1 /* 2 * (C) Copyright 2011-2012 3 * Pali Rohár <pali.rohar@gmail.com> 4 * 5 * (C) Copyright 2010 6 * Alistair Buxton <a.j.buxton@gmail.com> 7 * 8 * Derived from Beagle Board code: 9 * (C) Copyright 2006-2008 10 * Texas Instruments. 11 * Richard Woodruff <r-woodruff2@ti.com> 12 * Syed Mohammed Khasim <x0khasim@ti.com> 13 * 14 * Configuration settings for the Nokia RX-51 aka N900. 15 * 16 * SPDX-License-Identifier: GPL-2.0+ 17 */ 18 19 #ifndef __CONFIG_H 20 #define __CONFIG_H 21 22 #define CONFIG_SYS_CACHELINE_SIZE 64 23 24 /* 25 * High Level Configuration Options 26 */ 27 28 #define CONFIG_OMAP /* in a TI OMAP core */ 29 #define CONFIG_OMAP3430 /* which is in a 3430 */ 30 #define CONFIG_OMAP3_RX51 /* working with RX51 */ 31 #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ 32 #define CONFIG_OMAP_COMMON 33 /* Common ARM Erratas */ 34 #define CONFIG_ARM_ERRATA_454179 35 #define CONFIG_ARM_ERRATA_430973 36 #define CONFIG_ARM_ERRATA_621766 37 38 #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 39 40 /* 41 * Nokia X-Loader loading secondary image to address 0x80400000 42 * NOLO loading boot image to random place, so it doesn't really 43 * matter what we set this to. We have to copy u-boot to this address 44 */ 45 #define CONFIG_SYS_TEXT_BASE 0x80008000 46 47 #define CONFIG_SDRC /* The chip has SDRC controller */ 48 49 #include <asm/arch/cpu.h> /* get chip and board defs */ 50 #include <asm/arch/omap.h> 51 #include <asm/arch/mem.h> 52 #include <linux/stringify.h> 53 54 /* 55 * Display CPU and Board information 56 */ 57 #define CONFIG_DISPLAY_CPUINFO 58 #define CONFIG_DISPLAY_BOARDINFO 59 60 /* Clock Defines */ 61 #define V_OSCK 26000000 /* Clock output from T2 */ 62 #define V_SCLK (V_OSCK >> 1) 63 64 #undef CONFIG_USE_IRQ /* no support for IRQs */ 65 #define CONFIG_MISC_INIT_R 66 #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ 67 68 #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ 69 #define CONFIG_INITRD_TAG /* enable passing initrd */ 70 #define CONFIG_REVISION_TAG /* enable passing revision tag*/ 71 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 72 73 /* 74 * Size of malloc() pool 75 */ 76 #define CONFIG_ENV_SIZE (128 << 10) 77 #define CONFIG_UBI_SIZE (512 << 10) 78 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ 79 (128 << 10)) 80 81 /* 82 * Hardware drivers 83 */ 84 85 /* 86 * NS16550 Configuration 87 */ 88 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 89 90 #define CONFIG_SYS_NS16550_SERIAL 91 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 92 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 93 94 /* 95 * select serial console configuration 96 */ 97 #define CONFIG_CONS_INDEX 3 98 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 99 #define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ 100 101 /* allow to overwrite serial and ethaddr */ 102 #define CONFIG_ENV_OVERWRITE 103 #define CONFIG_BAUDRATE 115200 104 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } 105 #define CONFIG_MMC 106 #define CONFIG_GENERIC_MMC 107 #define CONFIG_OMAP_HSMMC 108 #define CONFIG_DOS_PARTITION 109 110 /* USB */ 111 #define CONFIG_USB_MUSB_UDC 112 #define CONFIG_USB_MUSB_HCD 113 #define CONFIG_USB_OMAP3 114 #define CONFIG_TWL4030_USB 115 116 /* USB device configuration */ 117 #define CONFIG_USB_DEVICE 118 #define CONFIG_USBD_VENDORID 0x0421 119 #define CONFIG_USBD_PRODUCTID 0x01c8 120 #define