1 /* 2 * (C) Copyright 2011-2012 3 * Pali Rohár <pali.rohar@gmail.com> 4 * 5 * (C) Copyright 2010 6 * Alistair Buxton <a.j.buxton@gmail.com> 7 * 8 * Derived from Beagle Board code: 9 * (C) Copyright 2006-2008 10 * Texas Instruments. 11 * Richard Woodruff <r-woodruff2@ti.com> 12 * Syed Mohammed Khasim <x0khasim@ti.com> 13 * 14 * Configuration settings for the Nokia RX-51 aka N900. 15 * 16 * SPDX-License-Identifier: GPL-2.0+ 17 */ 18 19 #ifndef __CONFIG_H 20 #define __CONFIG_H 21 22 /* 23 * High Level Configuration Options 24 */ 25 26 #define CONFIG_OMAP /* in a TI OMAP core */ 27 #define CONFIG_OMAP3430 /* which is in a 3430 */ 28 #define CONFIG_OMAP3_RX51 /* working with RX51 */ 29 #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ 30 #define CONFIG_OMAP_COMMON 31 #define CONFIG_SYS_GENERIC_BOARD 32 /* Common ARM Erratas */ 33 #define CONFIG_ARM_ERRATA_454179 34 #define CONFIG_ARM_ERRATA_430973 35 #define CONFIG_ARM_ERRATA_621766 36 37 #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 38 39 /* 40 * Nokia X-Loader loading secondary image to address 0x80400000 41 * NOLO loading boot image to random place, so it doesn't really 42 * matter what we set this to. We have to copy u-boot to this address 43 */ 44 #define CONFIG_SYS_TEXT_BASE 0x80008000 45 46 #define CONFIG_SDRC /* The chip has SDRC controller */ 47 48 #include <asm/arch/cpu.h> /* get chip and board defs */ 49 #include <asm/arch/omap.h> 50 #include <asm/arch/mem.h> 51 #include <linux/stringify.h> 52 53 /* 54 * Display CPU and Board information 55 */ 56 #define CONFIG_DISPLAY_CPUINFO 57 #define CONFIG_DISPLAY_BOARDINFO 58 59 /* Clock Defines */ 60 #define V_OSCK 26000000 /* Clock output from T2 */ 61 #define V_SCLK (V_OSCK >> 1) 62 63 #undef CONFIG_USE_IRQ /* no support for IRQs */ 64 #define CONFIG_MISC_INIT_R 65 #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ 66 67 #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ 68 #define CONFIG_INITRD_TAG /* enable passing initrd */ 69 #define CONFIG_REVISION_TAG /* enable passing revision tag*/ 70 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 71 72 /* 73 * Size of malloc() pool 74 */ 75 #define CONFIG_ENV_SIZE (128 << 10) 76 #define CONFIG_UBI_SIZE (512 << 10) 77 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ 78 (128 << 10)) 79 80 /* 81 * Hardware drivers 82 */ 83 84 /* 85 * NS16550 Configuration 86 */ 87 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 88 89 #define CONFIG_SYS_NS16550 90 #define CONFIG_SYS_NS16550_SERIAL 91 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 92 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 93 94 /* 95 * select serial console configuration 96 */ 97 #define CONFIG_CONS_INDEX 3 98 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 99 #define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ 100 101 /* allow to overwrite serial and ethaddr */ 102 #define CONFIG_ENV_OVERWRITE 103 #define CONFIG_BAUDRATE 115200 104 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } 105 #define CONFIG_MMC 106 #define CONFIG_GENERIC_MMC 107 #define CONFIG_OMAP_HSMMC 108 #define CONFIG_DOS_PARTITION 109 110 /* USB */ 111 #define CONFIG_MUSB_UDC 112 #define CONFIG_MUSB_HDC 113 #define CONFIG_USB_OMAP3 114 #define CONFIG_TWL4030_USB 115 116 /* USB device configuration */ 117 #define CONFIG_USB_DEVICE 118 #define CONFIG_USBD_VENDORID 0x0421 119 #define CONFIG_USBD_PRODUCTID 0x01c8 120 #define CONFIG_USBD_MANUFACTURER "Nokia" 121 #define CONFIG_USBD_PRODUCT_NAME "N900" 122 123 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 