1 /* 2 * (C) Copyright 2011-2012 3 * Pali Rohár <pali.rohar@gmail.com> 4 * 5 * (C) Copyright 2010 6 * Alistair Buxton <a.j.buxton@gmail.com> 7 * 8 * Derived from Beagle Board code: 9 * (C) Copyright 2006-2008 10 * Texas Instruments. 11 * Richard Woodruff <r-woodruff2@ti.com> 12 * Syed Mohammed Khasim <x0khasim@ti.com> 13 * 14 * Configuration settings for the Nokia RX-51 aka N900. 15 * 16 * SPDX-License-Identifier: GPL-2.0+ 17 */ 18 19 #ifndef __CONFIG_H 20 #define __CONFIG_H 21 22 /* 23 * High Level Configuration Options 24 */ 25 26 #define CONFIG_OMAP /* in a TI OMAP core */ 27 #define CONFIG_OMAP3430 /* which is in a 3430 */ 28 #define CONFIG_OMAP3_RX51 /* working with RX51 */ 29 #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ 30 31 #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 32 33 /* 34 * Nokia X-Loader loading secondary image to address 0x80400000 35 * NOLO loading boot image to random place, so it doesn't really 36 * matter what we set this to. We have to copy u-boot to this address 37 */ 38 #define CONFIG_SYS_TEXT_BASE 0x80008000 39 40 #define CONFIG_SDRC /* The chip has SDRC controller */ 41 42 #include <asm/arch/cpu.h> /* get chip and board defs */ 43 #include <asm/arch/omap.h> 44 #include <asm/arch/mem.h> 45 #include <linux/stringify.h> 46 47 /* Clock Defines */ 48 #define V_OSCK 26000000 /* Clock output from T2 */ 49 #define V_SCLK (V_OSCK >> 1) 50 51 #undef CONFIG_USE_IRQ /* no support for IRQs */ 52 #define CONFIG_MISC_INIT_R 53 #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ 54 55 #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ 56 #define CONFIG_INITRD_TAG /* enable passing initrd */ 57 #define CONFIG_REVISION_TAG /* enable passing revision tag*/ 58 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 59 60 /* 61 * Size of malloc() pool 62 */ 63 #define CONFIG_ENV_SIZE (128 << 10) 64 #define CONFIG_UBI_SIZE (512 << 10) 65 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ 66 (128 << 10)) 67 68 /* 69 * Hardware drivers 70 */ 71 72 /* 73 * NS16550 Configuration 74 */ 75 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 76 77 #define CONFIG_SYS_NS16550_SERIAL 78 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 79 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 80 81 /* 82 * select serial console configuration 83 */ 84 #define CONFIG_CONS_INDEX 3 85 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 86 #define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ 87 88 /* allow to overwrite serial and ethaddr */ 89 #define CONFIG_ENV_OVERWRITE 90 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } 91 92 /* USB */ 93 #define CONFIG_USB_MUSB_UDC 94 #define CONFIG_USB_MUSB_HCD 95 #define CONFIG_USB_OMAP3 96 #define CONFIG_TWL4030_USB 97 98 /* USB device configuration */ 99 #define CONFIG_USB_DEVICE 100 #define CONFIG_USBD_VENDORID 0x0421 101 #define CONFIG_USBD_PRODUCTID 0x01c8 102 #define CONFIG_USBD_MANUFACTURER "Nokia" 103 #define CONFIG_USBD_PRODUCT_NAME "N900" 104 105 /* commands to include */ 106 107 #define CONFIG_CMDLINE_EDITING /* add command line history */ 108 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 109 110 #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ 111 112 #ifdef ONENAND_SUPPORT 113 114 #define CONFIG_CMD_ONENAND /* ONENAND support */ 115 #define CONFIG_CMD_MTDPARTS /* mtd parts support */ 116 117 #ifdef UBIFS_SUPPORT 118 #define CONFIG_CMD_UBIFS /* UBIFS Support */ 119 #endif 120 121 #endif 122 123 #define CONFIG_OMAP3_SPI 124 #define CONFIG_SYS_I2C 125 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 126 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 127 #define CONFIG_SYS_I2C_OMAP34XX 128 129 /* 130 * TWL4030 131 */ 132 #define CONFIG_TWL4030_POWER 133 #define CONFIG_TWL4030_LED 134 #define CONFIG_TWL4030_KEYPAD 135 136 #define CONFIG_OMAP_GPIO 137 #define GPIO_SLIDE 71 138 139 /* 140 * Board ONENAND Info. 141 */ 142 143 #define PART1_NAME "bootloader" 144 #define PART1_SIZE 128 145 #define PART1_MULL 1024 146 #define PART1_SUFF "k" 147 #define PART1_OFFS 0x00000000 148 #define PART1_MASK 0x00000003 149 150 #define PART2_NAME "config" 151 #define PART2_SIZE 384 152 #define PART2_MULL 1024 153 #define PART2_SUFF "k" 154 #define PART2_OFFS 0x00020000 155 #define PART2_MASK 0x00000000 156 157 #define PART3_NAME "log" 158 #define PART3_SIZE 256 159 #define PART3_MULL 1024 160 #define PART3_SUFF "k" 161 #define PART3_OFFS 0x00080000 162 #define PART3_MASK 0x00000000 163 164 #define PART4_NAME "kernel" 165 #define PART4_SIZE 2 166 #define PART4_MULL 1024*1024 167 #define PART4_SUFF "m" 168 #define PART4_OFFS 0x000c0000 169 #define PART4_MASK 0x00000000 170 171 #define PART5_NAME "initfs" 172 #define PART5_SIZE 2 173 #define PART5_MULL 1024*1024 174 #define PART5_SUFF "m" 175 #define PART5_OFFS 0x002c0000 176 #define PART5_MASK 0x00000000 177 178 #define PART6_NAME "rootfs" 179 #define PART6_SIZE 257280 180 #define PART6_MULL 1024 181 #define PART6_SUFF "k" 182 #define PART6_OFFS 0x004c0000 183 #define PART6_MASK 0x00000000 184 185 #ifdef ONENAND_SUPPORT 186 187 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 188 #define CONFIG_MTD_DEVICE 189 #define CONFIG_MTD_PARTITIONS 190 191 #ifdef UBIFS_SUPPORT 192 #define CONFIG_RBTREE 193 #define CONFIG_LZO 194 #endif 195 196 #define MTDIDS_DEFAULT "onenand0=onenand" 197 #define MTDPARTS_DEFAULT "mtdparts=onenand:" \ 198 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ 199 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ 200 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ 201 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ 202 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ 203 "-(" PART6_NAME ")" 204 205 #endif 206 207 /* Watchdog support */ 208 #define CONFIG_HW_WATCHDOG 209 210 /* 211 * Framebuffer 212 */ 213 /* Video console */ 214 #define CONFIG_VIDEO_LOGO 215 #define VIDEO_FB_16BPP_PIXEL_SWAP 216 #define VIDEO_FB_16BPP_WORD_SWAP 217 #define CONFIG_SPLASH_SCREEN 218 219 /* functions for cfb_console */ 220 #define VIDEO_KBD_INIT_FCT rx51_kp_init() 221 #define VIDEO_TSTC_FCT rx51_kp_tstc 222 #define VIDEO_GETC_FCT rx51_kp_getc 223 #ifndef __ASSEMBLY__ 224 struct stdio_dev; 225 int rx51_kp_init(void); 226 int rx51_kp_tstc(struct stdio_dev *sdev); 227 int rx51_kp_getc(struct stdio_dev *sdev); 228 #endif 229 230 #ifndef MTDPARTS_DEFAULT 231 #define MTDPARTS_DEFAULT 232 #endif 233 234 /* Environment information */ 235 #define CONFIG_EXTRA_ENV_SETTINGS \ 236 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 237 "usbtty=cdc_acm\0" \ 238 "stdin=vga\0" \ 239 "stdout=vga\0" \ 240 "stderr=vga\0" \ 241 "setcon=setenv stdin ${con};" \ 242 "setenv stdout ${con};" \ 243 "setenv stderr ${con}\0" \ 244 "sercon=setenv con serial; run setcon\0" \ 245 "usbcon=setenv con usbtty; run setcon\0" \ 246 "vgacon=setenv con vga; run setcon\0" \ 247 "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ 248 "switchmmc=mmc dev ${mmcnum}\0" \ 249 "kernaddr=0x82008000\0" \ 250 "initrdaddr=0x84008000\0" \ 251 "scriptaddr=0x86008000\0" \ 252 "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ 253 "${loadaddr} ${mmcfile}\0" \ 254 "kernload=setenv loadaddr ${kernaddr};" \ 255 "setenv mmcfile ${mmckernfile};" \ 256 "run fileload\0" \ 257 "initrdload=setenv loadaddr ${initrdaddr};" \ 258 "setenv mmcfile ${mmcinitrdfile};" \ 259 "run fileload\0" \ 260 "scriptload=setenv loadaddr ${scriptaddr};" \ 261 "setenv mmcfile ${mmcscriptfile};" \ 262 "run fileload\0" \ 263 "scriptboot=echo Running ${mmcscriptfile} from mmc " \ 264 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ 265 "kernboot=echo Booting ${mmckernfile} from mmc " \ 266 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ 267 "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ 268 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ 269 "attachboot=echo Booting attached kernel image ...;" \ 270 "setenv setup_omap_atag 1;" \ 271 "bootm ${attkernaddr};" \ 272 "setenv setup_omap_atag\0" \ 273 "trymmcscriptboot=if run switchmmc; then " \ 274 "if run scriptload; then " \ 275 "run scriptboot;" \ 276 "fi;" \ 277 "fi\0" \ 278 "trymmckernboot=if run switchmmc; then " \ 279 "if run kernload; then " \ 280 "run kernboot;" \ 281 "fi;" \ 282 "fi\0" \ 283 "trymmckerninitrdboot=if run switchmmc; then " \ 284 "if run initrdload; then " \ 285 "if run kernload; then " \ 286 "run kerninitrdboot;" \ 287 "fi;" \ 288 "fi; " \ 289 "fi\0" \ 290 "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ 291 "setenv mmckernfile uImage; run