1 /* 2 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * Configuration settings for the Boundary Devices Nitrogen6X 5 * and Freescale i.MX6Q Sabre Lite boards. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include "mx6_common.h" 14 #define CONFIG_MX6 15 #define CONFIG_DISPLAY_CPUINFO 16 #define CONFIG_DISPLAY_BOARDINFO 17 18 #define CONFIG_MACH_TYPE 3769 19 20 #include <asm/arch/imx-regs.h> 21 #include <asm/imx-common/gpio.h> 22 23 #define CONFIG_CMDLINE_TAG 24 #define CONFIG_SETUP_MEMORY_TAGS 25 #define CONFIG_INITRD_TAG 26 #define CONFIG_REVISION_TAG 27 #define CONFIG_SYS_GENERIC_BOARD 28 29 /* Size of malloc() pool */ 30 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 31 32 #define CONFIG_BOARD_EARLY_INIT_F 33 #define CONFIG_MISC_INIT_R 34 #define CONFIG_MXC_GPIO 35 #define CONFIG_CMD_GPIO 36 #define CONFIG_CI_UDC 37 #define CONFIG_USBD_HS 38 #define CONFIG_USB_GADGET_DUALSPEED 39 #define CONFIG_USB_ETHER 40 #define CONFIG_USB_ETH_CDC 41 #define CONFIG_NETCONSOLE 42 43 #define CONFIG_CMD_FUSE 44 #ifdef CONFIG_CMD_FUSE 45 #define CONFIG_MXC_OCOTP 46 #endif 47 48 #define CONFIG_MXC_UART 49 #define CONFIG_MXC_UART_BASE UART2_BASE 50 51 #define CONFIG_CMD_SF 52 #ifdef CONFIG_CMD_SF 53 #define CONFIG_SPI_FLASH 54 #define CONFIG_SPI_FLASH_SST 55 #define CONFIG_MXC_SPI 56 #define CONFIG_SF_DEFAULT_BUS 0 57 #define CONFIG_SF_DEFAULT_CS 0 58 #define CONFIG_SF_DEFAULT_SPEED 25000000 59 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) 60 #endif 61 62 /* I2C Configs */ 63 #define CONFIG_CMD_I2C 64 #define CONFIG_SYS_I2C 65 #define CONFIG_SYS_I2C_MXC 66 #define CONFIG_SYS_I2C_SPEED 100000 67 #define CONFIG_I2C_EDID 68 69 /* MMC Configs */ 70 #define CONFIG_FSL_ESDHC 71 #define CONFIG_FSL_USDHC 72 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 73 #define CONFIG_SYS_FSL_USDHC_NUM 2 74 75 #define CONFIG_MMC 76 #define CONFIG_CMD_MMC 77 #define CONFIG_GENERIC_MMC 78 #define CONFIG_BOUNCE_BUFFER 79 #define CONFIG_CMD_EXT2 80 #define CONFIG_CMD_EXT4 81 #define CONFIG_CMD_EXT4_WRITE 82 #define CONFIG_CMD_FAT 83 #define CONFIG_DOS_PARTITION 84 85 #ifdef CONFIG_MX6Q 86 #define CONFIG_CMD_SATA 87 #endif 88 89 /* 90 * SATA Configs 91 */ 92 #ifdef CONFIG_CMD_SATA 93 #define CONFIG_DWC_AHSATA 94 #define CONFIG_SYS_SATA_MAX_DEVICE 1 95 #define CONFIG_DWC_AHSATA_PORT_ID 0 96 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 97 #define CONFIG_LBA48 98 #define CONFIG_LIBATA 99 #endif 100 101 #define CONFIG_CMD_PING 102 #define CONFIG_CMD_DHCP 103 #define CONFIG_CMD_MII 104 #define CONFIG_CMD_NET 105 #define CONFIG_FEC_MXC 106 #define CONFIG_MII 107 #define IMX_FEC_BASE ENET_BASE_ADDR 108 #define CONFIG_FEC_XCV_TYPE RGMII 109 #define CONFIG_ETHPRIME "FEC" 110 #define CONFIG_FEC_MXC_PHYADDR 6 111 #define CONFIG_PHYLIB 112 #define CONFIG_PHY_MICREL 113 #define CONFIG_PHY_MICREL_KSZ9021 114 115 /* USB Configs */ 116 #define CONFIG_CMD_USB 117 #define CONFIG_CMD_FAT 118 #define CONFIG_USB_EHCI 119 #define CONFIG_USB_EHCI_MX6 120 #define CONFIG_USB_STORAGE 121 #define