1 /* 2 * (C) Copyright 2011-2012 3 * Pali Rohár <pali.rohar@gmail.com> 4 * 5 * (C) Copyright 2010 6 * Alistair Buxton <a.j.buxton@gmail.com> 7 * 8 * Derived from Beagle Board code: 9 * (C) Copyright 2006-2008 10 * Texas Instruments. 11 * Richard Woodruff <r-woodruff2@ti.com> 12 * Syed Mohammed Khasim <x0khasim@ti.com> 13 * 14 * Configuration settings for the Nokia RX-51 aka N900. 15 * 16 * SPDX-License-Identifier: GPL-2.0+ 17 */ 18 19 #ifndef __CONFIG_H 20 #define __CONFIG_H 21 22 /* 23 * High Level Configuration Options 24 */ 25 26 #define CONFIG_OMAP /* in a TI OMAP core */ 27 #define CONFIG_OMAP3430 /* which is in a 3430 */ 28 #define CONFIG_OMAP3_RX51 /* working with RX51 */ 29 #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ 30 #define CONFIG_OMAP_COMMON 31 #define CONFIG_SYS_GENERIC_BOARD 32 /* Common ARM Erratas */ 33 #define CONFIG_ARM_ERRATA_454179 34 #define CONFIG_ARM_ERRATA_430973 35 #define CONFIG_ARM_ERRATA_621766 36 37 #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 38 39 /* 40 * Nokia X-Loader loading secondary image to address 0x80400000 41 * NOLO loading boot image to random place, so it doesn't really 42 * matter what we set this to. We have to copy u-boot to this address 43 */ 44 #define CONFIG_SYS_TEXT_BASE 0x80008000 45 46 #define CONFIG_SDRC /* The chip has SDRC controller */ 47 48 #include <asm/arch/cpu.h> /* get chip and board defs */ 49 #include <asm/arch/omap.h> 50 #include <asm/arch/mem.h> 51 #include <linux/stringify.h> 52 53 /* 54 * Display CPU and Board information 55 */ 56 #define CONFIG_DISPLAY_CPUINFO 57 #define CONFIG_DISPLAY_BOARDINFO 58 59 /* Clock Defines */ 60 #define V_OSCK 26000000 /* Clock output from T2 */ 61 #define V_SCLK (V_OSCK >> 1) 62 63 #undef CONFIG_USE_IRQ /* no support for IRQs */ 64 #define CONFIG_MISC_INIT_R 65 #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ 66 67 #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ 68 #define CONFIG_INITRD_TAG /* enable passing initrd */ 69 #define CONFIG_REVISION_TAG /* enable passing revision tag*/ 70 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 71 72 /* 73 * Size of malloc() pool 74 */ 75 #define CONFIG_ENV_SIZE (128 << 10) 76 #define CONFIG_UBI_SIZE (512 << 10) 77 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ 78 (128 << 10)) 79 80 /* 81 * Hardware drivers 82 */ 83 84 /* 85 * NS16550 Configuration 86 */ 87 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 88 89 #define CONFIG_SYS_NS16550 90 #define CONFIG_SYS_NS16550_SERIAL 91 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 92 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 93 94 /* 95 * select serial console configuration 96 */ 97 #define CONFIG_CONS_INDEX 3 98 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 99 #define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ 100 101 /* allow to overwrite serial and ethaddr */ 102 #define CONFIG_ENV_OVERWRITE 103 #define CONFIG_BAUDRATE 115200 104 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } 105 #define CONFIG_MMC 106 #define CONFIG_GENERIC_MMC 107 #define CONFIG_OMAP_HSMMC 108 #define CONFIG_DOS_PARTITION 109 110 /* USB */ 111 #define CONFIG_MUSB_UDC 112 #define CONFIG_MUSB_HDC 113 #define CONFIG_USB_OMAP3 114 #define CONFIG_TWL4030_USB 115 116 /* USB device configuration */ 117 #define CONFIG_USB_DEVICE 118 #define CONFIG_USBD_VENDORID 0x0421 119 #define CONFIG_USBD_PRODUCTID 0x01c8 120 #define CONFIG_USBD_MANUFACTURER "Nokia" 121 #define CONFIG_USBD_PRODUCT_NAME "N900" 122 123 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 124 #define CONFIG_SYS_NO_FLASH 125 126 /* commands to include */ 127 #include <config_cmd_default.h> 128 129 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 130 #define CONFIG_CMD_EXT4 /* EXT4 Support */ 131 #define CONFIG_CMD_FAT /* FAT support */ 132 133 #define CONFIG_CMD_I2C /* I2C serial bus support */ 134 #define CONFIG_CMD_MMC /* MMC support */ 135 #define CONFIG_CMD_GPIO /* Enable gpio command */ 136 137 #define CONFIG_CMDLINE_EDITING /* add command line history */ 138 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 139 140 #define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */ 141 #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ 142 143 #ifdef ONENAND_SUPPORT 144 145 #define CONFIG_CMD_ONENAND /* ONENAND support */ 146 #define CONFIG_CMD_MTDPARTS /* mtd parts support */ 147 148 #ifdef UBIFS_SUPPORT 149 #define CONFIG_CMD_UBI /* UBI Support */ 150 #define CONFIG_CMD_UBIFS /* UBIFS Support */ 151 #endif 152 153 #endif 154 155 /* commands not needed from config_cmd_default.h */ 156 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 157 #undef CONFIG_CMD_IMI /* iminfo */ 158 #undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 159 #undef CONFIG_CMD_NFS /* NFS support */ 160 #undef CONFIG_CMD_SAVEENV /* saveenv */ 161 #undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ 162 163 #define CONFIG_OMAP3_SPI 164 #define CONFIG_SYS_I2C 165 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 166 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 167 #define CONFIG_SYS_I2C_OMAP34XX 168 169 /* 170 * TWL4030 171 */ 172 #define CONFIG_TWL4030_POWER 173 #define CONFIG_TWL4030_LED 174 #define CONFIG_TWL4030_KEYPAD 175 176 #define CONFIG_OMAP_GPIO 177 #define GPIO_SLIDE 71 178 179 /* 180 * Board ONENAND Info. 181 */ 182 183 #define PART1_NAME "bootloader" 184 #define PART1_SIZE 128 185 #define PART1_MULL 1024 186 #define PART1_SUFF "k" 187 #define PART1_OFFS 0x00000000 188 #define PART1_MASK 0x00000003 189 190 #define PART2_NAME "config" 191 #define PART2_SIZE 384 192 #define PART2_MULL 1024 193 #define PART2_SUFF "k" 194 #define PART2_OFFS 0x00020000 195 #define PART2_MASK 0x00000000 196 197 #define PART3_NAME "log" 198 #define PART3_SIZE 256 199 #define PART3_MULL 1024 200 #define PART3_SUFF "k" 201 #define PART3_OFFS 0x00080000 202 #define PART3_MASK 0x00000000 203 204 #define PART4_NAME "kernel" 205 #define PART4_SIZE 2 206 #define PART4_MULL 1024*1024 207 #define PART4_SUFF "m" 208 #define PART4_OFFS 0x000c0000 209 #define PART4_MASK 0x00000000 210 211 #define PART5_NAME "initfs" 212 #define PART5_SIZE 2 213 #define PART5_MULL 1024*1024 214 #define PART5_SUFF "m" 215 #define PART5_OFFS 0x002c0000 216 #define PART5_MASK 0x00000000 217 218 #define PART6_NAME "rootfs" 219 #define PART6_SIZE 257280 220 #define PART6_MULL 1024 221 #define PART6_SUFF "k" 222 #define PART6_OFFS 0x004c0000 223 #define PART6_MASK 0x00000000 224 225 #ifdef ONENAND_SUPPORT 226 227 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 228 #define CONFIG_MTD_DEVICE 229 #define CONFIG_MTD_PARTITIONS 230 231 #ifdef UBIFS_SUPPORT 232 #define CONFIG_RBTREE 233 #define CONFIG_LZO 234 #endif 235 236 #define MTDIDS_DEFAULT "onenand0=onenand" 237 #define MTDPARTS_DEFAULT "mtdparts=onenand:" \ 238 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ 239 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ 240 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ 241 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ 242 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ 243 "-(" PART6_NAME ")" 244 245 #endif 246 247 /* Watchdog support */ 248 #define CONFIG_HW_WATCHDOG 249 250 /* 251 * Framebuffer 252 */ 253 /* Video console */ 254 #define CONFIG_VIDEO 255 #define CONFIG_CFB_CONSOLE 256 #define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */ 257 #define CONFIG_VIDEO_LOGO 258 #define VIDEO_FB_16BPP_PIXEL_SWAP 259 #define VIDEO_FB_16BPP_WORD_SWAP 260 #define CONFIG_VIDEO_SW_CURSOR 261 #define CONFIG_SPLASH_SCREEN 262 263 /* functions for cfb_console */ 264 #define VIDEO_KBD_INIT_FCT rx51_kp_init() 265 #define VIDEO_TSTC_FCT rx51_kp_tstc 266 #define VIDEO_GETC_FCT rx51_kp_getc 267 #ifndef __ASSEMBLY__ 268 struct stdio_dev; 269 int rx51_kp_init(void); 270 int rx51_kp_tstc(struct stdio_dev *sdev); 271 int rx51_kp_getc(struct stdio_dev *sdev); 272 #endif 273 274 #ifndef MTDPARTS_DEFAULT 275 #define MTDPARTS_DEFAULT 276 #endif 277 278 /* Environment information */ 279 #define CONFIG_EXTRA_ENV_SETTINGS \ 280 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 281 "usbtty=cdc_acm\0" \ 282 "stdin=vga\0" \ 283 "stdout=vga\0" \ 284 "stderr=vga\0" \ 285 "setcon=setenv stdin ${con};" \ 286 "setenv stdout ${con};" \ 287 "setenv stderr ${con}\0" \ 288 "sercon=setenv con serial; run setcon\0" \ 289 "usbcon=setenv con usbtty; run setcon\0" \ 290 "vgacon=setenv con vga; run setcon\0" \ 291 "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ 292 "switchmmc=mmc dev ${mmcnum}\0" \ 293 "kernaddr=0x82008000\0" \ 294 "initrdaddr=0x84008000\0" \ 295 "scriptaddr=0x86008000\0" \ 296 "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ 297 "${loadaddr} ${mmcfile}\0" \ 298 "kernload=setenv loadaddr ${kernaddr};" \ 299 "setenv mmcfile ${mmckernfile};" \ 300 "run fileload\0" \ 301 "initrdload=setenv loadaddr ${initrdaddr};" \ 302 "setenv mmcfile ${mmcinitrdfile};" \ 303 "run fileload\0" \ 304 "scriptload=setenv loadaddr ${scriptaddr};" \ 305 "setenv mmcfile ${mmcscriptfile};" \ 306 "run fileload\0" \ 307 "scriptboot=echo Running ${mmcscriptfile} from mmc " \ 308 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ 309 "kernboot=echo Booting ${mmckernfile} from mmc " \ 310 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ 311 "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ 312 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ 313 "attachboot=echo Booting attached kernel image ...;" \ 314 "setenv setup_omap_atag 1;" \ 315 "bootm ${attkernaddr};" \ 316 "setenv setup_omap_atag\0" \ 317 "trymmcscriptboot=if run switchmmc; then " \ 318 "if run scriptload; then " \ 319 "run scriptboot;" \ 320 "fi;" \ 321 "fi\0" \ 322 "trymmckernboot=if run switchmmc; then " \ 323 "if run kernload; then " \ 324 "run kernboot;" \ 325 "fi;" \ 326 "fi\0" \ 327 "trymmckerninitrdboot=if run switchmmc; then " \ 328 "if run initrdload; then " \ 329 "if run kernload; then " \ 330 "run kerninitrdboot;" \ 331 "fi;" \ 332 "fi; " \ 333 "fi\0" \ 334 "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ 335 "setenv mmckernfile uImage; run trymmckernboot\0" \ 336 "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ 337 "setenv mmcpart 2; run trymmcpartboot;" \ 338 "setenv mmcpart 3; run trymmcpartboot;" \ 339 "setenv mmcpart 4; run trymmcpartboot\0" \ 340 "trymmcboot=if run switchmmc; then " \ 341 "setenv mmctype fat;" \ 342 "run trymmcallpartboot;" \ 343 "setenv mmctype ext2;" \ 344 "run trymmcallpartboot;" \ 345 "setenv mmctype ext4;" \ 346 "run trymmcallpartboot;" \ 347 "fi\0" \ 348 "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ 349 "sdboot=setenv mmcnum 0; run trymmcboot\0" \ 350 "menucmd=bootmenu\0" \ 351 "bootmenu_0=Attached kernel=run attachboot\0" \ 352 "bootmenu_1=Internal eMMC=run emmcboot\0" \ 353 "bootmenu_2=External SD card=run sdboot\0" \ 354 "bootmenu_3=U-Boot boot order=boot\0" \ 355 "bootmenu_delay=30\0" \ 356 "" 357 358 #define CONFIG_PREBOOT \ 359 "setenv mmcnum 1; setenv mmcpart 1;" \ 360 "setenv mmcscriptfile bootmenu.scr;" \ 361 "if run switchmmc; then " \ 362 "setenv mmcdone true;" \ 363 "setenv mmctype fat;" \ 364 "if run scriptload; then true; else " \ 365 "setenv mmctype ext2;" \ 366 "if run scriptload; then true; else " \ 367 "setenv mmctype ext4;" \ 368 "if run scriptload; then true; else " \ 369 "setenv mmcdone false;" \ 370 "fi;" \ 371 "fi;" \ 372 "fi;" \ 373 "if ${mmcdone}; then " \ 374 "run scriptboot;" \ 375 "fi;" \ 376 "fi;" \ 377 "if run slide; then true; else " \ 378 "setenv bootmenu_delay 0;" \ 379 "setenv bootdelay 0;" \ 380 "fi" 381 382 #define CONFIG_POSTBOOTMENU \ 383 "echo;" \ 384 "echo Extra commands:;" \ 385 "echo run sercon - Use serial port for control.;" \ 386 "echo run usbcon - Use usbtty for control.;" \ 387 "echo run vgacon - Use framebuffer/keyboard.;" \ 388 "echo run sdboot - Boot from SD card slot.;" \ 389 "echo run emmcboot - Boot internal eMMC memory.;" \ 390 "echo run attachboot - Boot attached kernel image.;" \ 391 "echo" 392 393 #define CONFIG_BOOTCOMMAND \ 394 "run sdboot;" \ 395 "run emmcboot;" \ 396 "run attachboot;" \ 397 "echo" 398 399 #define CONFIG_BOOTDELAY 30 400 #define CONFIG_AUTOBOOT_KEYED 401 #define CONFIG_MENU 402 #define CONFIG_MENU_SHOW 403 404 /* 405 * Miscellaneous configurable options 406 */ 407 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 408 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 409 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 410 #define CONFIG_SYS_PROMPT "Nokia RX-51 # " 411 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 412 /* Print Buffer Size */ 413 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 414 sizeof(CONFIG_SYS_PROMPT) + 16) 415 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 416 /* Boot Argument Buffer Size */ 417 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 418 419 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 420 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ 421 422 /* default load address */ 423 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) 424 425 /* 426 * OMAP3 has 12 GP timers, they can be driven by the system clock 427 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 428 * This rate is divided by a local divisor. 429 */ 430 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 431 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 432 433 /* 434 * Stack sizes 435 * 436 * The stack sizes are set up in start.S using the settings below 437 */ 438 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 439 440 /* 441 * Physical Memory Map 442 */ 443 #define CONFIG_NR_DRAM_BANKS 2 444 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 445 446 /* 447 * FLASH and environment organization 448 */ 449 450 #define CONFIG_ENV_IS_NOWHERE 451 452 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 453 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 454 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 455 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 456 CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 457 458 /* 459 * Attached kernel image 460 */ 461 462 #define SDRAM_SIZE 0x10000000 /* 256 MB */ 463 #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) 464 465 #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ 466 #define KERNEL_OFFSET 0x40000 /* 256 kB */ 467 #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) 468 #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) 469 470 /* Reserve protected RAM for attached kernel */ 471 #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) 472 473 #endif /* __CONFIG_H */ 474