1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2013 Samsung Electronics 4 * Hyungwon Hwang <human.hwang@samsung.com> 5 */ 6 7 #ifndef __CONFIG_ODROID_XU3_H 8 #define __CONFIG_ODROID_XU3_H 9 10 #include "exynos5420-common.h" 11 #include <configs/exynos5-common.h> 12 13 #define CONFIG_BOARD_COMMON 14 15 #define CONFIG_SYS_SDRAM_BASE 0x40000000 16 17 /* select serial console configuration */ 18 #define CONFIG_SERIAL2 /* use SERIAL 2 */ 19 20 #define TZPC_BASE_OFFSET 0x10000 21 22 #define CONFIG_NR_DRAM_BANKS 8 23 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ 24 /* Reserve the last 22 MiB for the secure firmware */ 25 #define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL) 26 #define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE 27 28 #undef CONFIG_ENV_SIZE 29 #undef CONFIG_ENV_OFFSET 30 #define CONFIG_ENV_SIZE (SZ_1K * 16) 31 #define CONFIG_ENV_OFFSET (SZ_1K * 3136) /* ~3 MiB offset */ 32 33 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) 34 35 #define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8" 36 37 /* USB */ 38 #define CONFIG_USB_EHCI_EXYNOS 39 40 /* DFU */ 41 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M 42 #define DFU_DEFAULT_POLL_TIMEOUT 300 43 #define DFU_MANIFEST_POLL_TIMEOUT 25000 44 45 /* THOR */ 46 #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM 47 #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D 48 49 /* UMS */ 50 #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 51 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 52 53 /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ 54 #undef CONFIG_EXYNOS_TMU 55 56 #define CONFIG_DFU_ALT_SYSTEM \ 57 "uImage fat 0 1;" \ 58 "zImage fat 0 1;" \ 59 "Image.itb fat 0 1;" \ 60 "uInitrd fat 0 1;" \ 61 "boot.scr fat 0 1;" \ 62 "boot.cmd fat 0 1;" \ 63 "exynos5422-odroidxu3.dtb fat 0 1;" \ 64 "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ 65 "exynos5422-odroidxu4.dtb fat 0 1;" \ 66 "boot part 0 1;" \ 67 "root part 0 2\0" 68 69 #define CONFIG_DFU_ALT_BOOT_EMMC \ 70 "u-boot raw 0x3e 0x800 mmcpart 1;" \ 71 "bl1 raw 0x0 0x1e mmcpart 1;" \ 72 "bl2 raw 0x1e 0x1d mmcpart 1;" \ 73 "tzsw raw 0x83e 0x200 mmcpart 1;" \ 74 "params.bin raw 0x1880 0x20\0" 75 76 #define CONFIG_DFU_ALT_BOOT_SD \ 77 "u-boot raw 0x3f 0x800;" \ 78 "bl1 raw 0x1 0x1e;" \ 79 "bl2 raw 0x1f 0x1d;" \ 80 "tzsw raw 0x83f 0x200;" \ 81 "params.bin raw 0x1880 0x20\0" 82 83 /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ 84 #define CONFIG_MISC_COMMON 85 #define CONFIG_MISC_INIT_R 86 #define CONFIG_SET_DFU_ALT_INFO 87 #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) 88 89 /* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ 90 #define CONFIG_ODROID_REV_AIN 9 91 #define CONFIG_REVISION_TAG 92 #define CONFIG_BOARD_TYPES 93 94 #undef CONFIG_SYS_BOARD 95 #define CONFIG_SYS_BOARD "odroid" 96 97 /* Define new extra env settings, including DFU settings */ 98 #undef CONFIG_EXTRA_ENV_SETTINGS 99 #define CONFIG_EXTRA_ENV_SETTINGS \ 100 EXYNOS_DEVICE_SETTINGS \ 101 EXYNOS_FDTFILE_SETTING \ 102 MEM_LAYOUT_ENV_SETTINGS \ 103 BOOTENV \ 104 "rootfstype=ext4\0" \ 105 "console=" CONFIG_DEFAULT_CONSOLE "\0"\ 106 "fdtfile=exynos5422-odroidxu3.dtb\0" \ 107 "boardname=odroidxu3\0" \ 108 "mmcbootdev=0\0" \ 109 "mmcrootdev=0\0" \ 110 "mmcbootpart=1\0" \ 111 "mmcrootpart=2\0" \ 112 "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \ 113 "dfu_alt_info=Autoset by THOR/DFU command run.\0" 114 115 #endif /* __CONFIG_H */ 116