1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Author : 5 * Manikandan Pillai <mani.pillai@ti.com> 6 * Derived from Beagle Board and 3430 SDP code by 7 * Richard Woodruff <r-woodruff2@ti.com> 8 * Syed Mohammed Khasim <khasim@ti.com> 9 * 10 * Manikandan Pillai <mani.pillai@ti.com> 11 * 12 * Configuration settings for the TI OMAP3 EVM board. 13 * 14 * See file CREDITS for list of people who contributed to this 15 * project. 16 * 17 * This program is free software; you can redistribute it and/or 18 * modify it under the terms of the GNU General Public License as 19 * published by the Free Software Foundation; either version 2 of 20 * the License, or (at your option) any later version. 21 * 22 * This program is distributed in the hope that it will be useful, 23 * but WITHOUT ANY WARRANTY; without even the implied warranty of 24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 25 * GNU General Public License for more details. 26 * 27 * You should have received a copy of the GNU General Public License 28 * along with this program; if not, write to the Free Software 29 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 30 * MA 02111-1307 USA 31 */ 32 33 #ifndef __CONFIG_H 34 #define __CONFIG_H 35 36 /* 37 * High Level Configuration Options 38 */ 39 #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ 40 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 41 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 42 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 43 #define CONFIG_OMAP3_EVM 1 /* working with EVM */ 44 45 #define CONFIG_SDRC /* The chip has SDRC controller */ 46 47 #include <asm/arch/cpu.h> /* get chip and board defs */ 48 #include <asm/arch/omap3.h> 49 50 /* 51 * Display CPU and Board information 52 */ 53 #define CONFIG_DISPLAY_CPUINFO 1 54 #define CONFIG_DISPLAY_BOARDINFO 1 55 56 /* Clock Defines */ 57 #define V_OSCK 26000000 /* Clock output from T2 */ 58 #define V_SCLK (V_OSCK >> 1) 59 60 #undef CONFIG_USE_IRQ /* no support for IRQs */ 61 #define CONFIG_MISC_INIT_R 62 63 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 64 #define CONFIG_SETUP_MEMORY_TAGS 1 65 #define CONFIG_INITRD_TAG 1 66 #define CONFIG_REVISION_TAG 1 67 68 /* 69 * Size of malloc() pool 70 */ 71 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 72 /* Sector */ 73 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 74 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ 75 /* initial data */ 76 /* 77 * Hardware drivers 78 */ 79 80 /* 81 * NS16550 Configuration 82 */ 83 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 84 85 #define CONFIG_SYS_NS16550 86 #define CONFIG_SYS_NS16550_SERIAL 87 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 88 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 89 90 /* 91 * select serial console configuration 92 */ 93 #define CONFIG_CONS_INDEX 1 94 #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 95 #define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ 96 97 /* allow to overwrite serial and ethaddr */ 98 #define CONFIG_ENV_OVERWRITE 99 #define CONFIG_BAUDRATE 115200 100 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 101 115200} 102 #define CONFIG_MMC 1 103 #define CONFIG_OMAP3_MMC 1 104 #define CONFIG_DOS_PARTITION 1 105 106 /* DDR - I use Micron DDR */ 107 #define CONFIG_OMAP3_MICRON_DDR 1 108 109 /* USB 110 * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard 111 * Enable CONFIG_MUSB_UDD for Device functionalities. 