trymmckernboot\0" \ 292 "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ 293 "setenv mmcpart 2; run trymmcpartboot;" \ 294 "setenv mmcpart 3; run trymmcpartboot;" \ 295 "setenv mmcpart 4; run trymmcpartboot\0" \ 296 "trymmcboot=if run switchmmc; then " \ 297 "setenv mmctype fat;" \ 298 "run trymmcallpartboot;" \ 299 "setenv mmctype ext2;" \ 300 "run trymmcallpartboot;" \ 301 "setenv mmctype ext4;" \ 302 "run trymmcallpartboot;" \ 303 "fi\0" \ 304 "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ 305 "sdboot=setenv mmcnum 0; run trymmcboot\0" \ 306 "menucmd=bootmenu\0" \ 307 "bootmenu_0=Attached kernel=run attachboot\0" \ 308 "bootmenu_1=Internal eMMC=run emmcboot\0" \ 309 "bootmenu_2=External SD card=run sdboot\0" \ 310 "bootmenu_3=U-Boot boot order=boot\0" \ 311 "bootmenu_delay=30\0" \ 312 "" 313 314 #define CONFIG_PREBOOT \ 315 "setenv mmcnum 1; setenv mmcpart 1;" \ 316 "setenv mmcscriptfile bootmenu.scr;" \ 317 "if run switchmmc; then " \ 318 "setenv mmcdone true;" \ 319 "setenv mmctype fat;" \ 320 "if run scriptload; then true; else " \ 321 "setenv mmctype ext2;" \ 322 "if run scriptload; then true; else " \ 323 "setenv mmctype ext4;" \ 324 "if run scriptload; then true; else " \ 325 "setenv mmcdone false;" \ 326 "fi;" \ 327 "fi;" \ 328 "fi;" \ 329 "if ${mmcdone}; then " \ 330 "run scriptboot;" \ 331 "fi;" \ 332 "fi;" \ 333 "if run slide; then true; else " \ 334 "setenv bootmenu_delay 0;" \ 335 "setenv bootdelay 0;" \ 336 "fi" 337 338 #define CONFIG_POSTBOOTMENU \ 339 "echo;" \ 340 "echo Extra commands:;" \ 341 "echo run sercon - Use serial port for control.;" \ 342 "echo run usbcon - Use usbtty for control.;" \ 343 "echo run vgacon - Use framebuffer/keyboard.;" \ 344 "echo run sdboot - Boot from SD card slot.;" \ 345 "echo run emmcboot - Boot internal eMMC memory.;" \ 346 "echo run attachboot - Boot attached kernel image.;" \ 347 "echo" 348 349 #define CONFIG_BOOTCOMMAND \ 350 "run sdboot;" \ 351 "run emmcboot;" \ 352 "run attachboot;" \ 353 "echo" 354 355 #define CONFIG_MENU_SHOW 356 357 /* 358 * Miscellaneous configurable options 359 */ 360 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 361 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 362 /* Print Buffer Size */ 363 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 364 sizeof(CONFIG_SYS_PROMPT) + 16) 365 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 366 /* Boot Argument Buffer Size */ 367 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 368 369 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 370 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ 371 372 /* default load address */ 373 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) 374 375 /* 376 * OMAP3 has 12 GP timers, they can be driven by the system clock 377 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 378 * This rate is divided by a local divisor. 379 */ 380 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 381 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 382 383 /* 384 * Stack sizes 385 * 386 * The stack sizes are set up in start.S using the settings below 387 */ 388 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 389 390 /* 391 * Physical Memory Map 392 */ 393 #define CONFIG_NR_DRAM_BANKS 2 394 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 395 396 /* 397 * FLASH and environment organization 398 */ 399 400 #define CONFIG_ENV_IS_NOWHERE 401 402 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 403 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 404 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 405 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 406 CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 407 408 /* 409 * Attached kernel image 410 */ 411 412 #define SDRAM_SIZE 0x10000000 /* 256 MB */ 413 #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) 414 415 #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ 416 #define KERNEL_OFFSET 0x40000 /* 256 kB */ 417 #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) 418 #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) 419 420 /* Reserve protected RAM for attached kernel */ 421 #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) 422 423 #endif /* __CONFIG_H */ 424