1 /* 2 * (C) Copyright 2011-2012 3 * Pali Rohár <pali.rohar@gmail.com> 4 * 5 * (C) Copyright 2010 6 * Alistair Buxton <a.j.buxton@gmail.com> 7 * 8 * Derived from Beagle Board code: 9 * (C) Copyright 2006-2008 10 * Texas Instruments. 11 * Richard Woodruff <r-woodruff2@ti.com> 12 * Syed Mohammed Khasim <x0khasim@ti.com> 13 * 14 * Configuration settings for the Nokia RX-51 aka N900. 15 * 16 * SPDX-License-Identifier: GPL-2.0+ 17 */ 18 19 #ifndef __CONFIG_H 20 #define __CONFIG_H 21 22 /* 23 * High Level Configuration Options 24 */ 25 26 #define CONFIG_OMAP /* in a TI OMAP core */ 27 #define CONFIG_OMAP3430 /* which is in a 3430 */ 28 #define CONFIG_OMAP3_RX51 /* working with RX51 */ 29 #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ 30 31 #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 32 33 /* 34 * Nokia X-Loader loading secondary image to address 0x80400000 35 * NOLO loading boot image to random place, so it doesn't really 36 * matter what we set this to. We have to copy u-boot to this address 37 */ 38 #define CONFIG_SYS_TEXT_BASE 0x80008000 39 40 #define CONFIG_SDRC /* The chip has SDRC controller */ 41 42 #include <asm/arch/cpu.h> /* get chip and board defs */ 43 #include <asm/arch/omap.h> 44 #include <asm/arch/mem.h> 45 #include <linux/stringify.h> 46 47 /* Clock Defines */ 48 #define V_OSCK 26000000 /* Clock output from T2 */ 49 #define V_SCLK (V_OSCK >> 1) 50 51 #define CONFIG_MISC_INIT_R 52 #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ 53 54 #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ 55 #define CONFIG_INITRD_TAG /* enable passing initrd */ 56 #define CONFIG_REVISION_TAG /* enable passing revision tag*/ 57 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 58 59 /* 60 * Size of malloc() pool 61 */ 62 #define CONFIG_ENV_SIZE (128 << 10) 63 #define CONFIG_UBI_SIZE (512 << 10) 64 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ 65 (128 << 10)) 66 67 /* 68 * Hardware drivers 69 */ 70 71 /* 72 * NS16550 Configuration 73 */ 74 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 75 76 #define CONFIG_SYS_NS16550_SERIAL 77 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 78 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 79 80 /* 81 * select serial console configuration 82 */ 83 #define CONFIG_CONS_INDEX 3 84 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 85 #define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ 86 87 /* allow to overwrite serial and ethaddr */ 88 #define CONFIG_ENV_OVERWRITE 89 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } 90 91 /* USB */ 92 #define CONFIG_USB_MUSB_UDC 93 #define CONFIG_USB_MUSB_HCD 94 #define CONFIG_USB_OMAP3 95 #define CONFIG_TWL4030_USB 96 97 /* USB device configuration */ 98 #define CONFIG_USB_DEVICE 99 #define CONFIG_USBD_VENDORID 0x0421 100 #define CONFIG_USBD_PRODUCTID 0x01c8 101 #define CONFIG_USBD_MANUFACTURER "Nokia" 102 #define CONFIG_USBD_PRODUCT_NAME "N900" 103 104 /* commands to include */ 105 106 #define CONFIG_CMDLINE_EDITING /* add command line history */ 107 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 108 109 #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ 110 111 #ifdef ONENAND_SUPPORT 112 113 #define CONFIG_CMD_ONENAND /* ONENAND support */ 114 #define CONFIG_CMD_MTDPARTS /* mtd parts support */ 115 116 #ifdef UBIFS_SUPPORT 117 #define CONFIG_CMD_UBIFS /* UBIFS Support */ 118 #endif 119 120 #endif 121 122 #define CONFIG_OMAP3_SPI 123 #define CONFIG_SYS_I2C 124 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 125 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 126 #define CONFIG_SYS_I2C_OMAP34XX 127 128 /* 129 * TWL4030 130 */ 131 #define CONFIG_TWL4030_POWER 132 #define CONFIG_TWL4030_LED 133 #define CONFIG_TWL4030_KEYPAD 134 135 #define CONFIG_OMAP_GPIO 136 #define GPIO_SLIDE 71 137 138 /* 139 * Board ONENAND Info. 140 */ 141 142 #define PART1_NAME "bootloader" 143 #define PART1_SIZE 128 144 #define PART1_MULL 1024 145 #define PART1_SUFF "k" 146 #define PART1_OFFS 0x00000000 147 #define PART1_MASK 0x00000003 148 149 #define PART2_NAME "config" 150 #define PART2_SIZE 384 151 #define PART2_MULL 1024 152 #define PART2_SUFF "k" 153 #define