CONFIG_USBD_MANUFACTURER "Nokia" 121 #define CONFIG_USBD_PRODUCT_NAME "N900" 122 123 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 124 #define CONFIG_SYS_NO_FLASH 125 126 /* commands to include */ 127 128 #define CONFIG_CMDLINE_EDITING /* add command line history */ 129 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 130 131 #define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */ 132 #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ 133 134 #ifdef ONENAND_SUPPORT 135 136 #define CONFIG_CMD_ONENAND /* ONENAND support */ 137 #define CONFIG_CMD_MTDPARTS /* mtd parts support */ 138 139 #ifdef UBIFS_SUPPORT 140 #define CONFIG_CMD_UBI /* UBI Support */ 141 #define CONFIG_CMD_UBIFS /* UBIFS Support */ 142 #endif 143 144 #endif 145 146 #define CONFIG_OMAP3_SPI 147 #define CONFIG_SYS_I2C 148 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 149 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 150 #define CONFIG_SYS_I2C_OMAP34XX 151 152 /* 153 * TWL4030 154 */ 155 #define CONFIG_TWL4030_POWER 156 #define CONFIG_TWL4030_LED 157 #define CONFIG_TWL4030_KEYPAD 158 159 #define CONFIG_OMAP_GPIO 160 #define GPIO_SLIDE 71 161 162 /* 163 * Board ONENAND Info. 164 */ 165 166 #define PART1_NAME "bootloader" 167 #define PART1_SIZE 128 168 #define PART1_MULL 1024 169 #define PART1_SUFF "k" 170 #define PART1_OFFS 0x00000000 171 #define PART1_MASK 0x00000003 172 173 #define PART2_NAME "config" 174 #define PART2_SIZE 384 175 #define PART2_MULL 1024 176 #define PART2_SUFF "k" 177 #define PART2_OFFS 0x00020000 178 #define PART2_MASK 0x00000000 179 180 #define PART3_NAME "log" 181 #define PART3_SIZE 256 182 #define PART3_MULL 1024 183 #define PART3_SUFF "k" 184 #define PART3_OFFS 0x00080000 185 #define PART3_MASK 0x00000000 186 187 #define PART4_NAME "kernel" 188 #define PART4_SIZE 2 189 #define PART4_MULL 1024*1024 190 #define PART4_SUFF "m" 191 #define PART4_OFFS 0x000c0000 192 #define PART4_MASK 0x00000000 193 194 #define PART5_NAME "initfs" 195 #define PART5_SIZE 2 196 #define PART5_MULL 1024*1024 197 #define PART5_SUFF "m" 198 #define PART5_OFFS 0x002c0000 199 #define PART5_MASK 0x00000000 200 201 #define PART6_NAME "rootfs" 202 #define PART6_SIZE 257280 203 #define PART6_MULL 1024 204 #define PART6_SUFF "k" 205 #define PART6_OFFS 0x004c0000 206 #define PART6_MASK 0x00000000 207 208 #ifdef ONENAND_SUPPORT 209 210 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 211 #define CONFIG_MTD_DEVICE 212 #define CONFIG_MTD_PARTITIONS 213 214 #ifdef UBIFS_SUPPORT 215 #define CONFIG_RBTREE 216 #define CONFIG_LZO 217 #endif 218 219 #define MTDIDS_DEFAULT "onenand0=onenand" 220 #define MTDPARTS_DEFAULT "mtdparts=onenand:" \ 221 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ 222 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ 223 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ 224 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ 225 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ 226 "-(" PART6_NAME ")" 227 228 #endif 229 230 /* Watchdog support */ 231 #define CONFIG_HW_WATCHDOG 232 233 /* 234 * Framebuffer 235 */ 236 /* Video console */ 237 #define CONFIG_VIDEO 238 #define CONFIG_CFB_CONSOLE 239 #define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */ 240 #define CONFIG_VIDEO_LOGO 241 #define VIDEO_FB_16BPP_PIXEL_SWAP 242 #define VIDEO_FB_16BPP_WORD_SWAP 243 #define CONFIG_VIDEO_SW_CURSOR 244 #define CONFIG_SPLASH_SCREEN 