xref: /openbmc/u-boot/include/configs/odroid.h (revision 3d357619)
1 /*
2  * Copyright (C) 2014 Samsung Electronics
3  * Sanghee Kim <sh0130.kim@samsung.com>
4  * Piotr Wilczek <p.wilczek@samsung.com>
5  * Przemyslaw Marczak <p.marczak@samsung.com>
6  *
7  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef __CONFIG_ODROID_U3_H
13 #define __CONFIG_ODROID_U3_H
14 
15 #include <configs/exynos4-common.h>
16 
17 #define CONFIG_SYS_PROMPT	"Odroid # "	/* Monitor Command Prompt */
18 
19 
20 #define CONFIG_SYS_L2CACHE_OFF
21 #ifndef CONFIG_SYS_L2CACHE_OFF
22 #define CONFIG_SYS_L2_PL310
23 #define CONFIG_SYS_PL310_BASE	0x10502000
24 #endif
25 
26 #define CONFIG_MACH_TYPE	4289
27 
28 #define CONFIG_NR_DRAM_BANKS	8
29 #define CONFIG_SYS_SDRAM_BASE	0x40000000
30 #define SDRAM_BANK_SIZE		(256 << 20)	/* 256 MB */
31 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
32 
33 /* memtest works on */
34 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
35 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
36 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
37 #define CONFIG_SYS_TEXT_BASE		0x43e00000
38 
39 #include <linux/sizes.h>
40 
41 /* select serial console configuration */
42 #define CONFIG_SERIAL1
43 #define CONFIG_BAUDRATE			115200
44 
45 /* Console configuration */
46 #define CONFIG_SYS_CONSOLE_INFO_QUIET
47 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
48 
49 #define CONFIG_CMD_BOOTZ
50 #define CONFIG_FIT
51 #define CONFIG_FIT_VERBOSE
52 #define CONFIG_BOOTARGS			"Please use defined boot"
53 #define CONFIG_BOOTCOMMAND		"run autoboot"
54 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
55 
56 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
57 					- GENERATED_GBL_DATA_SIZE)
58 
59 #define CONFIG_SYS_MEM_TOP_HIDE	(SZ_1M)	/* ram console */
60 
61 #define CONFIG_SYS_MONITOR_BASE	0x00000000
62 
63 #define CONFIG_ENV_IS_IN_MMC
64 #define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
65 #define CONFIG_ENV_SIZE			4096
66 #define CONFIG_ENV_OFFSET		(SZ_1K * 1280) /* 1.25 MiB offset */
67 #define CONFIG_ENV_OVERWRITE
68 
69 /* Partitions name */
70 #define PARTS_BOOT		"boot"
71 #define PARTS_ROOT		"platform"
72 
73 #define CONFIG_DFU_ALT \
74 	"uImage fat 0 1;" \
75 	"zImage fat 0 1;" \
76 	"Image.itb fat 0 1;" \
77 	"uInitrd fat 0 1;" \
78 	"exynos4412-odroidu3.dtb fat 0 1;" \
79 	"exynos4412-odroidx2.dtb fat 0 1;" \
80 	""PARTS_BOOT" part 0 1;" \
81 	""PARTS_ROOT" part 0 2\0" \
82 
83 #define CONFIG_SET_DFU_ALT_INFO
84 #define CONFIG_SET_DFU_ALT_BUF_LEN	(SZ_1K)
85 
86 #define CONFIG_DFU_ALT_BOOT_EMMC \
87 	"u-boot raw 0x3e 0x800 mmcpart 1;" \
88 	"bl1 raw 0x0 0x1e mmcpart 1;" \
89 	"bl2 raw 0x1e 0x1d mmcpart 1;" \
90 	"tzsw raw 0x83e 0x138 mmcpart 1\0"
91 
92 #define CONFIG_DFU_ALT_BOOT_SD \
93 	"u-boot raw 0x3f 0x800;" \
94 	"bl1 raw 0x1 0x1e;" \
95 	"bl2 raw 0x1f 0x1d;" \
96 	"tzsw raw 0x83f 0x138\0"
97 
98 /*
99  * Bootable media layout:
100  * dev:    SD   eMMC(part boot)
101  * BL1      1    0
102  * BL2     31   30
103  * UBOOT   63   62
104  * TZSW  2111 2110
105  * ENV   2560 2560(part user)
106  *
107  * MBR Primary partiions:
108  * Num Name   Size  Offset
109  * 1.  BOOT:  100MiB 2MiB
110  * 2.  ROOT:  -
111 */
112 #define CONFIG_EXTRA_ENV_SETTINGS \
113 	"loadkernel=fatload mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