PART2_OFFS 0x00020000 154 #define PART2_MASK 0x00000000 155 156 #define PART3_NAME "log" 157 #define PART3_SIZE 256 158 #define PART3_MULL 1024 159 #define PART3_SUFF "k" 160 #define PART3_OFFS 0x00080000 161 #define PART3_MASK 0x00000000 162 163 #define PART4_NAME "kernel" 164 #define PART4_SIZE 2 165 #define PART4_MULL 1024*1024 166 #define PART4_SUFF "m" 167 #define PART4_OFFS 0x000c0000 168 #define PART4_MASK 0x00000000 169 170 #define PART5_NAME "initfs" 171 #define PART5_SIZE 2 172 #define PART5_MULL 1024*1024 173 #define PART5_SUFF "m" 174 #define PART5_OFFS 0x002c0000 175 #define PART5_MASK 0x00000000 176 177 #define PART6_NAME "rootfs" 178 #define PART6_SIZE 257280 179 #define PART6_MULL 1024 180 #define PART6_SUFF "k" 181 #define PART6_OFFS 0x004c0000 182 #define PART6_MASK 0x00000000 183 184 #ifdef ONENAND_SUPPORT 185 186 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 187 #define CONFIG_MTD_DEVICE 188 #define CONFIG_MTD_PARTITIONS 189 190 #ifdef UBIFS_SUPPORT 191 #define CONFIG_RBTREE 192 #define CONFIG_LZO 193 #endif 194 195 #define MTDIDS_DEFAULT "onenand0=onenand" 196 #define MTDPARTS_DEFAULT "mtdparts=onenand:" \ 197 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ 198 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ 199 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ 200 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ 201 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ 202 "-(" PART6_NAME ")" 203 204 #endif 205 206 /* Watchdog support */ 207 #define CONFIG_HW_WATCHDOG 208 209 /* 210 * Framebuffer 211 */ 212 /* Video console */ 213 #define CONFIG_VIDEO_LOGO 214 #define VIDEO_FB_16BPP_PIXEL_SWAP 215 #define VIDEO_FB_16BPP_WORD_SWAP 216 #define CONFIG_SPLASH_SCREEN 217 218 /* functions for cfb_console */ 219 #define VIDEO_KBD_INIT_FCT rx51_kp_init() 220 #define VIDEO_TSTC_FCT rx51_kp_tstc 221 #define VIDEO_GETC_FCT rx51_kp_getc 222 #ifndef __ASSEMBLY__ 223 struct stdio_dev; 224 int rx51_kp_init(void); 225 int rx51_kp_tstc(struct stdio_dev *sdev); 226 int rx51_kp_getc(struct stdio_dev *sdev); 227 #endif 228 229 #ifndef MTDPARTS_DEFAULT 230 #define MTDPARTS_DEFAULT 231 #endif 232 233 /* Environment information */ 234 #define CONFIG_EXTRA_ENV_SETTINGS \ 235 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 236 "usbtty=cdc_acm\0" \ 237 "stdin=vga\0" \ 238 "stdout=vga\0" \ 239 "stderr=vga\0" \ 240 "setcon=setenv stdin ${con};" \ 241 "setenv stdout ${con};" \ 242 "setenv stderr ${con}\0" \ 243 "sercon=setenv con serial; run setcon\0" \ 244 "usbcon=setenv con usbtty; run setcon\0" \ 245 "vgacon=setenv con vga; run setcon\0" \ 246 "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ 247 "switchmmc=mmc dev ${mmcnum}\0" \ 248 "kernaddr=0x82008000\0" \ 249 "initrdaddr=0x84008000\0" \ 250 "scriptaddr=0x86008000\0" \ 251 "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ 252 "${loadaddr} ${mmcfile}\0" \ 253 "kernload=setenv loadaddr ${kernaddr};" \ 254 "setenv mmcfile ${mmckernfile};" \ 255 "run fileload\0" \ 256 "initrdload=setenv loadaddr ${initrdaddr};" \ 257 "setenv mmcfile ${mmcinitrdfile};" \ 258 "run fileload\0" \ 259 "scriptload=setenv loadaddr ${scriptaddr};" \ 260 "setenv mmcfile ${mmcscriptfile};" \ 261 "run fileload\0" \ 262 "scriptboot=echo Running ${mmcscriptfile} from mmc " \ 263 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ 264 "kernboot=echo Booting ${mmckernfile} from mmc " \ 265 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ 266 "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ 267 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ 268 "attachboot=echo Booting attached kernel image ...;" \ 269 "setenv setup_omap_atag 1;" \ 270 "bootm ${attkernaddr};" \ 271 "setenv setup_omap_atag\0" \ 272 "trymmcscriptboot=if run switchmmc; then " \ 273 "if run scriptload; then " \ 274 "run scriptboot;" \ 275 "fi;" \ 276 "fi\0" \ 277 "trymmckernboot=if run switchmmc; then " \ 278 "if run kernload; then " \ 279 "run kernboot;" \ 280 "fi;" \ 281 "fi\0" \ 282 "trymmckerninitrdboot=if run switchmmc; then " \ 283 "if run initrdload; then " \ 284 "if run kernload; then " \ 285 "run kerninitrdboot;" \ 286 "fi;" \ 287 "fi; " \ 288 "fi\0" \ 289 "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ 290 "setenv mmckernfile uImage; run trymmckernboot\0" \ 291 "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ 292 "setenv mmcpart 2; run trymmcpartboot;" \ 293 "setenv mmcpart 3; run trymmcpartboot;" \ 294 "setenv mmcpart 4; run trymmcpartboot\0" \ 295 "trymmcboot=if run switchmmc; then " \ 296 "setenv mmctype fat;" \ 297 "run trymmcallpartboot;" \ 298 "setenv mmctype ext2;" \ 299 "run trymmcallpartboot;" \ 300 "setenv mmctype ext4;" \ 301 "run trymmcallpartboot;" \ 302 "fi\0" \ 303 "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ 304 "sdboot=setenv mmcnum 0; run trymmcboot\0" \ 305 "menucmd=bootmenu\0" \ 306 "bootmenu_0=Attached kernel=run attachboot\0" \ 307 "bootmenu_1=Internal eMMC=run emmcboot\0" \ 308 "bootmenu_2=External SD card=run sdboot\0" \ 309 "bootmenu_3=U-Boot boot order=boot\0" \ 310 "bootmenu_delay=30\0" \ 311 "" 312 313 #define CONFIG_PREBOOT \ 314 "setenv mmcnum 1; setenv mmcpart 1;" \ 315 "setenv mmcscriptfile bootmenu.scr;" \ 316 "if run switchmmc; then " \ 317 "setenv mmcdone true;" \ 318 "setenv mmctype fat;" \ 319 "if run scriptload; then true; else " \ 320 "setenv mmctype ext2;" \ 321 "if run scriptload; then true; else " \ 322 "setenv mmctype ext4;" \ 323 "if run scriptload; then true; else " \ 324 "setenv mmcdone false;" \ 325 "fi;" \ 326 "fi;" \ 327 "fi;" \ 328 "if ${mmcdone}; then " \ 329 "run scriptboot;" \ 330 "fi;" \ 331 "fi;" \ 332 "if run slide; then true; else " \ 333 "setenv bootmenu_delay 0;" \ 334 "setenv bootdelay 0;" \ 335 "fi" 336 337 #define CONFIG_POSTBOOTMENU \ 338 "echo;" \ 339 "echo Extra commands:;" \ 340 "echo run sercon - Use serial port for control.;" \ 341 "echo run usbcon - Use usbtty for control.;" \ 342 "echo run vgacon - Use framebuffer/keyboard.;" \ 343 "echo run sdboot - Boot from SD card slot.;" \ 344 "echo run emmcboot - Boot internal eMMC memory.;" \ 345 "echo run attachboot - Boot attached kernel image.;" \ 346 "echo" 347 348 #define CONFIG_BOOTCOMMAND \ 349 "run sdboot;" \ 350 "run emmcboot;" \ 351 "run attachboot;" \ 352 "echo" 353 354 #define CONFIG_MENU_SHOW 355 356 /* 357 * Miscellaneous configurable options 358 */ 359 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 360 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 361 /* Print Buffer Size */ 362 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 363 sizeof(CONFIG_SYS_PROMPT) + 16) 364 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 365 /* Boot Argument Buffer Size */ 366 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 367 368 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 369 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ 370 371 /* default load address */ 372 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) 373 374 /* 375 * OMAP3 has 12 GP timers, they can be driven by the system clock 376 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 377 * This rate is divided by a local divisor. 378 */ 379 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 380 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 381 382 /* 383 * Physical Memory Map 384 */ 385 #define CONFIG_NR_DRAM_BANKS 2 386 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 387 388 /* 389 * FLASH and environment organization 390 */ 391 392 #define CONFIG_ENV_IS_NOWHERE 393 394 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 395 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 396 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 397 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 398 CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 399 400 /* 401 * Attached kernel image 402 */ 403 404 #define SDRAM_SIZE 0x10000000 /* 256 MB */ 405 #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) 406 407 #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ 408 #define KERNEL_OFFSET 0x40000 /* 256 kB */ 409 #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) 410 #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) 411 412 /* Reserve protected RAM for attached kernel */ 413 #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) 414 415 #endif /* __CONFIG_H */ 416