xref: /openbmc/u-boot/include/configs/nitrogen6x.h (revision 83bf0057)
1 /*
2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Boundary Devices Nitrogen6X
5  * and Freescale i.MX6Q Sabre Lite boards.
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 #include "mx6_common.h"
14 
15 #define CONFIG_MACH_TYPE	3769
16 
17 /* Size of malloc() pool */
18 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
19 
20 #define CONFIG_BOARD_EARLY_INIT_F
21 #define CONFIG_MISC_INIT_R
22 #define CONFIG_CI_UDC
23 #define CONFIG_USBD_HS
24 #define CONFIG_USB_GADGET_DUALSPEED
25 #define CONFIG_USB_ETHER
26 #define CONFIG_USB_ETH_CDC
27 #define CONFIG_NETCONSOLE
28 
29 #define CONFIG_MXC_UART
30 #define CONFIG_MXC_UART_BASE	       UART2_BASE
31 
32 #define CONFIG_CMD_SF
33 #ifdef CONFIG_CMD_SF
34 #define CONFIG_SPI_FLASH_SST
35 #define CONFIG_MXC_SPI
36 #define CONFIG_SF_DEFAULT_BUS  0
37 #define CONFIG_SF_DEFAULT_CS   0
38 #define CONFIG_SF_DEFAULT_SPEED 25000000
39 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
40 #endif
41 
42 /* I2C Configs */
43 #define CONFIG_CMD_I2C
44 #define CONFIG_SYS_I2C
45 #define CONFIG_SYS_I2C_MXC
46 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
47 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
48 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
49 #define CONFIG_SYS_I2C_SPEED		100000
50 #define CONFIG_I2C_EDID
51 
52 /* MMC Configs */
53 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
54 #define CONFIG_SYS_FSL_USDHC_NUM       2
55 
56 #ifdef CONFIG_MX6Q
57 #define CONFIG_CMD_SATA
58 #endif
59 
60 /*
61  * SATA Configs
62  */
63 #ifdef CONFIG_CMD_SATA
64 #define CONFIG_DWC_AHSATA
65 #define CONFIG_SYS_SATA_MAX_DEVICE	1
66 #define CONFIG_DWC_AHSATA_PORT_ID	0
67 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
68 #define CONFIG_LBA48
69 #define CONFIG_LIBATA
70 #endif
71 
72 #define CONFIG_CMD_PING
73 #define CONFIG_CMD_DHCP
74 #define CONFIG_CMD_MII
75 #define CONFIG_FEC_MXC
76 #define CONFIG_MII
77 #define IMX_FEC_BASE			ENET_BASE_ADDR
78 #define CONFIG_FEC_XCV_TYPE		RGMII
79 #define CONFIG_ETHPRIME			"FEC"
80 #define CONFIG_FEC_MXC_PHYADDR		6
81 #define CONFIG_PHYLIB
82 #define CONFIG_PHY_MICREL
83 #define CONFIG_PHY_MICREL_KSZ9021
84 
85 /* USB Configs */
86 #define CONFIG_CMD_USB
87 #define CONFIG_USB_EHCI
88 #define CONFIG_USB_EHCI_MX6
89 #define CONFIG_USB_STORAGE
90 #define CONFIG_USB_HOST_ETHER
91 #define CONFIG_USB_ETHER_ASIX
92 #define CONFIG_USB_ETHER_MCS7830
93 #define CONFIG_USB_ETHER_SMSC95XX
94 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
95 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
96 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
97 #define CONFIG_MXC_USB_FLAGS	0
98 #define CONFIG_USB_KEYBOARD
99 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
100 
101 /* Miscellaneous commands */
102 #define CONFIG_CMD_BMODE
103 
104 /* Framebuffer and LCD */
105 #define CONFIG_VIDEO
106 #define CONFIG_VIDEO_IPUV3
107 #define CONFIG_CFB_CONSOLE
108 #define CONFIG_VGA_AS_SINGLE_DEVICE
109 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
110 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
111 #define CONFIG_VIDEO_BMP_RLE8
112 #define CONFIG_SPLASH_SCREEN
113 #define CONFIG_SPLASH_SCREEN_ALIGN
114 #define CONFIG_VIDEO_BMP_GZIP
115 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
116 #define CONFIG_BMP_16BPP
117 #define CONFIG_IPUV3_CLK 260000000
118 #define CONFIG_CMD_HDMIDETECT
119 #define CONFIG_CONSOLE_MUX
120 #define CONFIG_IMX_HDMI
121 #define CONFIG_IMX_VIDEO_SKIP
122 
123 #define CONFIG_PREBOOT                 ""
124 