CONFIG_USB_HOST_ETHER 122 #define CONFIG_USB_ETHER_ASIX 123 #define CONFIG_USB_ETHER_MCS7830 124 #define CONFIG_USB_ETHER_SMSC95XX 125 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 126 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 127 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 128 #define CONFIG_MXC_USB_FLAGS 0 129 #define CONFIG_USB_KEYBOARD 130 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP 131 132 /* Miscellaneous commands */ 133 #define CONFIG_CMD_BMODE 134 #define CONFIG_CMD_SETEXPR 135 136 /* Framebuffer and LCD */ 137 #define CONFIG_VIDEO 138 #define CONFIG_VIDEO_IPUV3 139 #define CONFIG_CFB_CONSOLE 140 #define CONFIG_VGA_AS_SINGLE_DEVICE 141 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 142 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 143 #define CONFIG_VIDEO_BMP_RLE8 144 #define CONFIG_SPLASH_SCREEN 145 #define CONFIG_BMP_16BPP 146 #define CONFIG_IPUV3_CLK 260000000 147 #define CONFIG_CMD_HDMIDETECT 148 #define CONFIG_CONSOLE_MUX 149 #define CONFIG_IMX_HDMI 150 #define CONFIG_IMX_VIDEO_SKIP 151 152 /* allow to overwrite serial and ethaddr */ 153 #define CONFIG_ENV_OVERWRITE 154 #define CONFIG_CONS_INDEX 1 155 #define CONFIG_BAUDRATE 115200 156 157 /* Command definition */ 158 #include <config_cmd_default.h> 159 160 #undef CONFIG_CMD_IMLS 161 162 #define CONFIG_BOOTDELAY 1 163 164 #define CONFIG_PREBOOT "" 165 166 #define CONFIG_LOADADDR 0x12000000 167 #define CONFIG_SYS_TEXT_BASE 0x17800000 168 169 #ifdef CONFIG_CMD_SATA 170 #define CONFIG_DRIVE_SATA "sata " 171 #else 172 #define CONFIG_DRIVE_SATA 173 #endif 174 175 #ifdef CONFIG_CMD_MMC 176 #define CONFIG_DRIVE_MMC "mmc " 177 #else 178 #define CONFIG_DRIVE_MMC 179 #endif 180 181 #ifdef CONFIG_USB_STORAGE 182 #define CONFIG_DRIVE_USB "usb " 183 #else 184 #define CONFIG_DRIVE_USB 185 #endif 186 187 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB 188 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC 189 190 #if defined(CONFIG_SABRELITE) 191 #define CONFIG_EXTRA_ENV_SETTINGS \ 192 "script=boot.scr\0" \ 193 "uimage=uImage\0" \ 194 "console=ttymxc1\0" \ 195 "fdt_high=0xffffffff\0" \ 196 "initrd_high=0xffffffff\0" \ 197 "fdt_file=imx6q-sabrelite.dtb\0" \ 198 "fdt_addr=0x18000000\0" \ 199 "boot_fdt=try\0" \ 200 "ip_dyn=yes\0" \ 201 "mmcdevs=0 1\0" \ 202 "mmcpart=1\0" \ 203 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ 204 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 205 "root=${mmcroot}\0" \ 206 "loadbootscript=" \ 207 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 208 "bootscript=echo Running bootscript from mmc ...; " \ 209 "source\0" \ 210 "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ 211 "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 212 "mmcboot=echo Booting from mmc ...; " \ 213 "run mmcargs; " \ 214 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 215 "if run loadfdt; then " \ 216 "bootm ${loadaddr} - ${fdt_addr}; " \ 217 "else " \ 218 "if test ${boot_fdt} = try; then " \ 219 "bootm; " \ 220 "else " \ 221 "echo WARN: Cannot load the DT; " \ 222 "fi; " \ 223 "fi; " \ 224 "else " \ 225 "bootm; " \ 226 "fi;\0" \ 227 "netargs=setenv bootargs console=${console},${baudrate} " \ 228 "root=/dev/nfs " \ 229 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 230 "netboot=echo Booting from net ...; " \ 231 "run netargs; " \ 232 "if test ${ip_dyn} = yes; then " \ 233 "setenv get_cmd dhcp; " \ 234 "else " \ 235 "setenv get_cmd tftp; " \ 236 "fi; " \ 237 "${get_cmd} ${uimage}; " \ 238 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 239 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 240 "bootm ${loadaddr} - ${fdt_addr}; " \ 241 "else " \ 242 "if test ${boot_fdt} = try; then " \ 243 "bootm; " \ 244 "else " \ 245 "echo WARN: Cannot load the DT; " \ 246 "fi; " \ 247 "fi; " \ 248 "else " \ 249 "bootm; " \ 250 "fi;\0" 251 252 #define CONFIG_BOOTCOMMAND \ 253 "for mmcdev in ${mmcdevs}; do " \ 254 "mmc dev ${mmcdev}; " \ 255 "if mmc rescan; then " \ 256 "if run loadbootscript; then " \ 257 "run bootscript; " \ 258 "else " \ 259 "if run loaduimage; then " \ 260 "run mmcboot; " \ 261 "fi; " \ 262 "fi; " \ 263 "fi; " \ 264 "done; " \ 265 "run netboot; " 266 #else 267 #define CONFIG_EXTRA_ENV_SETTINGS \ 268 "bootdevs=" CONFIG_DRIVE_TYPES "\0" \ 269 "umsdevs=" CONFIG_UMSDEVS "\0" \ 270 "console=ttymxc1\0" \ 271 "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ 272 "sf erase 0xc0000 0x2000 && " \ 273 "echo restored environment to factory default ; fi\0" \ 274 "bootcmd=for dtype in ${bootdevs}" \ 275 "; do " \ 276 "if itest.s \"xusb\" == \"x${dtype}\" ; then " \ 277 "usb start ;" \ 278 "fi; " \ 279 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ 280 "load " \ 281 "${dtype} ${disk}:1 " \ 282 "10008000 " \ 283 "/6x_bootscript" \ 284 "&& source 10008000 ; " \ 285 "done ; " \ 286 "done; " \ 287 "setenv stdout serial,vga ; " \ 288 "echo ; echo 6x_bootscript not found ; " \ 289 "echo ; echo serial console at 115200, 8N1 ; echo ; " \ 290 "echo details at http://boundarydevices.com/6q_bootscript ; " \ 291 "setenv stdout serial;" \ 292 "setenv stdin serial,usbkbd;" \ 293 "for dtype in ${umsdevs} ; do " \ 294 "if itest.s sata == ${dtype}; then " \ 295 "initcmd='sata init' ;" \ 296 "else " \ 297 "initcmd='mmc rescan' ;" \ 298 "fi; " \ 299 "for disk in 0 1 ; do " \ 300 "if $initcmd && $dtype dev $disk ; then " \ 301 "setenv stdout serial,vga; " \ 302 "echo expose ${dtype} ${disk} " \ 303 "over USB; " \ 304 "ums 0 $dtype $disk ;" \ 305 "fi; " \ 306 " done; " \ 307 "done ;" \ 308 "setenv stdout serial,vga; " \ 309 "echo no block devices found;" \ 310 "\0" \ 311 "initrd_high=0xffffffff\0" \ 312 "upgradeu=for dtype in ${bootdevs}" \ 313 "; do " \ 314 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ 315 "load ${dtype} ${disk}:1 10008000 " \ 316 "/6x_upgrade " \ 317 "&& source 10008000 ; " \ 318 "done ; " \ 319 "done\0" \ 320 321 #endif 322 /* Miscellaneous configurable options */ 323 #define CONFIG_SYS_LONGHELP 324 #define CONFIG_SYS_HUSH_PARSER 325 #define CONFIG_SYS_PROMPT "U-Boot > " 326 #define CONFIG_AUTO_COMPLETE 327 #define CONFIG_SYS_CBSIZE 1024 328 329 /* Print Buffer Size */ 330 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 331 #define CONFIG_SYS_MAXARGS 48 332 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 333 334 #define CONFIG_SYS_MEMTEST_START 0x10000000 335 #define CONFIG_SYS_MEMTEST_END 0x10010000 336 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 337 338 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 339 340 #define CONFIG_CMDLINE_EDITING 341 342 /* Physical Memory Map */ 343 #define CONFIG_NR_DRAM_BANKS 1 344 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 345 346 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 347 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 348 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 349 350 #define CONFIG_SYS_INIT_SP_OFFSET \ 351 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 352 #define CONFIG_SYS_INIT_SP_ADDR \ 353 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 354 355 /* FLASH and environment organization */ 356 #define CONFIG_SYS_NO_FLASH 357 358 #define CONFIG_ENV_SIZE (8 * 1024) 359 360 #if defined(CONFIG_SABRELITE) 361 #define CONFIG_ENV_IS_IN_MMC 362 #else 363 #define CONFIG_ENV_IS_IN_SPI_FLASH 364 #endif 365 366 #if defined(CONFIG_ENV_IS_IN_MMC) 367 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 368 #define CONFIG_SYS_MMC_ENV_DEV 0 369 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) 370 #define CONFIG_ENV_OFFSET (768 * 1024) 371 #define CONFIG_ENV_SECT_SIZE (8 * 1024) 372 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 373 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 374 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 375 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 376 #endif 377 378 #define CONFIG_OF_LIBFDT 379 #define CONFIG_CMD_BOOTZ 380 381 #ifndef CONFIG_SYS_DCACHE_OFF 382 #define CONFIG_CMD_CACHE 383 #endif 384 385 #define CONFIG_CMD_BMP 386 387 #define CONFIG_CMD_TIME 388 #define CONFIG_CMD_MEMTEST 389 #define CONFIG_SYS_ALT_MEMTEST 390 391 #define CONFIG_CMD_BOOTZ 392 #define CONFIG_SUPPORT_RAW_INITRD 393 #define CONFIG_CMD_FS_GENERIC 394 395 /* 396 * PCI express 397 */ 398 #ifdef CONFIG_CMD_PCI 399 #define CONFIG_PCI 400 #define CONFIG_PCI_PNP 401 #define CONFIG_PCI_SCAN_SHOW 402 #define CONFIG_PCIE_IMX 403 #endif 404 405 #define CONFIG_CMD_ELF 406 407 #define CONFIG_USB_GADGET 408 #define CONFIG_CMD_USB_MASS_STORAGE 409 #define CONFIG_USB_GADGET_MASS_STORAGE 410 #define CONFIG_USBDOWNLOAD_GADGET 411 #define CONFIG_USB_GADGET_VBUS_DRAW 2 412 413 /* Netchip IDs */ 414 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 415 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 416 #define CONFIG_G_DNL_MANUFACTURER "Boundary" 417 418 #define CONFIG_CMD_FASTBOOT 419 #define CONFIG_ANDROID_BOOT_IMAGE 420 #define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR 421 #define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 422 423 #endif /* __CONFIG_H */ 424