124 #define CONFIG_SYS_NO_FLASH 125 126 /* commands to include */ 127 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 128 #define CONFIG_CMD_EXT4 /* EXT4 Support */ 129 #define CONFIG_CMD_FAT /* FAT support */ 130 131 #define CONFIG_CMD_I2C /* I2C serial bus support */ 132 #define CONFIG_CMD_MMC /* MMC support */ 133 #define CONFIG_CMD_GPIO /* Enable gpio command */ 134 135 #define CONFIG_CMDLINE_EDITING /* add command line history */ 136 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 137 138 #define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */ 139 #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ 140 141 #ifdef ONENAND_SUPPORT 142 143 #define CONFIG_CMD_ONENAND /* ONENAND support */ 144 #define CONFIG_CMD_MTDPARTS /* mtd parts support */ 145 146 #ifdef UBIFS_SUPPORT 147 #define CONFIG_CMD_UBI /* UBI Support */ 148 #define CONFIG_CMD_UBIFS /* UBIFS Support */ 149 #endif 150 151 #endif 152 153 #define CONFIG_OMAP3_SPI 154 #define CONFIG_SYS_I2C 155 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 156 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 157 #define CONFIG_SYS_I2C_OMAP34XX 158 159 /* 160 * TWL4030 161 */ 162 #define CONFIG_TWL4030_POWER 163 #define CONFIG_TWL4030_LED 164 #define CONFIG_TWL4030_KEYPAD 165 166 #define CONFIG_OMAP_GPIO 167 #define GPIO_SLIDE 71 168 169 /* 170 * Board ONENAND Info. 171 */ 172 173 #define PART1_NAME "bootloader" 174 #define PART1_SIZE 128 175 #define PART1_MULL 1024 176 #define PART1_SUFF "k" 177 #define PART1_OFFS 0x00000000 178 #define PART1_MASK 0x00000003 179 180 #define PART2_NAME "config" 181 #define PART2_SIZE 384 182 #define PART2_MULL 1024 183 #define PART2_SUFF "k" 184 #define PART2_OFFS 0x00020000 185 #define PART2_MASK 0x00000000 186 187 #define PART3_NAME "log" 188 #define PART3_SIZE 256 189 #define PART3_MULL 1024 190 #define PART3_SUFF "k" 191 #define PART3_OFFS 0x00080000 192 #define PART3_MASK 0x00000000 193 194 #define PART4_NAME "kernel" 195 #define PART4_SIZE 2 196 #define PART4_MULL 1024*1024 197 #define PART4_SUFF "m" 198 #define PART4_OFFS 0x000c0000 199 #define PART4_MASK 0x00000000 200 201 #define PART5_NAME "initfs" 202 #define PART5_SIZE 2 203 #define PART5_MULL 1024*1024 204 #define PART5_SUFF "m" 205 #define PART5_OFFS 0x002c0000 206 #define PART5_MASK 0x00000000 207 208 #define PART6_NAME "rootfs" 209 #define PART6_SIZE 257280 210 #define PART6_MULL 1024 211 #define PART6_SUFF "k" 212 #define PART6_OFFS 0x004c0000 213 #define PART6_MASK 0x00000000 214 215 #ifdef ONENAND_SUPPORT 216 217 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 218 #define CONFIG_MTD_DEVICE 219 #define CONFIG_MTD_PARTITIONS 220 221 #ifdef UBIFS_SUPPORT 222 #define CONFIG_RBTREE 223 #define CONFIG_LZO 224 #endif 225 226 #define MTDIDS_DEFAULT "onenand0=onenand" 227 #define MTDPARTS_DEFAULT "mtdparts=onenand:" \ 228 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ 229 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ 230 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ 231 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ 232 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ 233 "-(" PART6_NAME ")" 234 235 #endif 236 237 /* Watchdog support */ 238 #define CONFIG_HW_WATCHDOG 239 240 /* 241 * Framebuffer 242 */ 243 /* Video console */ 244 #define CONFIG_VIDEO 245 #define CONFIG_CFB_CONSOLE 246 #define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */ 247 #define CONFIG_VIDEO_LOGO 248 #define VIDEO_FB_16BPP_PIXEL_SWAP 249 #define VIDEO_FB_16BPP_WORD_SWAP 