1 /* 2 * Copyright (C) 2013 Samsung Electronics 3 * Hyungwon Hwang <human.hwang@samsung.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __CONFIG_ODROID_XU3_H 9 #define __CONFIG_ODROID_XU3_H 10 11 #include "exynos5420-common.h" 12 #include <configs/exynos5-common.h> 13 14 #define CONFIG_BOARD_COMMON 15 16 #define CONFIG_SYS_SDRAM_BASE 0x40000000 17 18 /* select serial console configuration */ 19 #define CONFIG_SERIAL2 /* use SERIAL 2 */ 20 21 #define TZPC_BASE_OFFSET 0x10000 22 23 #define CONFIG_NR_DRAM_BANKS 8 24 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ 25 /* Reserve the last 22 MiB for the secure firmware */ 26 #define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL) 27 #define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE 28 29 #undef CONFIG_ENV_SIZE 30 #undef CONFIG_ENV_OFFSET 31 #define CONFIG_ENV_SIZE (SZ_1K * 16) 32 #define CONFIG_ENV_OFFSET (SZ_1K * 3136) /* ~3 MiB offset */ 33 34 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) 35 36 #define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8" 37 38 /* USB */ 39 #define CONFIG_USB_EHCI_EXYNOS 40 41 /* DFU */ 42 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M 43 #define DFU_DEFAULT_POLL_TIMEOUT 300 44 #define DFU_MANIFEST_POLL_TIMEOUT 25000 45 46 /* THOR */ 47 #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM 48 #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D 49 50 /* UMS */ 51 #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 52 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 53 54 /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ 55 #undef CONFIG_EXYNOS_TMU 56 57 #define CONFIG_DFU_ALT_SYSTEM \ 58 "uImage fat 0 1;" \ 59 "zImage fat 0 1;" \ 60 "Image.itb fat 0 1;" \ 61 "uInitrd fat 0 1;" \ 62 "boot.scr fat 0 1;" \ 63 "boot.cmd fat 0 1;" \ 64 "exynos5422-odroidxu3.dtb fat 0 1;" \ 65 "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ 66 "exynos5422-odroidxu4.dtb fat 0 1;" \ 67 "boot part 0 1;" \ 68 "root part 0 2\0" 69 70 #define CONFIG_DFU_ALT_BOOT_EMMC \ 71 "u-boot raw 0x3e 0x800 mmcpart 1;" \ 72 "bl1 raw 0x0 0x1e mmcpart 1;" \ 73 "bl2 raw 0x1e 0x1d mmcpart 1;" \ 74 "tzsw raw 0x83e 0x200 mmcpart 1;" \ 75 "params.bin raw 0x1880 0x20\0" 76 77 #define CONFIG_DFU_ALT_BOOT_SD \ 78 "u-boot raw 0x3f 0x800;" \ 79 "bl1 raw 0x1 0x1e;" \ 80 "bl2 raw 0x1f 0x1d;" \ 81 "tzsw raw 0x83f 0x200;" \ 82 "params.bin raw 0x1880 0x20\0" 83 84 /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ 85 #define CONFIG_MISC_COMMON 86 #define CONFIG_MISC_INIT_R 87 #define CONFIG_SET_DFU_ALT_INFO 88 #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) 89 90 /* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ 91 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 92 #define CONFIG_ODROID_REV_AIN 9 93 #define CONFIG_REVISION_TAG 94 #define CONFIG_BOARD_TYPES 95 96 #undef CONFIG_SYS_BOARD 97 #define CONFIG_SYS_BOARD "odroid" 98 99 /* Define new extra env settings, including DFU settings */ 100 #undef CONFIG_EXTRA_ENV_SETTINGS 101 #define CONFIG_EXTRA_ENV_SETTINGS \ 102 EXYNOS_DEVICE_SETTINGS \ 103 EXYNOS_FDTFILE_SETTING \ 104 MEM_LAYOUT_ENV_SETTINGS \ 105 BOOTENV \ 106 "bootdelay=0\0" \ 107 "rootfstype=ext4\0" \ 108 "console=" CONFIG_DEFAULT_CONSOLE "\0"\ 109 "fdtfile=exynos5422-odroidxu3.dtb\0" \ 110 "boardname=odroidxu3\0" \ 111 "mmcbootdev=0\0" \ 112 "mmcrootdev=0\0" \ 113 "mmcbootpart=1\0" \ 114 "mmcrootpart=2\0" \ 115 "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \ 116 "dfu_alt_info=Autoset by THOR/DFU command run.\0" 117 118 #endif /* __CONFIG_H */ 119