1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * Configuration settings for the TI OMAP3530 Beagle board. 8 * 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 /* 32 * High Level Configuration Options 33 */ 34 #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ 35 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 36 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 37 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 38 #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ 39 40 #define CONFIG_SDRC /* The chip has SDRC controller */ 41 42 #include <asm/arch/cpu.h> /* get chip and board defs */ 43 #include <asm/arch/omap3.h> 44 45 /* 46 * Display CPU and Board information 47 */ 48 #define CONFIG_DISPLAY_CPUINFO 1 49 #define CONFIG_DISPLAY_BOARDINFO 1 50 51 /* Clock Defines */ 52 #define V_OSCK 26000000 /* Clock output from T2 */ 53 #define V_SCLK (V_OSCK >> 1) 54 55 #undef CONFIG_USE_IRQ /* no support for IRQs */ 56 #define CONFIG_MISC_INIT_R 57 58 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 59 #define CONFIG_SETUP_MEMORY_TAGS 1 60 #define CONFIG_INITRD_TAG 1 61 #define CONFIG_REVISION_TAG 1 62 63 /* 64 * Size of malloc() pool 65 */ 66 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 67 /* Sector */ 68 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 69 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ 70 /* initial data */ 71 72 /* 73 * Hardware drivers 74 */ 75 76 /* 77 * NS16550 Configuration 78 */ 79 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 80 81 #define CONFIG_SYS_NS16550 82 #define CONFIG_SYS_NS16550_SERIAL 83 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 84 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 85 86 /* 87 * select serial console configuration 88 */ 89 #define CONFIG_CONS_INDEX 3 90 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 91 #define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */ 92 93 /* allow to overwrite serial and ethaddr */ 94 #define CONFIG_ENV_OVERWRITE 95 #define CONFIG_BAUDRATE 115200 96 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 97 115200} 98 #define CONFIG_MMC 1 99 #define CONFIG_OMAP3_MMC 1 100 #define CONFIG_DOS_PARTITION 1 101 102 /* DDR - I use Micron DDR */ 103 #define CONFIG_OMAP3_MICRON_DDR 1 104 105 /* USB */ 106 #define CONFIG_MUSB_UDC 1 107 #define CONFIG_USB_OMAP3 1 108 #define CONFIG_TWL4030_USB 1 109 110 /* USB device configuration */ 111 #define CONFIG_USB_DEVICE 1 112 #define CONFIG_USB_TTY 1 113 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 114 /* Change these to suit your needs */ 115 #define CONFIG_USBD_VENDORID 0x0451 116 #define CONFIG_USBD_PRODUCTID 0x5678 117 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 118 #define CONFIG_USBD_PRODUCT_NAME "Beagle" 119 120 /* commands to include */ 121 #include <config_cmd_default.h> 122 123 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 124 #define CONFIG_CMD_FAT /* FAT support */ 125 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 126 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 127 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 128 #define MTDIDS_DEFAULT "nand0=nand" 129 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 130 "1920k(u-boot),128k(u-boot-env),"\ 131 "4m(kernel),-(fs)" 132 133 #define CONFIG_CMD_I2C /* I2C serial bus support */ 134 #define CONFIG_CMD_MMC /* MMC support */ 135 #define CONFIG_CMD_NAND /* NAND support */ 136 137 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 138 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 139 #undef CONFIG_CMD_IMI /* iminfo */ 140 #undef CONFIG_CMD_IMLS /* List all found images */ 141 #undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 142 #undef CONFIG_CMD_NFS /* NFS support */ 143 144 #define CONFIG_SYS_NO_FLASH 145 #define CONFIG_HARD_I2C 1 146 #define CONFIG_SYS_I2C_SPEED 100000 147 #define CONFIG_SYS_I2C_SLAVE 1 148 #define CONFIG_SYS_I2C_BUS 0 149 #define CONFIG_SYS_I2C_BUS_SELECT 1 150 #define CONFIG_DRIVER_OMAP34XX_I2C 1 151 152 /* 153 * TWL4030 154 */ 155 #define CONFIG_TWL4030_POWER 1 156 #define CONFIG_TWL4030_LED 1 157 158 /* 159 * Board NAND Info. 160 */ 161 #define CONFIG_NAND_OMAP_GPMC 162 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 163 /* to access nand */ 164 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 165 /* to access nand at */ 166 /* CS0 */ 167 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 168 169 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 170 /* devices */ 171 #define CONFIG_JFFS2_NAND 172 /* nand device jffs2 lives on */ 173 #define CONFIG_JFFS2_DEV "nand0" 174 /* start of jffs2 partition */ 175 #define CONFIG_JFFS2_PART_OFFSET 0x680000 176 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 177 /* partition */ 178 179 /* Environment information */ 180 #define CONFIG_BOOTDELAY 10 181 182 #define CONFIG_EXTRA_ENV_SETTINGS \ 183 "loadaddr=0x82000000\0" \ 184 "usbtty=cdc_acm\0" \ 185 "console=ttyS2,115200n8\0" \ 186 "vram=12M\0" \ 187 "dvimode=1024x768MR-16@60\0" \ 188 "defaultdisplay=dvi\0" \ 189 "mmcroot=/dev/mmcblk0p2 rw\0" \ 190 "mmcrootfstype=ext3 rootwait\0" \ 191 "nandroot=/dev/mtdblock4 rw\0" \ 192 "nandrootfstype=jffs2\0" \ 