114 		"${kernelname}\0" \
115 	"loadinitrd=fatload mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
116 		"${initrdname}\0" \
117 	"loaddtb=fatload mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
118 		"${fdtfile}\0" \
119 	"check_ramdisk=" \
120 		"if run loadinitrd; then " \
121 			"setenv initrd_addr ${initrdaddr};" \
122 		"else " \
123 			"setenv initrd_addr -;" \
124 		"fi;\0" \
125 	"check_dtb=" \
126 		"if run loaddtb; then " \
127 			"setenv fdt_addr ${fdtaddr};" \
128 		"else " \
129 			"setenv fdt_addr;" \
130 		"fi;\0" \
131 	"kernel_args=" \
132 		"setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \
133 		" rootwait ${console} ${opts}\0" \
134 	"boot_fit=" \
135 		"setenv kerneladdr 0x42000000;" \
136 		"setenv kernelname Image.itb;" \
137 		"run loadkernel;" \
138 		"run kernel_args;" \
139 		"bootm ${kerneladdr}#${boardname}\0" \
140 	"boot_uimg=" \
141 		"setenv kerneladdr 0x40007FC0;" \
142 		"setenv kernelname uImage;" \
143 		"run check_dtb;" \
144 		"run check_ramdisk;" \
145 		"run loadkernel;" \
146 		"run kernel_args;" \
147 		"bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
148 	"boot_zimg=" \
149 		"setenv kerneladdr 0x40007FC0;" \
150 		"setenv kernelname zImage;" \
151 		"run check_dtb;" \
152 		"run check_ramdisk;" \
153 		"run loadkernel;" \
154 		"run kernel_args;" \
155 		"bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
156 	"autoboot=" \
157 		"if test -e mmc 0 Image.itb; then; " \
158 			"run boot_fit;" \
159 		"elif test -e mmc 0 zImage; then; " \
160 			"run boot_zimg;" \
161 		"elif test -e mmc 0 uImage; then; " \
162 			"run boot_uimg;" \
163 		"fi;\0" \
164 	"console=" CONFIG_DEFAULT_CONSOLE \
165 	"mmcbootdev=0\0" \
166 	"mmcbootpart=1\0" \
167 	"mmcrootdev=0\0" \
168 	"mmcrootpart=2\0" \
169 	"bootdelay=0\0" \
170 	"dfu_alt_system="CONFIG_DFU_ALT \
171 	"dfu_alt_info=Please reset the board\0" \
172 	"consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
173 	"consoleoff=set console console=ram; save; reset\0" \
174 	"initrdname=uInitrd\0" \
175 	"initrdaddr=42000000\0" \
176 	"fdtaddr=40800000\0"
177 
178 /* I2C */
179 #define CONFIG_CMD_I2C
180 #define CONFIG_SYS_I2C_S3C24X0
181 #define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
182 #define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
183 
184 /* POWER */
185 #define CONFIG_POWER
186 #define CONFIG_POWER_I2C
187 #define CONFIG_POWER_MAX77686
188 
189 /* GPT */
190 #define CONFIG_RANDOM_UUID
191 
192 /* Security subsystem - enable hw_rand() */
193 #define CONFIG_EXYNOS_ACE_SHA
194 #define CONFIG_LIB_HW_RAND
195 
196 #define CONFIG_CMD_GPIO
197 
198 /* USB */
199 #define CONFIG_CMD_USB
200 #define CONFIG_USB_EHCI
201 #define CONFIG_USB_EHCI_EXYNOS
202 #define CONFIG_USB_STORAGE
203 
204 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
205 #define CONFIG_CMD_NET
206 #define CONFIG_CMD_PING
207 #define CONFIG_CMD_DHCP
208 #define CONFIG_USB_HOST_ETHER
209 #define CONFIG_USB_ETHER_SMSC95XX
210 
211 /*
212  * Supported Odroid boards: X3, U3
213  * TODO: Add Odroid X support
214  */
215 #define CONFIG_MISC_COMMON
216 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
217 #define CONFIG_BOARD_TYPES
218 #define CONFIG_MISC_INIT_R
219 
220 #undef CONFIG_REVISION_TAG
221 
222 #endif	/* __CONFIG_H */
223