mohammed Khasim <khasim@ti.com> 11 * 12 * Manikandan Pillai <mani.pillai@ti.com> 13 * 14 * SPDX-License-Identifier: GPL-2.0+ 15 */ 16 17 #ifndef __OMAP3EVM_CONFIG_H 18 #define __OMAP3EVM_CONFIG_H 19 20 #include <asm/arch/cpu.h> 21 #include <asm/arch/omap.h> 22 23 /* ---------------------------------------------------------------------------- 24 * Supported U-Boot commands 25 * ---------------------------------------------------------------------------- 26 */ 27 28 #define CONFIG_CMD_NAND 29 30 /* ---------------------------------------------------------------------------- 31 * Supported U-Boot features 32 * ---------------------------------------------------------------------------- 33 */ 34 #define CONFIG_SYS_LONGHELP 35 36 /* Allow to overwrite serial and ethaddr */ 37 #define CONFIG_ENV_OVERWRITE 38 39 /* Add auto-completion support */ 40 #define CONFIG_AUTO_COMPLETE 41 42 /* ---------------------------------------------------------------------------- 43 * Supported hardware 44 * ---------------------------------------------------------------------------- 45 */ 46 47 /* SPL */ 48 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 49 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 50 51 /* Partition tables */ 52 53 /* USB 54 * 55 * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard 56 * Enable CONFIG_USB_MUSB_UDD for Device functionalities. 57 */ 58 #define CONFIG_USB_OMAP3 59 #define CONFIG_USB_MUSB_HCD 60 /* #define CONFIG_USB_MUSB_UDC */ 61 62 /* NAND SPL */ 63 #define CONFIG_SPL_NAND_SIMPLE 64 #define CONFIG_SPL_NAND_BASE 65 #define CONFIG_SPL_NAND_DRIVERS 66 #define CONFIG_SPL_NAND_ECC 67 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 68 #define CONFIG_SYS_NAND_PAGE_COUNT 64 69 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 70 #define CONFIG_SYS_NAND_OOBSIZE 64 71 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 72 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 73 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 74 10, 11, 12, 13} 75 #define CONFIG_SYS_NAND_ECCSIZE 512 76 #define CONFIG_SYS_NAND_ECCBYTES 3 77 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 78 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 79 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 80 81 /* 82 * High level configuration options 83 */ 84 85 #define CONFIG_SDRC /* The chip has SDRC controller */ 86 87 /* 88 * Clock related definitions 89 */ 90 #define V_OSCK 26000000 /* Clock output from T2 */ 91 #define V_SCLK (V_OSCK >> 1) 92 93 /* 94 * OMAP3 has 12 GP timers, they can be driven by the system clock 95 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 96 * This rate is divided by a local divisor. 97 */ 98 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 99 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 100 101 /* Size of environment - 128KB */ 102 #define CONFIG_ENV_SIZE (128 << 10) 103 104 /* Size of malloc pool */ 105 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 106 107 /* 108 * Physical Memory Map 109 * Note 1: CS1 may or may not be populated 110 * Note 2: SDRAM size is expected to be at least 32MB 111 */ 112 #define CONFIG_NR_DRAM_BANKS 2 113 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 114 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 115 116 /* Limits for memtest */ 117 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 118 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 119 0x01F00000) /* 31MB */ 120 121 /* Default load address */ 122 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) 123 124 /* ----------------------------------------------------------------------------- 125 * Hardware drivers 126 * ----------------------------------------------------------------------------- 127 */ 128 129 /* 130 * NS16550 Configuration 131 */ 132 