xref: /openbmc/u-boot/include/configs/odroid.h (revision bfc37f3c)
1 /*
2  * Copyright (C) 2014 Samsung Electronics
3  * Sanghee Kim <sh0130.kim@samsung.com>
4  * Piotr Wilczek <p.wilczek@samsung.com>
5  * Przemyslaw Marczak <p.marczak@samsung.com>
6  *
7  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef __CONFIG_ODROID_U3_H
13 #define __CONFIG_ODROID_U3_H
14 
15 #include <configs/exynos4-common.h>
16 
17 #define CONFIG_SYS_L2CACHE_OFF
18 #ifndef CONFIG_SYS_L2CACHE_OFF
19 #define CONFIG_SYS_L2_PL310
20 #define CONFIG_SYS_PL310_BASE	0x10502000
21 #endif
22 
23 #define CONFIG_MACH_TYPE	4289
24 
25 #define CONFIG_NR_DRAM_BANKS	8
26 #define CONFIG_SYS_SDRAM_BASE	0x40000000
27 #define SDRAM_BANK_SIZE		(256 << 20)	/* 256 MB */
28 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
29 /* Reserve the last 1 MiB for the secure firmware */
30 #define CONFIG_SYS_MEM_TOP_HIDE		(1UL << 20UL)
31 #define CONFIG_TZSW_RESERVED_DRAM_SIZE	CONFIG_SYS_MEM_TOP_HIDE
32 
33 /* memtest works on */
34 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
35 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
36 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
37 #define CONFIG_SYS_TEXT_BASE		0x43e00000
38 
39 #include <linux/sizes.h>
40 
41 /* select serial console configuration */
42 #define CONFIG_SERIAL1
43 #define CONFIG_BAUDRATE			115200
44 
45 /* Console configuration */
46 #define CONFIG_SYS_CONSOLE_INFO_QUIET
47 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
48 
49 #define CONFIG_CMD_BOOTZ
50 #define CONFIG_FIT
51 #define CONFIG_FIT_VERBOSE
52 #define CONFIG_BOOTARGS			"Please use defined boot"
53 #define CONFIG_BOOTCOMMAND		"run autoboot"
54 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
55 
56 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
57 					- GENERATED_GBL_DATA_SIZE)
58 
59 #define CONFIG_SYS_MONITOR_BASE	0x00000000
60 
61 #define CONFIG_ENV_IS_IN_MMC
62 #define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
63 #define CONFIG_ENV_SIZE			4096
64 #define CONFIG_ENV_OFFSET		(SZ_1K * 1280) /* 1.25 MiB offset */
65 #define CONFIG_ENV_OVERWRITE
66 
67 /* Partitions name */
68 #define PARTS_BOOT		"boot"
69 #define PARTS_ROOT		"platform"
70 
71 #define CONFIG_DFU_ALT \
72 	"uImage fat 0 1;" \
73 	"zImage fat 0 1;" \
74 	"Image.itb fat 0 1;" \
75 	"uInitrd fat 0 1;" \
76 	"exynos4412-odroidu3.dtb fat 0 1;" \
77 	"exynos4412-odroidx2.dtb fat 0 1;" \
78 	""PARTS_BOOT" part 0 1;" \
79 	""PARTS_ROOT" part 0 2\0" \
80 
81 #define CONFIG_SET_DFU_ALT_INFO
82 #define CONFIG_SET_DFU_ALT_BUF_LEN	(SZ_1K)
83 
84 #define CONFIG_DFU_ALT_BOOT_EMMC \
85 	"u-boot raw 0x3e 0x800 mmcpart 1;" \
86 	"bl1 raw 0x0 0x1e mmcpart 1;" \
87 	"bl2 raw 0x1e 0x1d mmcpart 1;" \
88 	"tzsw raw 0x83e 0x138 mmcpart 1\0"
89 
90 #define CONFIG_DFU_ALT_BOOT_SD \
91 	"u-boot raw 0x3f 0x800;" \
92 	"bl1 raw 0x1 0x1e;" \
93 	"bl2 raw 0x1f 0x1d;" \
94 	"tzsw raw 0x83f 0x138\0"
95 
96 /*
97  * Bootable media layout:
98  * dev:    SD   eMMC(part boot)
99  * BL1      1    0
100  * BL2     31   30
101  * UBOOT   63   62
102  * TZSW  2111 2110
103  * ENV   2560 2560(part user)
104  *
105  * MBR Primary partiions:
106  * Num Name   Size  Offset
107  * 1.  BOOT:  100MiB 2MiB
108  * 2.  ROOT:  -
109 */
110 #define CONFIG_EXTRA_ENV_SETTINGS \