193 "mmcargs=setenv bootargs console=${console} " \ 194 "vram=${vram} " \ 195 "omapfb.mode=dvi:${dvimode} " \ 196 "omapfb.debug=y " \ 197 "omapdss.def_disp=${defaultdisplay} " \ 198 "root=${mmcroot} " \ 199 "rootfstype=${mmcrootfstype}\0" \ 200 "nandargs=setenv bootargs console=${console} " \ 201 "vram=${vram} " \ 202 "omapfb.mode=dvi:${dvimode} " \ 203 "omapfb.debug=y " \ 204 "omapdss.def_disp=${defaultdisplay} " \ 205 "root=${nandroot} " \ 206 "rootfstype=${nandrootfstype}\0" \ 207 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 208 "bootscript=echo Running bootscript from mmc ...; " \ 209 "source ${loadaddr}\0" \ 210 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 211 "mmcboot=echo Booting from mmc ...; " \ 212 "run mmcargs; " \ 213 "bootm ${loadaddr}\0" \ 214 "nandboot=echo Booting from nand ...; " \ 215 "run nandargs; " \ 216 "nand read ${loadaddr} 280000 400000; " \ 217 "bootm ${loadaddr}\0" \ 218 219 #define CONFIG_BOOTCOMMAND \ 220 "if mmc init; then " \ 221 "if run loadbootscript; then " \ 222 "run bootscript; " \ 223 "else " \ 224 "if run loaduimage; then " \ 225 "run mmcboot; " \ 226 "else run nandboot; " \ 227 "fi; " \ 228 "fi; " \ 229 "else run nandboot; fi" 230 231 #define CONFIG_AUTO_COMPLETE 1 232 /* 233 * Miscellaneous configurable options 234 */ 235 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 236 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 237 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 238 #define CONFIG_SYS_PROMPT "OMAP3 beagleboard.org # " 239 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 240 /* Print Buffer Size */ 241 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 242 sizeof(CONFIG_SYS_PROMPT) + 16) 243 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 244 /* Boot Argument Buffer Size */ 245 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 246 247 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ 248 /* works on */ 249 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 250 0x01F00000) /* 31MB */ 251 252 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 253 /* load address */ 254 255 /* 256 * OMAP3 has 12 GP timers, they can be driven by the system clock 257 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 258 * This rate is divided by a local divisor. 259 */ 260 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 261 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 262 #define CONFIG_SYS_HZ 1000 263 264 /*----------------------------------------------------------------------- 265 * Stack sizes 266 * 267 * The stack sizes are set up in start.S using the settings below 268 */ 269 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 270 #ifdef CONFIG_USE_IRQ 271 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 272 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 273 #endif 274 275 /*----------------------------------------------------------------------- 276 * Physical Memory Map 277 */ 278 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 279 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 280 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 281 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 282 283 /* SDRAM Bank Allocation method */ 284 #define SDRC_R_B_C 1 285 286 /*----------------------------------------------------------------------- 287 * FLASH and environment organization 288 */ 289 290 /* **** PISMO SUPPORT *** */ 291 292 /* Configure the PISMO */ 293 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 294 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 295 296 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ 297 /* one chip */ 298 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 299 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 300 301 #define CONFIG_SYS_FLASH_BASE boot_flash_base 302 303 /* Monitor at start of flash */ 304 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 305 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 306 307 #define CONFIG_ENV_IS_IN_NAND 1 308 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 309 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 310 311 #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec 312 #define CONFIG_ENV_OFFSET boot_flash_off 313 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 314 315 /*----------------------------------------------------------------------- 316 * CFI FLASH driver setup 317 */ 318 /* timeout values are in ticks */ 319 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 320 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 321 322 /* Flash banks JFFS2 should use */ 323 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 324 CONFIG_SYS_MAX_NAND_DEVICE) 325 #define CONFIG_SYS_JFFS2_MEM_NAND 326 /* use flash_info[2] */ 327 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 328 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 329 330 #ifndef __ASSEMBLY__ 331 extern unsigned int boot_flash_base; 332 extern volatile unsigned int boot_flash_env_addr; 333 extern unsigned int boot_flash_off; 334 extern unsigned int boot_flash_sec; 335 extern unsigned int boot_flash_type; 336 #endif 337 338 #endif /* __CONFIG_H */ 339