245 246 /* functions for cfb_console */ 247 #define VIDEO_KBD_INIT_FCT rx51_kp_init() 248 #define VIDEO_TSTC_FCT rx51_kp_tstc 249 #define VIDEO_GETC_FCT rx51_kp_getc 250 #ifndef __ASSEMBLY__ 251 struct stdio_dev; 252 int rx51_kp_init(void); 253 int rx51_kp_tstc(struct stdio_dev *sdev); 254 int rx51_kp_getc(struct stdio_dev *sdev); 255 #endif 256 257 #ifndef MTDPARTS_DEFAULT 258 #define MTDPARTS_DEFAULT 259 #endif 260 261 /* Environment information */ 262 #define CONFIG_EXTRA_ENV_SETTINGS \ 263 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 264 "usbtty=cdc_acm\0" \ 265 "stdin=vga\0" \ 266 "stdout=vga\0" \ 267 "stderr=vga\0" \ 268 "setcon=setenv stdin ${con};" \ 269 "setenv stdout ${con};" \ 270 "setenv stderr ${con}\0" \ 271 "sercon=setenv con serial; run setcon\0" \ 272 "usbcon=setenv con usbtty; run setcon\0" \ 273 "vgacon=setenv con vga; run setcon\0" \ 274 "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ 275 "switchmmc=mmc dev ${mmcnum}\0" \ 276 "kernaddr=0x82008000\0" \ 277 "initrdaddr=0x84008000\0" \ 278 "scriptaddr=0x86008000\0" \ 279 "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ 280 "${loadaddr} ${mmcfile}\0" \ 281 "kernload=setenv loadaddr ${kernaddr};" \ 282 "setenv mmcfile ${mmckernfile};" \ 283 "run fileload\0" \ 284 "initrdload=setenv loadaddr ${initrdaddr};" \ 285 "setenv mmcfile ${mmcinitrdfile};" \ 286 "run fileload\0" \ 287 "scriptload=setenv loadaddr ${scriptaddr};" \ 288 "setenv mmcfile ${mmcscriptfile};" \ 289 "run fileload\0" \ 290 "scriptboot=echo Running ${mmcscriptfile} from mmc " \ 291 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ 292 "kernboot=echo Booting ${mmckernfile} from mmc " \ 293 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ 294 "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ 295 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ 296 "attachboot=echo Booting attached kernel image ...;" \ 297 "setenv setup_omap_atag 1;" \ 298 "bootm ${attkernaddr};" \ 299 "setenv setup_omap_atag\0" \ 300 "trymmcscriptboot=if run switchmmc; then " \ 301 "if run scriptload; then " \ 302 "run scriptboot;" \ 303 "fi;" \ 304 "fi\0" \ 305 "trymmckernboot=if run switchmmc; then " \ 306 "if run kernload; then " \ 307 "run kernboot;" \ 308 "fi;" \ 309 "fi\0" \ 310 "trymmckerninitrdboot=if run switchmmc; then " \ 311 "if run initrdload; then " \ 312 "if run kernload; then " \ 313 "run kerninitrdboot;" \ 314 "fi;" \ 315 "fi; " \ 316 "fi\0" \ 317 "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ 318 "setenv mmckernfile uImage; run trymmckernboot\0" \ 319 "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ 320 "setenv mmcpart 2; run trymmcpartboot;" \ 321 "setenv mmcpart 3; run trymmcpartboot;" \ 322 "setenv mmcpart 4; run trymmcpartboot\0" \ 323 "trymmcboot=if run switchmmc; then " \ 324 "setenv mmctype fat;" \ 325 "run trymmcallpartboot;" \ 326 "setenv mmctype ext2;" \ 327 "run trymmcallpartboot;" \ 328 "setenv mmctype ext4;" \ 329 "run trymmcallpartboot;" \ 330 "fi\0" \ 331 "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ 332 "sdboot=setenv mmcnum 0; run trymmcboot\0" \ 333 "menucmd=bootmenu\0" \ 334 "bootmenu_0=Attached kernel=run attachboot\0" \ 335 "bootmenu_1=Internal eMMC=run emmcboot\0" \ 336 "bootmenu_2=External SD card=run sdboot\0" \ 337 "bootmenu_3=U-Boot boot order=boot\0" \ 338 "bootmenu_delay=30\0" \ 339 "" 340 341 #define CONFIG_PREBOOT \ 342 "setenv mmcnum 1; setenv mmcpart 