111 	"loadkernel=fatload mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
112 		"${kernelname}\0" \
113 	"loadinitrd=fatload mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
114 		"${initrdname}\0" \
115 	"loaddtb=fatload mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
116 		"${fdtfile}\0" \
117 	"check_ramdisk=" \
118 		"if run loadinitrd; then " \
119 			"setenv initrd_addr ${initrdaddr};" \
120 		"else " \
121 			"setenv initrd_addr -;" \
122 		"fi;\0" \
123 	"check_dtb=" \
124 		"if run loaddtb; then " \
125 			"setenv fdt_addr ${fdtaddr};" \
126 		"else " \
127 			"setenv fdt_addr;" \
128 		"fi;\0" \
129 	"kernel_args=" \
130 		"setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \
131 		" rootwait ${console} ${opts}\0" \
132 	"boot_fit=" \
133 		"setenv kerneladdr 0x42000000;" \
134 		"setenv kernelname Image.itb;" \
135 		"run loadkernel;" \
136 		"run kernel_args;" \
137 		"bootm ${kerneladdr}#${boardname}\0" \
138 	"boot_uimg=" \
139 		"setenv kerneladdr 0x40007FC0;" \
140 		"setenv kernelname uImage;" \
141 		"run check_dtb;" \
142 		"run check_ramdisk;" \
143 		"run loadkernel;" \
144 		"run kernel_args;" \
145 		"bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
146 	"boot_zimg=" \
147 		"setenv kerneladdr 0x40007FC0;" \
148 		"setenv kernelname zImage;" \
149 		"run check_dtb;" \
150 		"run check_ramdisk;" \
151 		"run loadkernel;" \
152 		"run kernel_args;" \
153 		"bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
154 	"autoboot=" \
155 		"if test -e mmc 0 Image.itb; then; " \
156 			"run boot_fit;" \
157 		"elif test -e mmc 0 zImage; then; " \
158 			"run boot_zimg;" \
159 		"elif test -e mmc 0 uImage; then; " \
160 			"run boot_uimg;" \
161 		"fi;\0" \
162 	"console=" CONFIG_DEFAULT_CONSOLE \
163 	"mmcbootdev=0\0" \
164 	"mmcbootpart=1\0" \
165 	"mmcrootdev=0\0" \
166 	"mmcrootpart=2\0" \
167 	"bootdelay=0\0" \
168 	"dfu_alt_system="CONFIG_DFU_ALT \
169 	"dfu_alt_info=Please reset the board\0" \
170 	"consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
171 	"consoleoff=set console console=ram; save; reset\0" \
172 	"initrdname=uInitrd\0" \
173 	"initrdaddr=42000000\0" \
174 	"fdtaddr=40800000\0"
175 
176 /* I2C */
177 #define CONFIG_CMD_I2C
178 #define CONFIG_SYS_I2C_S3C24X0
179 #define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
180 #define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
181 
182 /* GPT */
183 #define CONFIG_RANDOM_UUID
184 
185 /* Security subsystem - enable hw_rand() */
186 #define CONFIG_EXYNOS_ACE_SHA
187 #define CONFIG_LIB_HW_RAND
188 
189 #define CONFIG_CMD_GPIO
190 
191 /* USB */
192 #define CONFIG_CMD_USB
193 #define CONFIG_USB_EHCI
194 #define CONFIG_USB_EHCI_EXYNOS
195 #define CONFIG_USB_STORAGE
196 
197 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
198 #define CONFIG_CMD_PING
199 #define CONFIG_CMD_DHCP
200 #define CONFIG_USB_HOST_ETHER
201 #define CONFIG_USB_ETHER_SMSC95XX
202 
203 /*
204  * Supported Odroid boards: X3, U3
205  * TODO: Add Odroid X support
206  */
207 #define CONFIG_MISC_COMMON
208 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
209 #define CONFIG_BOARD_TYPES
210 #define CONFIG_MISC_INIT_R
211 
212 #undef CONFIG_REVISION_TAG
213 
214 #endif	/* __CONFIG_H */
215