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 133 134 #define CONFIG_SYS_NS16550_SERIAL 135 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 136 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 137 138 /* 139 * select serial console configuration 140 */ 141 #define CONFIG_CONS_INDEX 1 142 #define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ 143 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 144 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 145 115200} 146 147 /* 148 * I2C 149 */ 150 #define CONFIG_SYS_I2C 151 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 152 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 153 #define CONFIG_SYS_I2C_OMAP34XX 154 155 /* 156 * PISMO support 157 */ 158 /* Monitor at start of flash - Reserve 2 sectors */ 159 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 160 161 #define CONFIG_SYS_MONITOR_LEN (256 << 10) 162 163 /* Start location & size of environment */ 164 #define ONENAND_ENV_OFFSET 0x260000 165 #define SMNAND_ENV_OFFSET 0x260000 166 167 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 168 169 /* 170 * NAND 171 */ 172 /* Physical address to access NAND */ 173 #define CONFIG_SYS_NAND_ADDR NAND_BASE 174 175 /* Physical address to access NAND at CS0 */ 176 #define CONFIG_SYS_NAND_BASE NAND_BASE 177 178 /* Max number of NAND devices */ 179 #define CONFIG_SYS_MAX_NAND_DEVICE 1 180 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 181 /* Timeout values (in ticks) */ 182 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 183 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 184 185 /* Flash banks JFFS2 should use */ 186 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 187 CONFIG_SYS_MAX_NAND_DEVICE) 188 189 #define CONFIG_SYS_JFFS2_MEM_NAND 190 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 191 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 192 193 #define CONFIG_JFFS2_NAND 194 /* nand device jffs2 lives on */ 195 #define CONFIG_JFFS2_DEV "nand0" 196 /* Start of jffs2 partition */ 197 #define CONFIG_JFFS2_PART_OFFSET 0x680000 198 /* Size of jffs2 partition */ 199 #define CONFIG_JFFS2_PART_SIZE 0xf980000 200 201 /* 202 * USB 203 */ 204 #ifdef CONFIG_USB_OMAP3 205 206 #ifdef CONFIG_USB_MUSB_HCD 207 208 #ifdef CONFIG_USB_KEYBOARD 209 #define CONFIG_SYS_USB_EVENT_POLL 210 #define CONFIG_PREBOOT "usb start" 211 #endif /* CONFIG_USB_KEYBOARD */ 212 213 #endif /* CONFIG_USB_MUSB_HCD */ 214 215 #ifdef CONFIG_USB_MUSB_UDC 216 /* USB device configuration */ 217 #define CONFIG_USB_DEVICE 218 #define CONFIG_USB_TTY 219 220 /* Change these to suit your needs */ 221 #define CONFIG_USBD_VENDORID 0x0451 222 #define CONFIG_USBD_PRODUCTID 0x5678 223 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 224 #define CONFIG_USBD_PRODUCT_NAME "EVM" 225 #endif /* CONFIG_USB_MUSB_UDC */ 226 227 #endif /* CONFIG_USB_OMAP3 */ 228 229 /* ---------------------------------------------------------------------------- 230 * U-Boot features 231 * ---------------------------------------------------------------------------- 232 */ 233 #define CONFIG_SYS_MAXARGS 16 /* max args for a command */ 234 235 #define CONFIG_MISC_INIT_R 236 237 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 238 #define CONFIG_SETUP_MEMORY_TAGS 239 #define CONFIG_INITRD_TAG 240 #define CONFIG_REVISION_TAG 241 242 /* Size of Console IO buffer */ 243 #define CONFIG_SYS_CBSIZE 512 244 245 /* Size of print buffer */ 246 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 247 sizeof(CONFIG_SYS_PROMPT) + 16) 248 249 /* Size of bootarg buffer */ 250 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 251 252 #define CONFIG_BOOTFILE "uImage" 253 254 /* 255 * NAND / OneNAND 256 */ 257 #if defined(CONFIG_CMD_NAND) 258 #define CONFIG_SYS_FLASH_BASE NAND_BASE 259 260 #define CONFIG_NAND_OMAP_GPMC 261 