125 #ifdef CONFIG_CMD_SATA
126 #define CONFIG_DRIVE_SATA "sata "
127 #else
128 #define CONFIG_DRIVE_SATA
129 #endif
130 
131 #ifdef CONFIG_CMD_MMC
132 #define CONFIG_DRIVE_MMC "mmc "
133 #else
134 #define CONFIG_DRIVE_MMC
135 #endif
136 
137 #ifdef CONFIG_USB_STORAGE
138 #define CONFIG_DRIVE_USB "usb "
139 #else
140 #define CONFIG_DRIVE_USB
141 #endif
142 
143 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
144 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
145 
146 #if defined(CONFIG_SABRELITE)
147 #define CONFIG_EXTRA_ENV_SETTINGS \
148 	"script=boot.scr\0" \
149 	"uimage=uImage\0" \
150 	"console=ttymxc1\0" \
151 	"fdt_high=0xffffffff\0" \
152 	"initrd_high=0xffffffff\0" \
153 	"fdt_file=imx6q-sabrelite.dtb\0" \
154 	"fdt_addr=0x18000000\0" \
155 	"boot_fdt=try\0" \
156 	"ip_dyn=yes\0" \
157 	"mmcdevs=0 1\0" \
158 	"mmcpart=1\0" \
159 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
160 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
161 		"root=${mmcroot}\0" \
162 	"loadbootscript=" \
163 		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
164 	"bootscript=echo Running bootscript from mmc ...; " \
165 		"source\0" \
166 	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
167 	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
168 	"mmcboot=echo Booting from mmc ...; " \
169 		"run mmcargs; " \
170 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
171 			"if run loadfdt; then " \
172 				"bootm ${loadaddr} - ${fdt_addr}; " \
173 			"else " \
174 				"if test ${boot_fdt} = try; then " \
175 					"bootm; " \
176 				"else " \
177 					"echo WARN: Cannot load the DT; " \
178 				"fi; " \
179 			"fi; " \
180 		"else " \
181 			"bootm; " \
182 		"fi;\0" \
183 	"netargs=setenv bootargs console=${console},${baudrate} " \
184 		"root=/dev/nfs " \
185 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
186 		"netboot=echo Booting from net ...; " \
187 		"run netargs; " \
188 		"if test ${ip_dyn} = yes; then " \
189 			"setenv get_cmd dhcp; " \
190 		"else " \
191 			"setenv get_cmd tftp; " \
192 		"fi; " \
193 		"${get_cmd} ${uimage}; " \
194 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
195 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
196 				"bootm ${loadaddr} - ${fdt_addr}; " \
197 			"else " \
198 				"if test ${boot_fdt} = try; then " \
199 					"bootm; " \
200 				"else " \
201 					"echo WARN: Cannot load the DT; " \
202 				"fi; " \
203 			"fi; " \
204 		"else " \
205 			"bootm; " \
206 		"fi;\0"
207 
208 #define CONFIG_BOOTCOMMAND \
209 	"for mmcdev in ${mmcdevs}; do " \
210 		"mmc dev ${mmcdev}; " \
211 		"if mmc rescan; then " \
212 			"if run loadbootscript; then " \
213 				"run bootscript; " \
214 			"else " \
215 				"if run loaduimage; then " \
216 					"run mmcboot; " \
217 				"fi; " \
218 			"fi; " \
219 		"fi; " \
220 	"done; " \
221 	"run netboot; "
222 #else
223 #define CONFIG_EXTRA_ENV_SETTINGS \
224 	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
225 	"umsdevs=" CONFIG_UMSDEVS "\0" \
226 	"console=ttymxc1\0" \
227 	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
228 		"sf erase 0xc0000 0x2000 && " \
229 		"echo restored environment to factory default ; fi\0" \
230 	"bootcmd=for dtype in ${bootdevs}" \
231 		"; do " \
232 			"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
233 				"usb start ;" \
234 			"fi; " \
235 			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
236 				"load " \
237 					"${dtype} ${disk}:1 " \
238 					"10008000 " \
239 					"/6x_bootscript" \
240 					"&& source 10008000 ; " \
241 			"done ; " \
242 		"done; " \