112 */ 113 #define CONFIG_USB_OMAP3 1 114 #define CONFIG_MUSB_HCD 1 115 /* #define CONFIG_MUSB_UDC 1 */ 116 117 #ifdef CONFIG_USB_OMAP3 118 119 #ifdef CONFIG_MUSB_HCD 120 #define CONFIG_CMD_USB 121 122 #define CONFIG_USB_STORAGE 123 #define CONGIG_CMD_STORAGE 124 #define CONFIG_CMD_FAT 125 126 #ifdef CONFIG_USB_KEYBOARD 127 #define CONFIG_SYS_USB_EVENT_POLL 128 #define CONFIG_PREBOOT "usb start" 129 #endif /* CONFIG_USB_KEYBOARD */ 130 131 #endif /* CONFIG_MUSB_HCD */ 132 133 #ifdef CONFIG_MUSB_UDC 134 /* USB device configuration */ 135 #define CONFIG_USB_DEVICE 1 136 #define CONFIG_USB_TTY 1 137 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 138 /* Change these to suit your needs */ 139 #define CONFIG_USBD_VENDORID 0x0451 140 #define CONFIG_USBD_PRODUCTID 0x5678 141 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 142 #define CONFIG_USBD_PRODUCT_NAME "EVM" 143 #endif /* CONFIG_MUSB_UDC */ 144 145 #endif /* CONFIG_USB_OMAP3 */ 146 147 /* commands to include */ 148 #include <config_cmd_default.h> 149 150 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 151 #define CONFIG_CMD_FAT /* FAT support */ 152 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 153 154 #define CONFIG_CMD_I2C /* I2C serial bus support */ 155 #define CONFIG_CMD_MMC /* MMC support */ 156 #define CONFIG_CMD_NAND /* NAND support */ 157 #define CONFIG_CMD_DHCP 158 #define CONFIG_CMD_PING 159 160 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 161 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 162 #undef CONFIG_CMD_IMI /* iminfo */ 163 #undef CONFIG_CMD_IMLS /* List all found images */ 164 165 #define CONFIG_SYS_NO_FLASH 166 #define CONFIG_HARD_I2C 1 167 #define CONFIG_SYS_I2C_SPEED 100000 168 #define CONFIG_SYS_I2C_SLAVE 1 169 #define CONFIG_SYS_I2C_BUS 0 170 #define CONFIG_SYS_I2C_BUS_SELECT 1 171 #define CONFIG_DRIVER_OMAP34XX_I2C 1 172 173 /* 174 * TWL4030 175 */ 176 #define CONFIG_TWL4030_POWER 1 177 178 /* 179 * Board NAND Info. 180 */ 181 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 182 /* to access nand */ 183 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 184 /* to access */ 185 /* nand at CS0 */ 186 187 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 188 /* NAND devices */ 189 #define CONFIG_JFFS2_NAND 190 /* nand device jffs2 lives on */ 191 #define CONFIG_JFFS2_DEV "nand0" 192 /* start of jffs2 partition */ 193 #define CONFIG_JFFS2_PART_OFFSET 0x680000 194 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 195 196 /* Environment information */ 197 #define CONFIG_BOOTDELAY 10 198 199 #define CONFIG_BOOTFILE uImage 200 201 #define CONFIG_EXTRA_ENV_SETTINGS \ 202 "loadaddr=0x82000000\0" \ 203 "usbtty=cdc_acm\0" \ 204 "console=ttyS2,115200n8\0" \ 205 "mmcargs=setenv bootargs console=${console} " \ 206 "root=/dev/mmcblk0p2 rw " \ 207 "rootfstype=ext3 rootwait\0" \ 208 "nandargs=setenv bootargs console=${console} " \ 209 "root=/dev/mtdblock4 rw " \ 210 "rootfstype=jffs2\0" \ 211 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 212 "bootscript=echo Running bootscript from mmc ...; " \ 213 "source ${loadaddr}\0" \ 214 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 215 "mmcboot=echo Booting from mmc ...; " \ 216 "run mmcargs; " \ 217 "bootm ${loadaddr}\0" \ 218 "nandboot=echo Booting from nand ...; " \ 219 "run nandargs; " \ 220 "onenand read ${loadaddr} 280000 400000; " \ 221 "bootm ${loadaddr}\0" \ 222 223 #define CONFIG_BOOTCOMMAND \ 224 "if mmc init; then " \ 225 "if run loadbootscript; then " \ 226 "run bootscript; " \ 227 "else " \ 228 "if run loaduimage; then " \ 229 "run mmcboot; " \ 230 "else run nandboot; " \ 231 "fi; " \ 232 "fi; " \ 233 "else run nandboot; fi" 234 235 #define CONFIG_AUTO_COMPLETE 1 236 /* 237 * Miscellaneous configurable options 238 */ 239 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 240 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 241 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 242 #define CONFIG_SYS_PROMPT "OMAP3_EVM # " 243 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 244 /* Print Buffer Size */ 245 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 246 sizeof(CONFIG_SYS_PROMPT) + 16) 247 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 248 /* args */ 249 /* Boot Argument Buffer Size */ 250 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 251 /* memtest works on */ 252 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 253 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 254 0x01F00000) /* 31MB */ 255 256 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 257 /* address */ 258 259 /* 260 * OMAP3 has 12 GP timers, they can be driven by the system clock 261 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 262 * This rate is divided by a local divisor. 