250 #define CONFIG_VIDEO_SW_CURSOR 251 #define CONFIG_SPLASH_SCREEN 252 253 /* functions for cfb_console */ 254 #define VIDEO_KBD_INIT_FCT rx51_kp_init() 255 #define VIDEO_TSTC_FCT rx51_kp_tstc 256 #define VIDEO_GETC_FCT rx51_kp_getc 257 #ifndef __ASSEMBLY__ 258 struct stdio_dev; 259 int rx51_kp_init(void); 260 int rx51_kp_tstc(struct stdio_dev *sdev); 261 int rx51_kp_getc(struct stdio_dev *sdev); 262 #endif 263 264 #ifndef MTDPARTS_DEFAULT 265 #define MTDPARTS_DEFAULT 266 #endif 267 268 /* Environment information */ 269 #define CONFIG_EXTRA_ENV_SETTINGS \ 270 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 271 "usbtty=cdc_acm\0" \ 272 "stdin=vga\0" \ 273 "stdout=vga\0" \ 274 "stderr=vga\0" \ 275 "setcon=setenv stdin ${con};" \ 276 "setenv stdout ${con};" \ 277 "setenv stderr ${con}\0" \ 278 "sercon=setenv con serial; run setcon\0" \ 279 "usbcon=setenv con usbtty; run setcon\0" \ 280 "vgacon=setenv con vga; run setcon\0" \ 281 "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ 282 "switchmmc=mmc dev ${mmcnum}\0" \ 283 "kernaddr=0x82008000\0" \ 284 "initrdaddr=0x84008000\0" \ 285 "scriptaddr=0x86008000\0" \ 286 "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ 287 "${loadaddr} ${mmcfile}\0" \ 288 "kernload=setenv loadaddr ${kernaddr};" \ 289 "setenv mmcfile ${mmckernfile};" \ 290 "run fileload\0" \ 291 "initrdload=setenv loadaddr ${initrdaddr};" \ 292 "setenv mmcfile ${mmcinitrdfile};" \ 293 "run fileload\0" \ 294 "scriptload=setenv loadaddr ${scriptaddr};" \ 295 "setenv mmcfile ${mmcscriptfile};" \ 296 "run fileload\0" \ 297 "scriptboot=echo Running ${mmcscriptfile} from mmc " \ 298 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ 299 "kernboot=echo Booting ${mmckernfile} from mmc " \ 300 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ 301 "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ 302 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ 303 "attachboot=echo Booting attached kernel image ...;" \ 304 "setenv setup_omap_atag 1;" \ 305 "bootm ${attkernaddr};" \ 306 "setenv setup_omap_atag\0" \ 307 "trymmcscriptboot=if run switchmmc; then " \ 308 "if run scriptload; then " \ 309 "run scriptboot;" \ 310 "fi;" \ 311 "fi\0" \ 312 "trymmckernboot=if run switchmmc; then " \ 313 "if run kernload; then " \ 314 "run kernboot;" \ 315 "fi;" \ 316 "fi\0" \ 317 "trymmckerninitrdboot=if run switchmmc; then " \ 318 "if run initrdload; then " \ 319 "if run kernload; then " \ 320 "run kerninitrdboot;" \ 321 "fi;" \ 322 "fi; " \ 323 "fi\0" \ 324 "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ 325 "setenv mmckernfile uImage; run trymmckernboot\0" \ 326 "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ 327 "setenv mmcpart 2; run trymmcpartboot;" \ 328 "setenv mmcpart 3; run trymmcpartboot;" \ 329 "setenv mmcpart 4; run trymmcpartboot\0" \ 330 "trymmcboot=if run switchmmc; then " \ 331 "setenv mmctype fat;" \ 332 "run trymmcallpartboot;" \ 333 "setenv mmctype ext2;" \ 334 "run trymmcallpartboot;" \ 335 "setenv mmctype ext4;" \ 336 "run trymmcallpartboot;" \ 337 "fi\0" \ 338 "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ 339 "sdboot=setenv mmcnum 0; run trymmcboot\0" \ 340 "menucmd=bootmenu\0" \ 341 "bootmenu_0=Attached kernel=run attachboot\0" \ 342 "bootmenu_1=Internal eMMC=run emmcboot\0" \ 343 "bootmenu_2=External SD card=run sdboot\0" \ 344 "bootmenu_3=U-Boot boot order=boot\0" \ 345 "bootmenu_delay=30\0" \ 346 "" 347 348 #define CONFIG_PREBOOT \ 349 "setenv mmcnum 1; setenv mmcpart 1;" \ 350 "setenv mmcscriptfile