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 262 #elif defined(CONFIG_CMD_ONENAND) 263 #define CONFIG_SYS_FLASH_BASE ONENAND_MAP 264 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 265 #endif 266 267 #if !defined(CONFIG_ENV_IS_NOWHERE) 268 #if defined(CONFIG_CMD_NAND) 269 #define CONFIG_ENV_IS_IN_NAND 270 #elif defined(CONFIG_CMD_ONENAND) 271 #define CONFIG_ENV_IS_IN_ONENAND 272 #define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET 273 #endif 274 #endif /* CONFIG_ENV_IS_NOWHERE */ 275 276 #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET 277 278 #if defined(CONFIG_CMD_NET) 279 280 /* Ethernet (SMSC9115 from SMSC9118 family) */ 281 #define CONFIG_SMC911X 282 #define CONFIG_SMC911X_32_BIT 283 #define CONFIG_SMC911X_BASE 0x2C000000 284 285 /* BOOTP fields */ 286 #define CONFIG_BOOTP_SUBNETMASK 0x00000001 287 #define CONFIG_BOOTP_GATEWAY 0x00000002 288 #define CONFIG_BOOTP_HOSTNAME 0x00000004 289 #define CONFIG_BOOTP_BOOTPATH 0x00000010 290 291 #endif /* CONFIG_CMD_NET */ 292 293 /* Support for relocation */ 294 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 295 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 296 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 297 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 298 CONFIG_SYS_INIT_RAM_SIZE - \ 299 GENERATED_GBL_DATA_SIZE) 300 301 /* ----------------------------------------------------------------------------- 302 * Board specific 303 * ----------------------------------------------------------------------------- 304 */ 305 306 /* Uncomment to define the board revision statically */ 307 /* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ 308 309 /* Defines for SPL */ 310 #define CONFIG_SPL_FRAMEWORK 311 #define CONFIG_SPL_TEXT_BASE 0x40200800 312 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 313 CONFIG_SPL_TEXT_BASE) 314 315 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 316 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 317 318 #define CONFIG_SPL_OMAP3_ID_NAND 319 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 320 321 /* 322 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 323 * 64 bytes before this address should be set aside for u-boot.img's 324 * header. That is 0x800FFFC0--0x80100000 should not be used for any 325 * other needs. 326 */ 327 #define CONFIG_SYS_TEXT_BASE 0x80100000 328 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 329 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 330 331 /* ----------------------------------------------------------------------------- 332 * Default environment 333 * ----------------------------------------------------------------------------- 334 */ 335 336 #define CONFIG_EXTRA_ENV_SETTINGS \ 337 "loadaddr=0x82000000\0" \ 338 "usbtty=cdc_acm\0" \ 339 "mmcdev=0\0" \ 340 "console=ttyO0,115200n8\0" \ 341 "mmcargs=setenv bootargs console=${console} " \ 342 "root=/dev/mmcblk0p2 rw " \ 343 "rootfstype=ext3 rootwait\0" \ 344 "nandargs=setenv bootargs console=${console} " \ 345 "root=/dev/mtdblock4 rw " \ 346 "rootfstype=jffs2\0" \ 347 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 348 "bootscript=echo Running bootscript from mmc ...; " \ 349 "source ${loadaddr}\0" \ 350 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 351 "mmcboot=echo Booting from mmc ...; " \ 352 "run mmcargs; " \ 353 "bootm ${loadaddr}\0" \ 354 "nandboot=echo Booting from nand ...; " \ 355 "run nandargs; " \ 356 "onenand read ${loadaddr} 280000 400000; " \ 357 "bootm ${loadaddr}\0" \ 358 359 #define CONFIG_BOOTCOMMAND \ 360 "mmc dev ${mmcdev}; if mmc rescan; then " \ 361 "if run loadbootscript; then " \ 362 "run bootscript; " \ 363 "else " \ 364 "if run loaduimage; then " \ 365 "run mmcboot; " \ 366 "else run nandboot; " \ 367 "fi; " \ 368 "fi; " \ 369 "else run nandboot; fi" 370 371 #endif /* __OMAP3EVM_CONFIG_H */ 372