263 */ 264 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 265 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 266 #define CONFIG_SYS_HZ 1000 267 268 /*----------------------------------------------------------------------- 269 * Stack sizes 270 * 271 * The stack sizes are set up in start.S using the settings below 272 */ 273 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 274 #ifdef CONFIG_USE_IRQ 275 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 276 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 277 #endif 278 279 /*----------------------------------------------------------------------- 280 * Physical Memory Map 281 */ 282 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 283 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 284 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 285 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 286 287 /* SDRAM Bank Allocation method */ 288 #define SDRC_R_B_C 1 289 290 /*----------------------------------------------------------------------- 291 * FLASH and environment organization 292 */ 293 294 /* **** PISMO SUPPORT *** */ 295 296 /* Configure the PISMO */ 297 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 298 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 299 300 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 301 /* on one chip */ 302 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 303 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 304 305 #define CONFIG_SYS_FLASH_BASE boot_flash_base 306 307 /* Monitor at start of flash */ 308 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 309 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 310 311 #if defined(CONFIG_CMD_NAND) 312 #define CONFIG_NAND_OMAP_GPMC 313 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 314 #define CONFIG_ENV_IS_IN_NAND 315 #elif defined(CONFIG_CMD_ONENAND) 316 #define CONFIG_ENV_IS_IN_ONENAND 1 317 #endif 318 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 319 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 320 321 #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec 322 #define CONFIG_ENV_OFFSET boot_flash_off 323 #define CONFIG_ENV_ADDR boot_flash_env_addr 324 325 /*----------------------------------------------------------------------- 326 * CFI FLASH driver setup 327 */ 328 /* timeout values are in ticks */ 329 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 330 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 331 332 /* Flash banks JFFS2 should use */ 333 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 334 CONFIG_SYS_MAX_NAND_DEVICE) 335 #define CONFIG_SYS_JFFS2_MEM_NAND 336 /* use flash_info[2] */ 337 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 338 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 339 340 #ifndef __ASSEMBLY__ 341 extern unsigned int boot_flash_base; 342 extern volatile unsigned int boot_flash_env_addr; 343 extern unsigned int boot_flash_off; 344 extern unsigned int boot_flash_sec; 345 extern unsigned int boot_flash_type; 346 #endif 347 348 /*---------------------------------------------------------------------------- 349 * SMSC9115 Ethernet from SMSC9118 family 350 *---------------------------------------------------------------------------- 351 */ 352 #if defined(CONFIG_CMD_NET) 353 354 #define CONFIG_NET_MULTI 355 #define CONFIG_SMC911X 356 #define CONFIG_SMC911X_32_BIT 357 #define CONFIG_SMC911X_BASE 0x2C000000 358 359 #endif /* (CONFIG_CMD_NET) */ 360 361 /* 362 * BOOTP fields 363 */ 364 365 #define CONFIG_BOOTP_SUBNETMASK 0x00000001 366 #define CONFIG_BOOTP_GATEWAY 0x00000002 367 #define CONFIG_BOOTP_HOSTNAME 0x00000004 368 #define CONFIG_BOOTP_BOOTPATH 0x00000010 369 370 #endif /* __CONFIG_H */ 371