bootmenu.scr;" \ 351 "if run switchmmc; then " \ 352 "setenv mmcdone true;" \ 353 "setenv mmctype fat;" \ 354 "if run scriptload; then true; else " \ 355 "setenv mmctype ext2;" \ 356 "if run scriptload; then true; else " \ 357 "setenv mmctype ext4;" \ 358 "if run scriptload; then true; else " \ 359 "setenv mmcdone false;" \ 360 "fi;" \ 361 "fi;" \ 362 "fi;" \ 363 "if ${mmcdone}; then " \ 364 "run scriptboot;" \ 365 "fi;" \ 366 "fi;" \ 367 "if run slide; then true; else " \ 368 "setenv bootmenu_delay 0;" \ 369 "setenv bootdelay 0;" \ 370 "fi" 371 372 #define CONFIG_POSTBOOTMENU \ 373 "echo;" \ 374 "echo Extra commands:;" \ 375 "echo run sercon - Use serial port for control.;" \ 376 "echo run usbcon - Use usbtty for control.;" \ 377 "echo run vgacon - Use framebuffer/keyboard.;" \ 378 "echo run sdboot - Boot from SD card slot.;" \ 379 "echo run emmcboot - Boot internal eMMC memory.;" \ 380 "echo run attachboot - Boot attached kernel image.;" \ 381 "echo" 382 383 #define CONFIG_BOOTCOMMAND \ 384 "run sdboot;" \ 385 "run emmcboot;" \ 386 "run attachboot;" \ 387 "echo" 388 389 #define CONFIG_BOOTDELAY 30 390 #define CONFIG_MENU 391 #define CONFIG_MENU_SHOW 392 393 /* 394 * Miscellaneous configurable options 395 */ 396 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 397 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 398 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 399 #define CONFIG_SYS_PROMPT "Nokia RX-51 # " 400 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 401 /* Print Buffer Size */ 402 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 403 sizeof(CONFIG_SYS_PROMPT) + 16) 404 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 405 /* Boot Argument Buffer Size */ 406 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 407 408 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 409 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ 410 411 /* default load address */ 412 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) 413 414 /* 415 * OMAP3 has 12 GP timers, they can be driven by the system clock 416 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 417 * This rate is divided by a local divisor. 418 */ 419 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 420 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 421 422 /* 423 * Stack sizes 424 * 425 * The stack sizes are set up in start.S using the settings below 426 */ 427 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 428 429 /* 430 * Physical Memory Map 431 */ 432 #define CONFIG_NR_DRAM_BANKS 2 433 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 434 435 /* 436 * FLASH and environment organization 437 */ 438 439 #define CONFIG_ENV_IS_NOWHERE 440 441 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 442 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 443 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 444 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 445 CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 446 447 /* 448 * Attached kernel image 449 */ 450 451 #define SDRAM_SIZE 0x10000000 /* 256 MB */ 452 #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) 453 454 #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ 455 #define KERNEL_OFFSET 0x40000 /* 256 kB */ 456 #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) 457 #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) 458 459 /* Reserve protected RAM for attached kernel */ 460 #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) 461 462 #endif /* __CONFIG_H */ 463