1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * Configuration settings for the TI OMAP3530 Beagle board. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 16 17 /* 18 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 19 * 64 bytes before this address should be set aside for u-boot.img's 20 * header. That is 0x800FFFC0--0x80100000 should not be used for any 21 * other needs. We use this rather than the inherited defines from 22 * ti_armv7_common.h for backwards compatibility. 23 */ 24 #define CONFIG_SYS_TEXT_BASE 0x80100000 25 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 26 #define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */ 27 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 28 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 29 30 #include <configs/ti_omap3_common.h> 31 32 /* 33 * Display CPU and Board information 34 */ 35 #define CONFIG_DISPLAY_CPUINFO 1 36 #define CONFIG_DISPLAY_BOARDINFO 1 37 38 #define CONFIG_MISC_INIT_R 39 40 #define CONFIG_REVISION_TAG 1 41 #define CONFIG_ENV_OVERWRITE 42 43 /* Status LED */ 44 #define CONFIG_STATUS_LED 1 45 #define CONFIG_BOARD_SPECIFIC_LED 1 46 #define STATUS_LED_BIT 0x01 47 #define STATUS_LED_STATE STATUS_LED_ON 48 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) 49 #define STATUS_LED_BIT1 0x02 50 #define STATUS_LED_STATE1 STATUS_LED_ON 51 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) 52 #define STATUS_LED_BOOT STATUS_LED_BIT 53 #define STATUS_LED_GREEN STATUS_LED_BIT1 54 55 /* Enable Multi Bus support for I2C */ 56 #define CONFIG_I2C_MULTI_BUS 1 57 58 /* Probe all devices */ 59 #define CONFIG_SYS_I2C_NOPROBES {{0x0, 0x0}} 60 61 /* USB */ 62 #define CONFIG_MUSB_GADGET 63 #define CONFIG_USB_MUSB_OMAP2PLUS 64 #define CONFIG_MUSB_PIO_ONLY 65 #define CONFIG_USB_GADGET_DUALSPEED 66 #define CONFIG_TWL4030_USB 1 67 #define CONFIG_USB_ETHER 68 #define CONFIG_USB_ETHER_RNDIS 69 #define CONFIG_USB_GADGET 70 #define CONFIG_USB_GADGET_VBUS_DRAW 0 71 #define CONFIG_USB_GADGET_DOWNLOAD 72 #define CONFIG_G_DNL_VENDOR_NUM 0x0451 73 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022 74 #define CONFIG_G_DNL_MANUFACTURER "TI" 75 #define CONFIG_USB_FUNCTION_FASTBOOT 76 #define CONFIG_CMD_FASTBOOT 77 #define CONFIG_ANDROID_BOOT_IMAGE 78 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 79 #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 80 81 /* USB EHCI */ 82 #define CONFIG_CMD_USB 83 #define CONFIG_USB_EHCI 84 85 #define CONFIG_USB_EHCI_OMAP 86 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147 87 88 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 89 #define CONFIG_USB_HOST_ETHER 90 #define CONFIG_USB_ETHER_ASIX 91 #define CONFIG_USB_ETHER_MCS7830 92 #define CONFIG_USB_ETHER_SMSC95XX 93 94 /* GPIO banks */ 95 #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ 96 #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ 97 98 /* commands to include */ 99 #define CONFIG_CMD_ASKENV 100 101 #define CONFIG_CMD_CACHE 102 103 #define MTDIDS_DEFAULT "nand0=nand" 104 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 105 "1920k(u-boot),128k(u-boot-env),"\ 106 "4m(kernel),-(fs)" 107 108 #define CONFIG_USB_STORAGE /* USB storage support */ 109 #define CONFIG_CMD_NAND /* NAND support */ 110 #define CONFIG_CMD_LED /* LED support */ 111 #define CONFIG_CMD_GPIO /* Enable gpio command */ 112 #define CONFIG_CMD_DHCP 113 114 #define CONFIG_VIDEO_OMAP3 /* DSS Support */ 115 116 /* 117 * TWL4030 118 */ 119 #define CONFIG_TWL4030_LED 1 120 121 /* 122 * Board NAND Info. 123 */ 124 #define CONFIG_SYS_NAND_QUIET_TEST 1 125 #define CONFIG_NAND_OMAP_GPMC 126 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 127 /* devices */ 128 129 #define CONFIG_EXTRA_ENV_SETTINGS \ 130 "loadaddr=0x80200000\0" \ 131 "rdaddr=0x81000000\0" \ 132 "fdt_high=0xffffffff\0" \ 133 "fdtaddr=0x80f80000\0" \ 134 "usbtty=cdc_acm\0" \ 135 "bootfile=uImage\0" \ 136 "ramdisk=ramdisk.gz\0" \ 137 "bootdir=/boot\0" \ 138 "bootpart=0:2\0" \ 139 "console=ttyO2,115200n8\0" \ 140 "mpurate=auto\0" \ 141 "buddy=none\0" \ 142 "optargs=\0" \ 143 "camera=none\0" \ 144 "vram=12M\0" \ 145 "dvimode=640x480MR-16@60\0" \ 146 "defaultdisplay=dvi\0" \ 147 "mmcdev=0\0" \ 148 "mmcroot=/dev/mmcblk0p2 rw\0" \ 149 "mmcrootfstype=ext3 rootwait\0" \ 150 "nandroot=ubi0:rootfs ubi.mtd=4\0" \ 151 "nandrootfstype=ubifs\0" \ 152 "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \ 153 "ramrootfstype=ext2\0" \ 154 "mmcargs=setenv bootargs console=${console} " \ 155 "${optargs} " \ 156 "mpurate=${mpurate} " \ 157 "buddy=${buddy} "\ 158 "camera=${camera} "\ 159 "vram=${vram} " \ 160 "omapfb.mode=dvi:${dvimode} " \ 161 "omapdss.def_disp=${defaultdisplay} " \ 162 "root=${mmcroot} " \ 163 "rootfstype=${mmcrootfstype}\0" \ 164 "nandargs=setenv bootargs console=${console} " \ 165 "${optargs} " \ 166 "mpurate=${mpurate} " \ 167 "buddy=${buddy} "\ 168 "camera=${camera} "\ 169 "vram=${vram} " \ 170 "omapfb.mode=dvi:${dvimode} " \ 171 "omapdss.def_disp=${defaultdisplay} " \ 172 "root=${nandroot} " \ 173 "rootfstype=${nandrootfstype}\0" \ 174 "findfdt=" \ 175 "if test $beaglerev = AxBx; then " \ 176 "setenv fdtfile omap3-beagle.dtb; fi; " \ 177 "if test $beaglerev = Cx; then " \ 178 "setenv fdtfile omap3-beagle.dtb; fi; " \ 179 "if test $beaglerev = C4; then " \ 180 "setenv fdtfile omap3-beagle.dtb; fi; " \ 181 "if test $beaglerev = xMAB; then " \ 182 "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \ 183 "if test $beaglerev = xMC; then " \ 184 "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ 185 "if test $fdtfile = undefined; then " \ 186 "echo WARNING: Could not determine device tree to use; fi; \0" \ 187 "validatefdt=" \ 188 "if test $beaglerev = xMAB; then " \ 189 "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \ 190 "setenv fdtfile omap3-beagle-xm.dtb; " \ 191 "fi; " \ 192 "fi; \0" \ 193 "bootenv=uEnv.txt\0" \ 194 "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ 195 "importbootenv=echo Importing environment from mmc ...; " \ 196 "env import -t -r $loadaddr $filesize\0" \ 197 "ramargs=setenv bootargs console=${console} " \ 198 "${optargs} " \ 199 "mpurate=${mpurate} " \ 200 "buddy=${buddy} "\ 201 "vram=${vram} " \ 202 "omapfb.mode=dvi:${dvimode} " \ 203 "omapdss.def_disp=${defaultdisplay} " \ 204 "root=${ramroot} " \ 205 "rootfstype=${ramrootfstype}\0" \ 206 "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ 207 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ 208 "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 209 "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ 210 "source ${loadaddr}\0" \ 211 "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ 212 "mmcboot=echo Booting from mmc ...; " \ 213 "run mmcargs; " \ 214 "bootm ${loadaddr}\0" \ 215 "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \ 216 "run mmcargs; " \ 217 "bootz ${loadaddr} - ${fdtaddr}\0" \ 218 "nandboot=echo Booting from nand ...; " \ 219 "run nandargs; " \ 220 "nand read ${loadaddr} 280000 400000; " \ 221 "bootm ${loadaddr}\0" \ 222 "ramboot=echo Booting from ramdisk ...; " \ 223 "run ramargs; " \ 224 "bootm ${loadaddr}\0" \ 225 "userbutton=if gpio input 173; then run userbutton_xm; " \ 226 "else run userbutton_nonxm; fi;\0" \ 227 "userbutton_xm=gpio input 4;\0" \ 228 "userbutton_nonxm=gpio input 7;\0" 229 /* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */ 230 #define CONFIG_BOOTCOMMAND \ 231 "run findfdt; " \ 232 "mmc dev ${mmcdev}; if mmc rescan; then " \ 233 "if run userbutton; then " \ 234 "setenv bootenv uEnv.txt;" \ 235 "else " \ 236 "setenv bootenv user.txt;" \ 237 "fi;" \ 238 "echo SD/MMC found on device ${mmcdev};" \ 239 "if run loadbootenv; then " \ 240 "echo Loaded environment from ${bootenv};" \ 241 "run importbootenv;" \ 242 "fi;" \ 243 "if test -n $uenvcmd; then " \ 244 "echo Running uenvcmd ...;" \ 245 "run uenvcmd;" \ 246 "fi;" \ 247 "if run loadbootscript; then " \ 248 "run bootscript; " \ 249 "else " \ 250 "if run loadimage; then " \ 251 "run mmcboot;" \ 252 "fi;" \ 253 "fi; " \ 254 "fi;" \ 255 "run nandboot;" \ 256 "setenv bootfile zImage;" \ 257 "if run loadimage; then " \ 258 "run loadfdt;" \ 259 "run mmcbootz; " \ 260 "fi; " \ 261 262 /* 263 * OMAP3 has 12 GP timers, they can be driven by the system clock 264 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 265 * This rate is divided by a local divisor. 266 */ 267 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 268 269 /*----------------------------------------------------------------------- 270 * FLASH and environment organization 271 */ 272 273 /* **** PISMO SUPPORT *** */ 274 #if defined(CONFIG_CMD_NAND) 275 #define CONFIG_SYS_FLASH_BASE NAND_BASE 276 #endif 277 278 /* Monitor at start of flash */ 279 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 280 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 281 282 #define CONFIG_ENV_IS_IN_NAND 1 283 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 284 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 285 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 286 287 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 288 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 289 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 290 291 #define CONFIG_OMAP3_SPI 292 293 #define CONFIG_SYS_CACHELINE_SIZE 64 294 295 /* Defines for SPL */ 296 #define CONFIG_SPL_OMAP3_ID_NAND 297 298 /* NAND boot config */ 299 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 300 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 301 #define CONFIG_SYS_NAND_PAGE_COUNT 64 302 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 303 #define CONFIG_SYS_NAND_OOBSIZE 64 304 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 305 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 306 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 307 10, 11, 12, 13} 308 #define CONFIG_SYS_NAND_ECCSIZE 512 309 #define CONFIG_SYS_NAND_ECCBYTES 3 310 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 311 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 312 /* NAND: SPL falcon mode configs */ 313 #ifdef CONFIG_SPL_OS_BOOT 314 #define CONFIG_CMD_SPL_NAND_OFS 0x240000 315 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 316 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 317 #endif 318 319 #endif /* __CONFIG_H */ 320