1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2013 Samsung Electronics 4 * Hyungwon Hwang <human.hwang@samsung.com> 5 */ 6 7 #ifndef __CONFIG_ODROID_XU3_H 8 #define __CONFIG_ODROID_XU3_H 9 10 #include <configs/exynos5420-common.h> 11 #include <configs/exynos5-common.h> 12 13 #define CONFIG_BOARD_COMMON 14 15 #define CONFIG_SYS_SDRAM_BASE 0x40000000 16 17 /* select serial console configuration */ 18 19 #define TZPC_BASE_OFFSET 0x10000 20 21 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ 22 /* Reserve the last 22 MiB for the secure firmware */ 23 #define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL) 24 #define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE 25 26 #undef CONFIG_ENV_SIZE 27 #undef CONFIG_ENV_OFFSET 28 #define CONFIG_ENV_SIZE (SZ_1K * 16) 29 #define CONFIG_ENV_OFFSET (SZ_1K * 3136) /* ~3 MiB offset */ 30 31 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) 32 33 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" 34 35 /* USB */ 36 #define CONFIG_USB_EHCI_EXYNOS 37 38 /* DFU */ 39 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M 40 #define DFU_DEFAULT_POLL_TIMEOUT 300 41 #define DFU_MANIFEST_POLL_TIMEOUT 25000 42 43 /* THOR */ 44 #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM 45 #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D 46 47 /* UMS */ 48 #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 49 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 50 51 /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ 52 #undef CONFIG_EXYNOS_TMU 53 54 #define CONFIG_DFU_ALT_SYSTEM \ 55 "uImage fat 0 1;" \ 56 "zImage fat 0 1;" \ 57 "Image.itb fat 0 1;" \ 58 "uInitrd fat 0 1;" \ 59 "boot.scr fat 0 1;" \ 60 "boot.cmd fat 0 1;" \ 61 "exynos5422-odroidxu3.dtb fat 0 1;" \ 62 "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ 63 "exynos5422-odroidxu4.dtb fat 0 1;" \ 64 "exynos5422-odroidhc1.dtb fat 0 1;" \ 65 "boot part 0 1;" \ 66 "root part 0 2\0" 67 68 #define CONFIG_DFU_ALT_BOOT_EMMC \ 69 "u-boot raw 0x3e 0x800 mmcpart 1;" \ 70 "bl1 raw 0x0 0x1e mmcpart 1;" \ 71 "bl2 raw 0x1e 0x1d mmcpart 1;" \ 72 "tzsw raw 0x83e 0x200 mmcpart 1;" \ 73 "params.bin raw 0x1880 0x20\0" 74 75 #define CONFIG_DFU_ALT_BOOT_SD \ 76 "u-boot raw 0x3f 0x800;" \ 77 "bl1 raw 0x1 0x1e;" \ 78 "bl2 raw 0x1f 0x1d;" \ 79 "tzsw raw 0x83f 0x200;" \ 80 "params.bin raw 0x1880 0x20\0" 81 82 /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ 83 #define CONFIG_MISC_COMMON 84 #define CONFIG_SET_DFU_ALT_INFO 85 #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) 86 87 /* Set soc_rev, soc_id, board_rev, board_name, fdtfile */ 88 #define CONFIG_ODROID_REV_AIN 9 89 #define CONFIG_REVISION_TAG 90 91 /* 92 * Need to override existing one (smdk5420) with odroid so set_board_info will 93 * use proper prefix when creating full board_name (SYS_BOARD + type) 94 */ 95 #undef CONFIG_SYS_BOARD 96 #define CONFIG_SYS_BOARD "odroid" 97 98 /* Define new extra env settings, including DFU settings */ 99 #undef CONFIG_EXTRA_ENV_SETTINGS 100 #define CONFIG_EXTRA_ENV_SETTINGS \ 101 EXYNOS_DEVICE_SETTINGS \ 102 EXYNOS_FDTFILE_SETTING \ 103 MEM_LAYOUT_ENV_SETTINGS \ 104 BOOTENV \ 105 "rootfstype=ext4\0" \ 106 "console=" CONFIG_DEFAULT_CONSOLE \ 107 "fdtfile=exynos5422-odroidxu3.dtb\0" \ 108 "board_name=odroidxu3\0" \ 109 "mmcbootdev=0\0" \ 110 "mmcrootdev=0\0" \ 111 "mmcbootpart=1\0" \ 112 "mmcrootpart=2\0" \ 113 "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \ 114 "dfu_alt_info=Autoset by THOR/DFU command run.\0" 115 116 #endif /* __CONFIG_H */ 117