1;" \ 343 "setenv mmcscriptfile bootmenu.scr;" \ 344 "if run switchmmc; then " \ 345 "setenv mmcdone true;" \ 346 "setenv mmctype fat;" \ 347 "if run scriptload; then true; else " \ 348 "setenv mmctype ext2;" \ 349 "if run scriptload; then true; else " \ 350 "setenv mmctype ext4;" \ 351 "if run scriptload; then true; else " \ 352 "setenv mmcdone false;" \ 353 "fi;" \ 354 "fi;" \ 355 "fi;" \ 356 "if ${mmcdone}; then " \ 357 "run scriptboot;" \ 358 "fi;" \ 359 "fi;" \ 360 "if run slide; then true; else " \ 361 "setenv bootmenu_delay 0;" \ 362 "setenv bootdelay 0;" \ 363 "fi" 364 365 #define CONFIG_POSTBOOTMENU \ 366 "echo;" \ 367 "echo Extra commands:;" \ 368 "echo run sercon - Use serial port for control.;" \ 369 "echo run usbcon - Use usbtty for control.;" \ 370 "echo run vgacon - Use framebuffer/keyboard.;" \ 371 "echo run sdboot - Boot from SD card slot.;" \ 372 "echo run emmcboot - Boot internal eMMC memory.;" \ 373 "echo run attachboot - Boot attached kernel image.;" \ 374 "echo" 375 376 #define CONFIG_BOOTCOMMAND \ 377 "run sdboot;" \ 378 "run emmcboot;" \ 379 "run attachboot;" \ 380 "echo" 381 382 #define CONFIG_BOOTDELAY 30 383 #define CONFIG_MENU 384 #define CONFIG_MENU_SHOW 385 386 /* 387 * Miscellaneous configurable options 388 */ 389 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 390 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 391 /* Print Buffer Size */ 392 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 393 sizeof(CONFIG_SYS_PROMPT) + 16) 394 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 395 /* Boot Argument Buffer Size */ 396 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 397 398 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 399 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ 400 401 /* default load address */ 402 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) 403 404 /* 405 * OMAP3 has 12 GP timers, they can be driven by the system clock 406 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 407 * This rate is divided by a local divisor. 408 */ 409 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 410 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 411 412 /* 413 * Stack sizes 414 * 415 * The stack sizes are set up in start.S using the settings below 416 */ 417 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 418 419 /* 420 * Physical Memory Map 421 */ 422 #define CONFIG_NR_DRAM_BANKS 2 423 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 424 425 /* 426 * FLASH and environment organization 427 */ 428 429 #define CONFIG_ENV_IS_NOWHERE 430 431 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 432 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 433 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 434 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 435 CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 436 437 /* 438 * Attached kernel image 439 */ 440 441 #define SDRAM_SIZE 0x10000000 /* 256 MB */ 442 #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) 443 444 #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ 445 #define KERNEL_OFFSET 0x40000 /* 256 kB */ 446 #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) 447 #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) 448 449 /* Reserve protected RAM for attached kernel */ 450 #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) 451 452 #endif /* __CONFIG_H */ 453