243 		"setenv stdout serial,vga ; " \
244 		"echo ; echo 6x_bootscript not found ; " \
245 		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
246 		"echo details at http://boundarydevices.com/6q_bootscript ; " \
247 		"setenv stdout serial;" \
248 		"setenv stdin serial,usbkbd;" \
249 		"for dtype in ${umsdevs} ; do " \
250 			"if itest.s sata == ${dtype}; then " \
251 				"initcmd='sata init' ;" \
252 			"else " \
253 				"initcmd='mmc rescan' ;" \
254 			"fi; " \
255 			"for disk in 0 1 ; do " \
256 				"if $initcmd && $dtype dev $disk ; then " \
257 					"setenv stdout serial,vga; " \
258 					"echo expose ${dtype} ${disk} " \
259 						"over USB; " \
260 					"ums 0 $dtype $disk ;" \
261 				"fi; " \
262 		"	done; " \
263 		"done ;" \
264 		"setenv stdout serial,vga; " \
265 		"echo no block devices found;" \
266 		"\0" \
267 	"initrd_high=0xffffffff\0" \
268 	"upgradeu=for dtype in ${bootdevs}" \
269 		"; do " \
270 		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
271 			"load ${dtype} ${disk}:1 10008000 " \
272 				"/6x_upgrade " \
273 				"&& source 10008000 ; " \
274 		"done ; " \
275 	"done\0" \
276 
277 #endif
278 /* Miscellaneous configurable options */
279 #define CONFIG_SYS_MEMTEST_START       0x10000000
280 #define CONFIG_SYS_MEMTEST_END	       0x10010000
281 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
282 
283 /* Physical Memory Map */
284 #define CONFIG_NR_DRAM_BANKS	       1
285 #define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR
286 
287 #define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
288 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
289 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
290 
291 #define CONFIG_SYS_INIT_SP_OFFSET \
292 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
293 #define CONFIG_SYS_INIT_SP_ADDR \
294 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
295 
296 /* Environment organization */
297 #define CONFIG_ENV_SIZE			(8 * 1024)
298 
299 #if defined(CONFIG_SABRELITE)
300 #define CONFIG_ENV_IS_IN_MMC
301 #else
302 #define CONFIG_ENV_IS_IN_SPI_FLASH
303 #endif
304 
305 #if defined(CONFIG_ENV_IS_IN_MMC)
306 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
307 #define CONFIG_SYS_MMC_ENV_DEV		0
308 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
309 #define CONFIG_ENV_OFFSET		(768 * 1024)
310 #define CONFIG_ENV_SECT_SIZE		(8 * 1024)
311 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
312 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
313 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
314 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
315 #endif
316 
317 #define CONFIG_CMD_BMP
318 
319 #define CONFIG_CMD_TIME
320 #define CONFIG_CMD_MEMTEST
321 #define CONFIG_SYS_ALT_MEMTEST
322 
323 /*
324  * PCI express
325  */
326 #ifdef CONFIG_CMD_PCI
327 #define CONFIG_PCI
328 #define CONFIG_PCI_PNP
329 #define CONFIG_PCI_SCAN_SHOW
330 #define CONFIG_PCIE_IMX
331 #endif
332 
333 
334 #define CONFIG_USB_GADGET
335 #define CONFIG_CMD_USB_MASS_STORAGE
336 #define CONFIG_USB_FUNCTION_MASS_STORAGE
337 #define CONFIG_USB_GADGET_DOWNLOAD
338 #define CONFIG_USB_GADGET_VBUS_DRAW	2
339 
340 /* Netchip IDs */
341 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
342 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
343 #define CONFIG_G_DNL_MANUFACTURER "Boundary"
344 
345 #define CONFIG_USB_FUNCTION_FASTBOOT
346 #define CONFIG_CMD_FASTBOOT
347 #define CONFIG_ANDROID_BOOT_IMAGE
348 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
349 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
350 
351 #endif	       /* __CONFIG_H */
352